Related references
Note: Only part of the references are listed.Effect of rare earth Ce addition on microstructure and mechanical properties of titanium alloy Ti-6Al-4V
Yi Xu et al.
MATERIALS LETTERS (2023)
Superior superplasticity and multiple accommodation mechanisms in TiB reinforced near-a titanium matrix composites
Peikun Qiu et al.
COMPOSITES PART B-ENGINEERING (2022)
Enhanced strength and ductility in Ti46Al4Nb1Mo alloys via boron addition
Yingmei Tan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Insight into the formation mechanism and interaction of matrix/TiB whisker textures and their synergistic effect on property anisotropy in titanium matrix composites
Jianwen Le et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Improvement of microstructure homogenous and tensile properties of powder hot isostatic pressed TA15 titanium alloy via heat treatment
Yichao Wang et al.
MATERIALS LETTERS (2022)
Insights into in-situ TiB/dual-phase Ti alloy interface and its high load-bearing capacity
Qi An et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding
Zhiqiang Zhang et al.
MATERIALS CHARACTERIZATION (2022)
Homogeneous a-precipitation and enhanced plasticity in Ti-6Cr-5Mo-5V-4Al high-strength metastable titanium alloy with heterogenous fl-structure
Guoxiang Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Embedding boron into Ti powder for direct laser deposited titanium matrix composite: Microstructure evolution and the role of nano-TiB network structure
Minhan Fang et al.
COMPOSITES PART B-ENGINEERING (2021)
A novel deformation mechanism in Ti-V binary metastable β-Ti alloys: Deformation kinking promoted by dislocation accumulation
Keer Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Influences of boron contents on microstructures and mechanical properties of as-casted near α titanium alloy
Xiaozhao Ma et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Cryogenic temperature equal channel angular pressing of pure titanium: microstructure and homogeneity
Hongfei Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Refining prior-I3 grains of Ti-6Al-4V alloy through yttrium addition
Duyao Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructure, texture and hardness of a metastable β-titanium alloy after bar-rolling and annealing
B. Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Boron modified titanium alloys
Gaurav Singh et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Effect of TiB particles on the beta recrystallization behavior of the Ti-2Al-9.2Mo-2Fe-0.1B metastable beta titanium alloy
Rong Chen et al.
MATERIALS CHARACTERIZATION (2019)
Refining As-cast β-Ti Grains Through ZrN Inoculation
Dong Qiu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Nonuniform Recrystallization and Growth Behavior of Grains Dominated by Grain Misorientation and Interfacial Energy in Metastable β Titanium Alloy
Sensen Huang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field
X. G. Fan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High tensile-strength and ductile titanium matrix composites strengthened by TiB nanowires
Liqing Huang et al.
SCRIPTA MATERIALIA (2017)
Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions
M. J. Bermingham et al.
ACTA MATERIALIA (2015)
Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures
Hongyi Zhan et al.
MATERIALS CHARACTERIZATION (2015)
Characterization of fracture and deformation mechanism in a high strength beta titanium alloy Ti-10-2-3 using EBSD technique
Jalaj Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of boron on the fracture behavior and ductility of cast Ti-6Al-4V alloys
J. H. Luan et al.
SCRIPTA MATERIALIA (2015)
An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy
Hongchao Kou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The effect of boron addition on microstructure and mechanical properties of biomedical Ti35Nb6Ta alloy
Jaroslav Malek et al.
MATERIALS CHARACTERIZATION (2014)
The dynamic response of a β titanium alloy to high strain rates and elevated temperatures
Hongyi Zhan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Enhancement in creep resistance of Ti-6Al-4V alloy due to boron addition
Gaurav Singh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Perspectives on Titanium Science and Technology
Dipankar Banerjee et al.
ACTA MATERIALIA (2013)
A study on the microstructures and tensile properties of new beta high strength titanium alloy
Cheng-Lin Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effect of solution temperature on microstructures and tensile properties of high strength Ti-6Cr-5Mo-5V-4Al alloy
Cheng-Lin Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Structure-property correlation of a boron and carbon modified as cast β titanium alloy
R. Sarkar et al.
PHILOSOPHICAL MAGAZINE (2013)
Thermodynamic aspects of grain growth restriction in multicomponent alloy solidification
R. Schmid-Fetzer et al.
ACTA MATERIALIA (2011)
Effect of boron on microstructure and mechanical properties of thermomechanically processed near alpha titanium alloy Ti-1100
V. K. Chandravanshi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Effect of Minor Additions of Boron on Microstructure and Mechanical Properties of As-Cast Near α Titanium Alloy
V. K. Chandravanshi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Beryllium as a grain refiner in titanium alloys
M. J. Bermingham et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Study of texture evolution in metastable β-Ti alloy as a function of strain path and its effect on α transformation texture
Nilesh P. Gurao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
The influence of trace boron addition on grain growth kinetics of the beta phase in the beta titanium alloy Ti-15Mo-2.6Nb-3Al 0.2Si
B. Cherukuri et al.
SCRIPTA MATERIALIA (2009)
Texture inhomogeneity in a Ti-Nb-based β-titanium alloy after warm rolling and recrystallization
B. Sander et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effects of boron on microstructure in cast titanium alloys
M. J. Bermingham et al.
SCRIPTA MATERIALIA (2008)
Stacking faults formation mechanism of in situ synthesized TiB whiskers
Haibo Feng et al.
SCRIPTA MATERIALIA (2006)
Growth mechanism of in situ TiB whiskers in spark plasma sintered TiB/Ti metal matrix composites
HB Feng et al.
CRYSTAL GROWTH & DESIGN (2006)
First principles determination of elastic constants and chemical bonding of titanium boride (TiB) on the basis of density functional theory
KB Panda et al.
ACTA MATERIALIA (2006)
The use of β titanium alloys in the aerospace industry
RR Boyer et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2005)
Processing, microstructure, and properties of β titanium alloys modified with boron
S Tamirisakandala et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2005)
Grain refinement of cast titanium alloys via trace boron addition
S Tamirisakandala et al.
SCRIPTA MATERIALIA (2005)
Titanium alloys for aerospace applications
M Peters et al.
ADVANCED ENGINEERING MATERIALS (2003)
Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements
S Gorsse et al.
ACTA MATERIALIA (2003)
Texture evolution in vacuum arc remelted ingots of Ti-6Al-4V
MG Glavicic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites
HJ Ryu et al.
JOURNAL OF MATERIALS RESEARCH (2003)
Microstructural characterization of TiB in in situ synthesized titanium matrix composites prepared by common casting technique
WJ Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)