4.4 Article

Plasticized polyvinyl chloride/melamine-cyanurate modified Mg(OH)2@bentonite nanocomposites; mechanical, thermal, and flame retardant properties

Related references

Note: Only part of the references are listed.
Review Materials Science, Composites

Development of waste rice husk/PVC/GO nanocomposite using TA-CaO adduct and ESO as green additives

Nipu Dutta et al.

Summary: In this study, a biobased composite utilizing waste rice husk ash and polyvinyl chloride was prepared, and the addition of graphene oxide nanomaterial improved the properties of the composite.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

Article Chemistry, Applied

Synergistic flame retardancy of ZnO and piperazine pyrophosphate/melamine cyanurate in polypropylene

Wenhao Liu et al.

Summary: It has been found that zinc oxide (ZnO) exhibits exceptional synergy with other flame retardants in polypropylene composites, leading to significant improvements in flame retardant efficiency and suppression of flame propagation. Additionally, ZnO can effectively inhibit the production of smoke and carbon monoxide (CO).

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Article Polymer Science

Simultaneous modification of hydrotalcite-silicate nanolayers as reinforcement of a new polyamide: thermal properties and flammability study

Mohsen Hajibeygi et al.

Summary: New polyamide/clay-layered double hydroxide nanocomposites (PACLN) were successfully prepared and characterized for their thermal and combustion properties. The results showed that PACLN exhibited improved heat resistance and thermal stability due to the effective dispersion of clay-layered double hydroxide nanosheets in the polyamide matrix.

POLYMER INTERNATIONAL (2023)

Article Thermodynamics

Improving the properties of rigid polyvinyl chloride with surface-treated Mg(OH)2 nanoparticles and ester-functionalized organic additive

Mohsen Hajibeygi et al.

Summary: A tetra-ester functionalized organic compound was synthesized to restore the mechanical properties of PVC/Mg(OH)(2) nanocomposites. The organically modified Mg(OH)(2) nanoparticles were successfully obtained through surface modification of Mg(OH)(2) nanoparticles using a methylated tetra-phenol organic compound. The addition of tetra-ester and organically modified Mg(OH)(2) nanoparticles improved the thermal and mechanical properties of PVC.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2023)

Article Chemistry, Applied

Polyphosphazene hybridized perovskite copper hydroxystannate microspheres effectively improve the flame retardant and mechanical properties of Poly(vinyl Chloride) Resin

Le Yang et al.

Summary: To reduce the fire hazard of flexible PVC, this study synthesized perovskite-type CuSn(OH)(6) microspheres and fabricated an organic-inorganic hybrid microsphere (CuSn(OH)(6)@PZS) with core-shell structure. CuSn(OH)(6)@PZS demonstrated the greatest reduction in total heat release, while CuSn(OH)(6) alone achieved the best smoke suppression effect. The PVC composites exhibited improved limiting oxygen index value and significant decrease in peak heat release rate and total smoke production during combustion. The presence of the PZS coating also improved the interfacial compatibility with PVC and enhanced mechanical properties.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Article Polymer Science

Improving flame retardant and smoke suppression function of ethylene vinyl acetate by combining the piperazine pyrophosphate, expandable graphite and melamine phosphate

Haowen Sun et al.

Summary: The flame retardant EVA composites were prepared by melt blending ethylene vinyl acetate copolymer with expandable graphite (EG), pyrophosphate piperazine (PAPP), and melamine polyphosphate (MPP). The optimal flame retardant effect was achieved with a PAPP/EG/MPP mixture of 2:2:1 mass ratio. EVA composites with an additive amount of 25 wt% reached UL-94 V-0 level (1.6 mm) and had a limiting oxygen index (LOI) of 35.2%. The incorporation of PAPP, EG, and MPP significantly reduced the heat release rate, total heat release, and total smoke release of the composites.

EUROPEAN POLYMER JOURNAL (2023)

Article Chemistry, Applied

Effects of TiO2@ZnAlSn/PETMP on the properties of plasticized polyvinyl chloride composites

Li Gao et al.

Summary: By incorporating nanomaterials loaded with TiO2@ZnAlSn and PETMP into plasticized PVC composites, this study successfully improved the mechanical properties, thermal stability, flame retardancy, and smoke suppression of the composites. Experimental and theoretical investigations provided evidence for the effectiveness of this approach.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Hydrazide-hydrazone-modified polyamide as reinforcement and dispersion aid for poly(lactic acid)/hydroxyapatite nanocomposites

Mohsen Hajibeygi et al.

Summary: Hydrazide-hydrazone based polyamide (HHPA) and surface modified hydroxyapatite (SMHA) were successfully synthesized and used to fabricate PLA nanocomposites with enhanced heat and combustion resistance, mechanical strength, and gas barrier properties. The synergistic effect of SMHA and HHPA significantly improved the performance of PLA.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Polymer Science

Effects of dioctyl phthalate on the properties of poly(vinyl chloride)/organically modified montmorillonite nanocomposites

Cheng-Ho Chen et al.

Summary: The study found that increasing the amount of DOP significantly decreases the Young's modulus and tensile strength of PVC/O-MMT/DOP nanocomposites, lowers the thermal degradation onset temperature and glass transition temperature, but increases the elongation at break and the first thermal degradation weight loss. With increasing DOP loading, the properties of the nanocomposites transition from rigid to semi-rigid, and finally to flexible.

POLYMER BULLETIN (2021)

Article Polymer Science

Fabrication and study of thermal and combustion resistance of DOPO-functionalized polyamide reinforced with organo-modified Mg(OH)2 nanoparticles

Mohsen Hajibeygi et al.

Summary: DODA was synthesized to prepare DOPA and modify Mg(OH)(2) nanoparticles for the fabrication of nanocomposites. The uniform dispersion of nanoparticles in the polymer matrix was observed, contributing to the enhanced thermal and combustion properties of the composites.

POLYMER INTERNATIONAL (2021)

Article Polymer Science

Biodegradable PLA based nanocomposites for packaging applications: The effects of organo-modified bentonite concentration

Edla Maria Bezerra Lima et al.

Summary: The use of modified clays in biodegradable nanocomposites based on polylactic acid can increase material crystallinity but decrease material elongation and strength.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Article Chemistry, Physical

Flame-retardant ethylene vinyl acetate composite materials by combining additions of aluminum hydroxide and melamine cyanurate: Preparation and characteristic evaluations

Siyi Xu et al.

Summary: This study proposed a strategy to combine aluminum hydroxide and melamine cyanurate with ethylene vinyl acetate to prepare EVA composite materials with high flame resistance. The addition of melamine cyanurate improved the thermal stability and flame resistance of EVA, with the optimal EVA-60-40 composition displaying the best fire resistance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Materials Science, Composites

Polyamide nanocomposites containing hydrazide-hydrazone group reinforced with functionalized polyethyleneimine modified Mg(OH)2 nanoparticles: Study on thermal properties, combustion resistance, and lead ion adsorption

Mohsen Hajibeygi et al.

Summary: The study investigated the preparation of polyamide nanocomposites (PANC) containing hydrazide-hydrazone groups and their lead ions adsorption efficiency. The results showed that PANC exhibited higher thermal resistance than neat PA in N-2 environment and the addition of FPMN efficiently increased the combustion resistance of the material.

POLYMER COMPOSITES (2021)

Review Chemistry, Multidisciplinary

An Overview of the Flame Retardants for Poly(vinyl chloride): Recent States and Perspective†

Ye-Tang Pan et al.

CHINESE JOURNAL OF CHEMISTRY (2020)

Review Engineering, Chemical

Surface modification of low-cost bentonite adsorbents-A review

Jock Asanja Alexander et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2019)

Article Environmental Sciences

Use of bentonite calcined clay as an adsorbent: equilibrium and thermodynamic study of Rhodamine B adsorption in aqueous solution

Fernanda Ribeiro dos Santos et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Chemistry, Physical

Melamine cyanurate tailored by base and its multi effects on flame retardancy of polyamide 6

Wei Tao et al.

APPLIED SURFACE SCIENCE (2018)

Article Engineering, Manufacturing

Mechanical, thermal and flame retardant properties of magnesium hydroxide filled poly(vinyl chloride) composites: The effect of filler shape

Yunhua Lu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Review Polymer Science

Epoxidized vegetable oil and bio-based materials as PVC plasticizer

Hadeel Hosney et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Article Chemistry, Multidisciplinary

A composition of phosphaphenanthrene groups-containing castor-oil-based phosphate plasticizer for PVC: Synthesis, characterization and property

Puyou Jia et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Article Materials Science, Characterization & Testing

Environmental-friendly recycled Polyester/Mg(OH)2 nanocomposite: Fire-retardancy and thermal stability

Hamdy M. Naguib

POLYMER TESTING (2018)

Proceedings Paper Engineering, Multidisciplinary

A Novel Preparation of Nano-sized hexagonal Mg(OH)2

Yongbin Chen et al.

NEW PARADIGM OF PARTICLE SCIENCE AND TECHNOLOGY, PROCEEDINGS OF THE 7TH WORLD CONGRESS ON PARTICLE TECHNOLOGY (2015)

Article Thermodynamics

Analysis of the relationship between MCC and thermal analysis results in evaluating flammability of EPS foam

Qiang Xu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

Article Engineering, Chemical

Synergistic Effect of Layered Nanofillers in Intumescent Flame-Retardant EPDM: Montmorillonite versus Layered Double Hydroxides

Zhen-Qi Shen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Article Materials Science, Composites

Polymer/clay nanocomposites and their gas barrier properties

Alena Kalendova et al.

POLYMER COMPOSITES (2013)

Article Polymer Science

Poly(ε-caprolactone)-based 'green' plasticizers for poly(vinyl choride)

Guixin Shi et al.

POLYMER DEGRADATION AND STABILITY (2011)

Article Acoustics

Synthesis and characterization of Nano-bentonite by sonochemical method

Zahra Darvishi et al.

ULTRASONICS SONOCHEMISTRY (2011)

Article Polymer Science

Material properties of nanoclay PVC composites

Walid H. Awad et al.

POLYMER (2009)

Article Chemistry, Multidisciplinary

Organo-modified magnesium hydroxide nano-needle and its polystyrene nanocomposite

Peng Liu et al.

JOURNAL OF NANOPARTICLE RESEARCH (2007)

Article Engineering, Multidisciplinary

Flame retardancy of thermoplastic polyurethane and polyvinyl chloride by organoclays

Gunter Beyer

JOURNAL OF FIRE SCIENCES (2007)

Article Materials Science, Multidisciplinary

Thermal stabilities of poly(vinyl chloride)/magnesium hydroxide (PVC/MH) composites

M. Zhao et al.

MATERIALS RESEARCH INNOVATIONS (2007)

Article Polymer Science

Thermal properties of poly(vinyl chloride)/montmorillonite nanocomposites

FL Gong et al.

POLYMER DEGRADATION AND STABILITY (2004)

Article Engineering, Chemical

Structure-property relationships in polymer blend nanocomposites

KY Lee et al.

POLYMER ENGINEERING AND SCIENCE (2004)

Article Polymer Science

Morphology and properties of PVC/clay nanocomposites via in situ emulsion polymerization

MW Pan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)