☆ 4.4 Review

Hydrogel and aerogel-based flame-retardant polymeric materials: A review

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Flame retardant and antibacterial properties of PLA/PHMG-P/APP composites

Meng Liao et al.

Summary: Poly(lactic acid) (PLA) is a widely used polymer, but its high flammability hinders its potential as a substitute. This study investigates the modification of PLA using polyhexamethyleneguanidine phosphate (PHMG-P) and ammonium polyphosphate (APP), which greatly improves its flame retardancy and antibacterial properties.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Applied

Design of nitrogen-containing organic thermal stabilizer with resistance to zinc burning and its application

Zhixuan Cui et al.

Summary: By synthesizing aminouracil zinc maleate (AM-Zn), a thermal stabilizer with a multifunctional molecular structure was obtained, which can effectively improve the thermal stability of poly(vinyl chloride) (PVC) materials. The synergistic use of AM-Zn and CaSt(2) showed superior thermal stabilization effect compared to commercially available CaSt(2)/ZnSt(2).

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

New Transparent Flame-Retardant (FR) Coatings Based on Epoxy-Aluminum Hypophosphite Nanocomposites

Fouad Laoutid et al.

Summary: This study investigated the flame-retardant effect of transparent epoxy coating with aluminum hypophosphite nanoparticles on polylactic acid sheets. The addition of these nanoparticles into the epoxy resin accelerated the degradation of the coating, resulting in increased char residue. The presence of the nanoparticles reduced the peak heat release rate significantly, leading to the formation of a homogeneous char layer with a 15 wt.% nanoparticle content. However, further increase in content did not enhance the flame-retardant properties due to the formation of structural cracks in the coating.

COATINGS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Mining Polyethylene Glycol-Based Thermosensitive Hydrogel Materials: Preparation and Flame Retardant Properties

Hao Shao et al.

Summary: A new type of efficient and anti-extinguishing material, AB-type mining thermosensitive hydrogel, was developed to inhibit coal spontaneous combustion. The optimal ratios of components A and B were determined. The AB-type thermosensitive hydrogel showed excellent flame retardant properties when the ratio of component A to component B was 1:2.

ACS OMEGA (2023)

Add to Collection

Article Engineering, Multidisciplinary

Biopolymer-based composites for tissue engineering applications: A basis for future opportunities

Payam Zarrintaj et al.

Summary: Biomimetic scaffolds play an important role in tissue regeneration and have multifunctional characteristics. Biopolymers, with their unique biocompatibility and biodegradability, are ideal candidates for tissue engineering and regenerative medicine. This article reviews different types of biopolymers and their composites, as well as their interactions with specific cells and tissues. Cellular mechanisms in tissue regeneration are also considered, along with the challenges and improvements required for using biopolymer-based composites in tissue engineering.

COMPOSITES PART B-ENGINEERING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Carrageenan-vermiculite-dimethyl methyl phosphate ternary hybrid hydrogels for firefighting

Chenyu Wang et al.

Summary: An eco-friendly and bio-based ternary hybrid hydrogel consisting of carrageenan, vermiculite, and dimethyl methyl phosphate (DMMP) was prepared through a facile one-pot method. The rheological tests showed that the hydrogel exhibited power-law fluid behavior. It was found that the optimal formulation of the hydrogel included 1 wt% carrageenan, 2 wt% DMMP, and 4 wt% vermiculite. Firefighting experiments demonstrated that the hydrogel could effectively extinguish fires by stopping chain reactions and reducing the temperature of combustion. The improved fire extinguishing efficiency was attributed to the combined effect of each component: carrageenan provided viscosity, DMMP acted as a free radical scavenger, and vermiculite acted as a barrier layer preventing resurgence.

FIRE AND MATERIALS (2023)

Add to Collection

Article Chemistry, Applied

Synergistic flame retardancy of ZnO and piperazine pyrophosphate/melamine cyanurate in polypropylene

Wenhao Liu et al.

Summary: It has been found that zinc oxide (ZnO) exhibits exceptional synergy with other flame retardants in polypropylene composites, leading to significant improvements in flame retardant efficiency and suppression of flame propagation. Additionally, ZnO can effectively inhibit the production of smoke and carbon monoxide (CO).

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Applied

Radiation crosslinked ethylene vinyl acetate composite with binary flame retardant: The improved performance and mechanisms

Xi Feng et al.

Summary: Ethylene vinyl acetate/aluminum hydroxide/melamine cyanurate (EVA/ATH/MCA) composites were prepared by melt blending, and the crosslinking ability of EVA composites was improved by electron beam irradiation. The addition of MCA reduced the heat release rate, smoke production, and increased residue content of EVA composites. The combustion process showed enhanced flame-retardant effect and improved mechanical properties and wear resistance.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Applied

In-situ growth of layered double hydroxide on montmorillonite nanosheets to improve the flame retardant performance of ABS resin

Bainian Wang et al.

Summary: In this study, LDH was grown on MMT nanosheets to obtain the hybrid LM, which showed a periodically alternating layered structure. The ABS composite containing LM and IFR exhibited improved flame-retardant performance and had lesser impacts on its mechanical properties in cone calorimeter tests.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Applied

A novel phytic acid based flame retardant to improve flame retardancy, hydrophobicity and mechanical properties of linear low-density polyethylene

Xi Feng et al.

Summary: By grafting phytic acid onto magnesium hydroxide, a flame retardant called MGPA was obtained and studied for its effects on hydrophobicity, flame retardancy, and mechanical properties of MGPA-linear low-density polyethylene (LLDPE) composites. The LLDPE composite with 50 parts of MGPA showed better flame retardancy and thermal stability, with a higher limiting oxygen index and reduced heat release rate and smoke production during combustion. It also exhibited significant elongation at break and hydrophobicity. This study highlights the potential applications of MGPA in flame-retardant LLDPE composites.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Engineering, Environmental

A wearable self-powered fire warning e-textile enabled by aramid nanofibers/MXene/silver nanowires aerogel fiber for fire protection used in firefighting clothing

Hualing He et al.

Summary: Firefighting clothing is crucial for protecting firefighters from burn injuries, but developing high fire safety clothing with an early fire alarm response remains a challenge. In this study, a wearable self-powered early fire warning e-textile was fabricated using Ti3C2Tx MXene/silver nanowires/aramid nanofibers (ANFs) aerogel fiber. This textile, integrated into firefighting clothing, can sense a wide range of temperatures and provide timely alerts to evacuate before clothing malfunctions. Additionally, a self-powered rescue location system was assembled to assist trapped firefighters in finding escape routes. This work offers a practical approach for the fabrication and application of self-powered early fire warning e-textiles in firefighting clothing for enhanced safety.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

An Ultralight Self-Powered Fire Alarm e-Textile Based on Conductive Aerogel Fiber with Repeatable Temperature Monitoring Performance Used in Firefighting Clothing

Hualing He et al.

Summary: This study developed an ultralight self-powered fire alarm electronic textile based on conductive aerogel fiber, which enables temperature monitoring and energy harvesting in firefighting clothing. It also provides fire warning and self-rescue location functions.

ACS NANO (2022)

Add to Collection

Review Chemistry, Applied

Polysaccharide-based electroconductive hydrogels: Structure, properties and biomedical applications

Mohsen Khodadadi Yazdi et al.

Summary: Architecting a suitable platform for biomedical applications involves balancing simplicity and complexity. Polysaccharides (PSAs) are crucial in various aspects of our lives, including food resources, structural materials, and energy storage. They have also become indispensable ingredients in food and cosmetics. PSA-based hydrogels have been extensively studied in biomedical applications, showing optimal performance through different designs.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Review Biotechnology & Applied Microbiology

Polylysine for skin regeneration: A review of recent advances and future perspectives

Payam Zarrintaj et al.

Summary: Polylysine, a promising biomaterial for skin regeneration, has exceptional abilities as tissue engineering scaffolds, drug carriers, and gene delivery vectors, as well as playing a preservative role in extending the lifetime of skin tissue. Research on polylysine is growing and expanding the potential of these biomaterials from traditional treatments to a new era of tissue regeneration.

BIOENGINEERING & TRANSLATIONAL MEDICINE (2022)

Add to Collection

Article Robotics

Highly Stretchable Flame-Retardant Skin for Soft Robotics with Hydrogel-Montmorillonite-Based Translucent Matrix

Hritwick Banerjee et al.

Summary: Flame-retardant coatings are essential for intelligent systems operating in high-temperature environments, requiring flexible and resilient skins for various tasks. A study has successfully developed fire-resistant robotic mechanisms with montmorillonite-biocompatible hydrogel skin, providing effective flame retardancy and high post-fire stretchability.

SOFT ROBOTICS (2022)

Add to Collection

Review Engineering, Multidisciplinary

Fire-retarded nanocomposite aerogels for multifunctional applications: A review

Wen-Jie Yang et al.

Summary: Based on the different dimensions of nanomaterials, this review summarizes the recent progress in multifunctional nanocomposite aerogels. The preparation methods and performance evaluation of common types of aerogels are detailed. Moreover, the investigation and prospects of multifunctional aerogels are demonstrated and discussed in depth.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Flame Retardant Cellulose-Based Hybrid Hydrogels for Firefighting and Fire Prevention

Hafezeh Nabipour et al.

Summary: This study presents an environmentally friendly, non-toxic, and biodegradable cellulose-based hybrid hydrogel for the fire prevention and firefighting of wildfires. The experiments show that this hydrogel exhibits superior performance in preventing and extinguishing fires.

FIRE TECHNOLOGY (2022)

Add to Collection

Review Materials Science, Biomaterials

Polydopamine Biomaterials for Skin Regeneration

Mohsen Khodadadi Yazdi et al.

Summary: Designing biomaterials that mimic wound healing and skin regeneration has gained attention recently. Some biopolymers behave similarly to the extracellular matrix (ECM), supporting adhesion and cellular interactions. Polydopamine (PDA) is a natural bioadhesive and bioactive polymer with high chemical versatility, making it an exciting candidate for various biomedical applications. PDA-based biomaterials have near-infrared (NIR) absorption, excellent cell affinity, and can regulate cell behavior through signal transduction pathways.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Bioinspired mineralized wood hydrogel composites with flame retardant properties

Hang Li et al.

Summary: In this study, mineralised wood-hydrogel composites with efficient flame retardant properties were prepared by impregnating delignified wood with biocompatible and mineral-inducing gelatine hydrogels, followed by in situ mineralisation of silica on the hydrogel and wood pores via the sol-gel method.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Applied

Flame-retarded rigid polyurethane foam conferred by an amino trimethylphosphonate iron and expandable graphite compound flame retardant

Xu Zhang et al.

Summary: In this study, flame-retarded rigid polyurethane foam (RPUF) was successfully fabricated through a one-step all-water foaming method. The RPUF was modified with an amino trimethylphosphonate iron (Fe2+-ATMP) and expandable graphite (EG) compound flame retardant, which significantly improved its flame retardancy, smoke suppression, and thermal stability.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Applied

Effect of environment-friendly intercalated Coal and coal gangue on flame-retardant, antistatic, and mechanical properties of poly(vinyl chloride)/acrylonitrile-styrene-acrylate composites

Fuqin Xu et al.

Summary: Coal-based environment-friendly PVC/ASA flame-retardant and antistatic composites were prepared, and their properties were tested. The results showed that the addition of alkaline calcium-based coal gangue thermal stabilizer and intercalation modified coal improved the flame-retardant and antistatic properties of the material.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

Add to Collection

Review Polymer Science

Clickable polysaccharides for biomedical applications: A comprehensive review

Mohsen Khodadadi Yazdi et al.

Summary: Recent advances in materials science and engineering have emphasized the importance of sophisticated biomaterials with tunable properties for emerging biomedical applications. Click chemistry, with its ability to perform specific and controllable bioorthogonal reactions, has revolutionized the design of complex molecular structures. The introduction of clickable groups into biomolecules has shown potential in medicinal chemistry and healthcare solutions. This review explores the key aspects and applications of clickable polysaccharides (PSA) in the design of advanced polymeric biomaterials for molecular imaging, drug delivery, and tissue engineering, highlighting their versatility and future perspectives.

PROGRESS IN POLYMER SCIENCE (2022)

Add to Collection

Review Biotechnology & Applied Microbiology

Mussel-inspired biomaterials: From chemistry to clinic

Ali Taghizadeh et al.

Summary: After billions of years, nature still serves as inspiration for developing new technologies and materials. Wet and strong adhesion by Mytilidae mussels has inspired the development of advanced adhesives for moist conditions. A deep understanding of the chemical moieties and microenvironmental conditions involved in wet adhesion is essential for optimal design. Muscle-inspired chemistry has versatile applications in various fields, particularly in bioengineering.

BIOENGINEERING & TRANSLATIONAL MEDICINE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Double-safety flexible supercapacitor basing on zwitterionic hydrogel: over-heat alarm and flame-retardant electrolyte

Zhongli Yang et al.

Summary: This research reports a thermoresponsive zwitterionic conductive natural polymer based hydrogel as the electrolyte for a safe flexible supercapacitor. The hydrogel exhibits good flexibility and conductivity, and the assembled supercapacitor shows excellent electrochemical performance with wide working voltage ranges and high energy density. The thermoresponsive conductivity of the hydrogel can be used to warn of sudden temperature increases, and the hydrogel also has flame retardant properties.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Preparation of a self-adhesive hydrogel and research on its flame-retardant properties

Mengli Shi et al.

Summary: This study proposes a new type of fire-extinguishing self-adhesive hydrogel, polyacrylic acid-sodium alginate-tannic acid (PAA-SA-TA), to prevent the spontaneous combustion of coal and improve the utilization rate of hydrogels. The results showed that PAA-SA-TA hydrogel had higher air-leakage blocking efficiency and inhibition rate compared to traditional hydrogels. In addition, it evenly covered the burning coal body, extinguished the fire, and prevented re-ignition.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

A high-thermopower ionic hydrogel for intelligent fire protection

Changcheng Jiang et al.

Summary: This study successfully prepared a multifunctional flame-retardant ionic hydrogel (HTIG) with high fire safety and sensitive temperature response, exhibiting high thermopower, sensitive fire warning and strain sensing, excellent flame retardancy, and self-adhesive performance. The HTIG could trigger fire alarms quickly, self-extinguish during fire, and significantly increase the limiting oxygen index (LOI) of wood, providing new insights for the development of intelligent fireproof materials.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Review Chemistry, Physical

Polysaccharide-based nanocomposites for biomedical applications: a critical review

Hanieh Shokrani et al.

Summary: This article provides a critical review of the application of nanocomposite polysaccharides (NPSA) in the field of medicine, including their use as drug and gene delivery systems, antibacterial platforms, and hemostasis agents, as well as in tissue engineering and cancer diagnosis and treatment. The potential applications of NPSA in bioimaging and biosensing are also discussed. The toxicity mechanisms of nanoparticles used in NPSA fabrication are compared to shed light on future challenges in NPSA development.

NANOSCALE HORIZONS (2022)

Add to Collection

Article Food Science & Technology

Synthesis and Characterization of Superabsorbent Cellulose-Based Hydrogel for Agriculture Application

Dipankar Das et al.

Summary: This study focuses on the synthesis and characterization of carboxymethylcellulose sodium salt (CMCNa) and hydroxyethyl cellulose (HEC)-based biodegradable hydrogels using citric acid (CA) as a crosslinker, with cellulose nanocrystals (CNCs) incorporated into the hydrogel matrix. Results show that using CNCs as reinforcing agents decreases the tensile strength of hydrogels.

STARCH-STARKE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Basalt/Polyacrylamide-Ammonium Polyphosphate Hydrogel Composites for Fire-Resistant Materials

Wen Jiang Zheng et al.

Summary: It is found that adding fire-retarding ammonium polyphosphate and basalt fibers to hydrogels can improve fire resistance by preventing gel combustion and forming a protective layer. This high mechanical strength composite material can withstand high temperatures for up to 15 minutes.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A hybrid hydrogel/textile composite as flame-resistant dress

Yuanling Nie et al.

Summary: This study developed a simple casting strategy to prepare flame-resistant gel/textiles. Active diffusion of aqueous AAM/SiO2 pre-gel solution into the textile structure enabled the formation of tough interfacial adhesion, suppressing burning in high temperature environments.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review

Sandeep Ahankari et al.

Summary: Naturally derived nanocellulose (NC) is a renewable and biodegradable nanomaterial with high strength, low density, and tunable surface chemistry, allowing controlled interactions with other polymers and nanomaterials. NC aerogels have gained attention due to environmental concerns, and recent developments have focused on their applications in thermal fields such as electronics, apparel, and smart building materials with properties categorized as thermally insulated, thermally conductive, and flame-retardant.

ACS NANO (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Zwitterionic Hydrogel with High Transparency, Ultrastretchability, and Remarkable Freezing Resistance for Wearable Strain Sensors

Qin Jiao et al.

Summary: This study presents the development of an ultrastretchable, highly transparent, and antifreezing zwitterionic-based electronic sensor that can maintain its toughness and transparency down to -40 degrees C. The zwitterionic hydrogel exhibits good biocompatibility and protein adsorption resistance. Such zwitterionic hydrogel-based strain sensors could be highly valuable for wearable electronic devices, especially in extreme environment applications.

BIOMACROMOLECULES (2021)

Add to Collection

Article Chemistry, Applied

Flame-retardant PNIPAAm/sodium alginate/polyvinyl alcohol hydrogels used for fire-fighting application: Preparation and characteristic evaluations

Zhicai Yu et al.

Summary: A novel fire-preventing TN hydrogel was prepared and laminated on cotton fabric to enhance fire resistance. The TN hydrogel exhibited excellent swelling ratio, swelling-deswelling behavior, and antibacterial property, with optimal thermal stability observed at a specific ratio. Hydrogel-cotton fabric laminates showed efficient flame retardancy, attributed to energy absorption from water heating and evaporation in the hydrogel, suggesting potential for fire-protective clothing.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Chemistry, Applied

Influence of phytic acid on flame retardancy and adhesion performance enhancement of poly (vinyl alcohol) hydrogel coating to wood substrate

Xiaojiong Zhao et al.

Summary: The article presents an environmentally friendly PVA/PA hydrogel coating method to enhance the flame retardancy of wood by freeze-thaw cycles, showing better adhesion and fire-retardant properties compared to pure PVA hydrogel coating. This coating is suitable for a wide range of applications in the construction and furniture industries.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection

Review Polymer Science

Electrospinning for developing flame retardant polymer materials: Current status and future perspectives

Henri Vahabi et al.

Summary: Polymer processing techniques have developed rapidly to meet diverse applications, with electrospinning being a common method for fabricating continuous fibers with special advantages. Flame retardancy is an important performance characteristic of polymer materials, but both material and fabrication aspects need to be considered in design. This review categorizes state-of-the-art features of flame-retardant polymer materials developed using electrospinning, discussing mechanical properties, advantages, and challenges of natural and synthetic polymer fibers.

POLYMER (2021)

Add to Collection

Article Polymer Science

Hydrogels containing modified ammonium polyphosphate for fireproof materials

Qian Chen et al.

Summary: The study modified the widely used intumescent flame-retardant ammonium polyphosphate with carbon-carbon double bonds, and introduced it into hydrogels, improving their thermal stability and fire resistance. The resulting hydrogels showed enhanced mechanical strength, healing efficiency, and fireproof time compared to pure hydrogels.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Flame retardant polymer materials: An update and the future for 3D printing developments

Henri Vahabi et al.

Summary: This review paper focuses on recent developments in flame retardant polymer materials, with a particular emphasis on qualitative and quantitative analyses of their flame retardant properties. It also highlights advancements in designing precise structures through innovative technologies and the flame retardancy performances of 3D printing. The strategies driving innovative flame retardant polymer materials and 3D printing technology are approaching a practical juncture in the near future.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)

Add to Collection

Article Cell & Tissue Engineering

Injectable Cell-Laden Hydrogels for Tissue Engineering: Recent Advances and Future Opportunities

Payam Zarrintaj et al.

Summary: Tissue engineering aims to create functional tissues/organs for regenerating injured parts by utilizing cells and scaffolds. Hydrogel, as an important type of scaffold, plays a crucial role in cellular behaviors and tissue repair. Cell-laden injectable hydrogels have great potential in minimally invasive treatment for tissue regeneration.

TISSUE ENGINEERING PART A (2021)

Add to Collection

Article Materials Science, Paper & Wood

A novel flame-retardant composite material based on calcium alginate/poly (vinyl alcohol)/graphite hydrogel: thermal kinetics, combustion behavior and thermal insulation performance

Jinru Liu et al.

Summary: This study developed a novel fire-resistant composite hydrogel material with improved flame retardancy and extended burn time, demonstrating effective fire protection potential for firefighters.

CELLULOSE (2021)

Add to Collection

Article Chemistry, Physical

Green, tough and highly efficient flame-retardant rigid polyurethane foam enabled by double network hydrogel coatings

Yubin Huang et al.

Summary: The novel double network hydrogel coating greatly enhances the flame retardancy of RPUF, providing a new direction for the development of green and safe structural materials.

SOFT MATTER (2021)

Add to Collection

Article Polymer Science

Enhancing flame retardance of epoxy resin by incorporation into ammonium polyphosphate/boron nitride nanosheets/zinc ferrite three-dimensional porous aerogel via vacuum-assisted infiltration

Qiaoran Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Materials Science, Paper & Wood

Highly flame retardant zeolitic imidazole framework-8@cellulose composite aerogels as absorption materials for organic pollutants

Hafezeh Nabipour et al.

CELLULOSE (2020)

Add to Collection

Article Energy & Fuels

A novel high-toughness, organic/inorganic double-network fire-retardant gel for coal-seam with high ground temperature

Yongsheng Li et al.

FUEL (2020)

Add to Collection

Review Engineering, Biomedical

Poloxamer: A versatile tri-block copolymer for biomedical applications

Payam Zarrintaj et al.

ACTA BIOMATERIALIA (2020)

Add to Collection

Article Materials Science, Paper & Wood

Preparation and characterisation of fire-resistant PNIPAAm/SA/AgNP thermosensitive network hydrogels and laminated cotton fabric used in firefighter protective clothing

Zhicai Yu et al.

CELLULOSE (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Succinoglycan dialdehyde-reinforced gelatin hydrogels with toughness and thermal stability

Seonmok Kim et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Review Chemistry, Physical

Conductive polymers in water treatment: A review

Ali Taghizadeh et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Review Polymer Science

Flame Retardancy of Bio-Based Polyurethanes: Opportunities and Challenges

Henri Vahabi et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Self-healing Polyol/Borax Hydrogels: Fabrications, Properties and Applications

Farzad Seidi et al.

CHEMICAL RECORD (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Hydrogel adsorbent in industrial wastewater treatment and ecological environment protection

Ruihua Mu et al.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2020)

Add to Collection

Review Engineering, Chemical

New hydrogel materials for improving solar water evaporation, desalination and wastewater treatment: A review

Swellam W. Sharshir et al.

DESALINATION (2020)

Add to Collection

Article Polymer Science

A Novel Hydrogel Based on Renewable Materials for Agricultural Application

Silvie Durpekova et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Agarose-based biomaterials for advanced drug delivery

Mohsen Khodadadi Yazdi et al.

JOURNAL OF CONTROLLED RELEASE (2020)

Add to Collection

Review Materials Science, Biomaterials

Hydrogel membranes: A review

Mohsen Khodadadi Yazdi et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Polymer Science

3D printed sandwich materials filled with hydrogels for extremely low heat release rate

Laura Geoffroy et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Materials Science, Biomaterials

Mesenchymal Stem Cell Spheroids Embedded in an Injectable Thermosensitive Hydrogel: An In Situ Drug Formation Platform for Accelerated Wound Healing

Mohammad Ali Nilforoushzadeh et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Combining Low-Emissivity Thin Coating and 3D-Printed Original Designs for Superior Fire-Protective Performance

Laura Geoffroy et al.

ACS OMEGA (2020)

Add to Collection

Article Chemistry, Physical

Poorly-crystallized poly(vinyl alcohol)/carrageenan matrix: Highly ionic conductive and flame-retardant gel polymer electrolytes for safe and flexible solid-state supercapacitors

Tingting Ye et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Polymer Science

Biodegradable poly(lactic acid)/cellulose-based superabsorbent hydrogel composite material as water and fertilizer reservoir in agricultural applications

Paola Calcagnile et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection

Review Polymer Science

Thermo-sensitive polymers in medicine: A review

Payam Zarrintaj et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Review Biochemistry & Molecular Biology

Lignin-based hydrogels: A review of preparation, properties, and application

Yi Meng et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Chemistry, Applied

Quantifying the effects of basalt fibers on thermal degradation and fire performance of epoxy-based intumescent coating for fire protection of steel substrate

Muhammad Yasir et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Article Chemistry, Applied

Electroactive bio-epoxy incorporated chitosan-oligoaniline as an advanced hydrogel coating for neural interfaces

Saeed Manouchehri et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Article Chemistry, Physical

Swelling Behavior of Polyacrylamide-Cellulose Nanocrystal Hydrogels: Swelling Kinetics, Temperature, and pH Effects

Tippabattini Jayaramudu et al.

MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh-Temperature Insulating and Fire-Resistant Aerogels from Cationic Amylopectin and Clay via a Facile Route

Dan-Dan Ye et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Applied

Highly efficient flame-retardant and low-smoke-toxicity poly(vinyl alcohol)/alginate/ montmorillonite composite aerogels by two-step crosslinking strategy

Ningjing Wu et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Chemistry, Applied

Conductive hydrogels based on agarose/alginate/chitosan for neural disorder therapy

Rafieh Alizadeh et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Review Engineering, Biomedical

Overview of natural hydrogels for regenerative medicine applications

Marta Calvo Catoira et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)

Add to Collection

Review Biochemistry & Molecular Biology

Flame Retardant Epoxy Composites on the Road of Innovation: An Analysis with Flame Retardancy Index for Future Development

Elnaz Movahedifar et al.

MOLECULES (2019)

Add to Collection

Article Biophysics

Self-gelling electroactive hydrogels based on chitosan-aniline oligomers/agarose for neural tissue engineering with on-demand drug release

Babak Bagheri et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

Add to Collection

Review Materials Science, Composites

A review on nanocomposite hydrogels and their biomedical applications

Shirin Rafieian et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Polymer Science

Water-retaining, tough and self-healing hydrogels and their uses as fire-resistant materials

Xiao Feng Cui et al.

POLYMER CHEMISTRY (2019)

Add to Collection

Review Polymer Science

Slow release fertilizer hydrogels: a review

Ros Azlinawati Ramli

POLYMER CHEMISTRY (2019)

Add to Collection

Review Environmental Sciences

Hydrogel applications for adsorption of contaminants in water and wastewater treatment

Vinh Van Tran et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Add to Collection

Article Engineering, Chemical

Development of a novel bentonite-acrylamide superabsorbent hydrogel for extinguishing gangue fire hazard

Yibo Tang et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Applied

Effect of basalt fibers dispersion on steel fire protection performance of epoxy-based intumescent coatings

Muhammad Yasir et al.

PROGRESS IN ORGANIC COATINGS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Eco-friendly Flame-Retardant Cellulose Nanofibril Aerogels by Incorporating Sodium Bicarbonate

Muhammad Farooq et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Conventional chemical precipitation route to anchoring Ni(OH)2 for improving flame retardancy of PVA

P. E. Lokhande et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Ionically Crosslinked Thermoresponsive Chitosan Hydrogels formed In Situ: A Conceptual Basis for Deeper Understanding

Maryam Rahmati et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

Add to Collection

Article Polymer Science

Robust and fire retardant borate-crosslinked poly (vinyl alcohol)/montmorillonite aerogel via melt-crosslink

Ke Shang et al.

POLYMER (2017)

Add to Collection

Article Chemistry, Applied

Transparent nanocomposite coatings based on epoxy and layered double hydroxide: Nonisothermal cure kinetics and viscoelastic behavior assessments

Hadi Rastin et al.

PROGRESS IN ORGANIC COATINGS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Cast-in-place, ambiently-dried, silica-based, high-temperature insulation

Eric Jianfeng Cheng et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Nonflammable Alginate Nanocomposite Aerogels Prepared by a Simple Freeze-Drying and Post-Cross-Linking Method

Ke Shang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Fire-Resistant Hydrogel-Fabric Laminates: A Simple Concept That May Save Lives

Widusha R. K. Illeperuma et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Elaboration of light composite materials based on alginate and algal biomass for flame retardancy: preliminary tests

Olivia Gady et al.

JOURNAL OF MATERIALS SCIENCE (2016)

Add to Collection

Article Engineering, Chemical

Preparation of Starch-Based Bionanocomposite Hydrogel with Mica for Fire Retardancy

Bipra Narayan Mallick et al.

ADVANCES IN POLYMER TECHNOLOGY (2015)

Add to Collection

Article Polymer Science

Synthesis and characterization of temperature-sensitive hydrogels

Xiangming Hu et al.

E-POLYMERS (2015)

Add to Collection

Review Materials Science, Biomaterials

Classification, processing and application of hydrogels: A review

Faheem Ullah et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Flame Retardant, Heat Insulating Cellulose Aerogels from Waste Cotton Fabrics by in Situ Formation of Magnesium Hydroxide Nanoparticles in Cellulose Gel Nanostructures

Yangyang Han et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)

Add to Collection

Review Multidisciplinary Sciences

Hydrogel: Preparation, characterization, and applications: A review

Enas M. Ahmed

JOURNAL OF ADVANCED RESEARCH (2015)

Add to Collection

Review Polymer Science

Effects of ageing on the fire behaviour of flame-retarded polymers: a review

Henri Vahabi et al.

POLYMER INTERNATIONAL (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Preparation and Flammability of Poly(vinyl alcohol) Composite Aerogels

Hong-Bing Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Hydrogels in a historical perspective: From simple networks to smart materials

Sytze J. Buwalda et al.

JOURNAL OF CONTROLLED RELEASE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Polymer/clay aerogel composites with flame retardant agents: Mechanical, thermal and fire behavior

Liang Wang et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Materials Science, Ceramics

Aerogel-based thermal superinsulation: an overview

Matthias Koebel et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Review Construction & Building Technology

Aerogel insulation for building applications: A state-of-the-art review

Ruben Baetens et al.

ENERGY AND BUILDINGS (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Hydrogels in Regenerative Medicine

Brandon V. Slaughter et al.

ADVANCED MATERIALS (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Self-assembled and nanostructured hydrogels for drug delivery and tissue engineering

Hyun Jung Chung et al.

NANO TODAY (2009)

Add to Collection

Review Polymer Science

Hydrogels in drug delivery: Progress and challenges

Todd R. Hoare et al.

POLYMER (2008)

Add to Collection

Article Chemistry, Applied

Study on superabsorbent composite. VI. Preparation, characterization and swelling behaviors of starch phosphate-graft-acrylamide/attapulgite superabsorbent composite

Junping Zhang et al.

CARBOHYDRATE POLYMERS (2006)

Add to Collection

Article Environmental Sciences

Comparison of various advanced oxidation processes and chemical treatment methods for COD and color removal from a polyester and acetate fiber dyeing effluent

N Azbar et al.

CHEMOSPHERE (2004)

Add to Collection

Review Chemistry, Multidisciplinary

Chemistry of aerogels and their applications

AC Pierre et al.

CHEMICAL REVIEWS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.