☆ 4.7 Article

MXene-wrapped zinc hydroxystannate nanocubes toward reducing the heat, smoke and toxicity hazards of ABS resin

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Evaluation of smoke gas toxicity and smoke density of bus interior materials

Anna Sandinge et al.

Summary: Materials used for interior parts in buses are evaluated for fire properties and smoke production. While the materials met the requirements for fire classification, they produced dark smoke and melting burning pieces. The high smoke production would reduce visibility and hinder safe evacuation of passengers in case of a fire. Additionally, toxic gases were detected in the smoke.

FIRE AND MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Hollow LDH cage covering with ultra-thin MXenes veil: Integrated micro-nano structure upon heat release suppression and toxic effluents elimination for polymer

Haobo Zhou et al.

Summary: In this study, a strongly-coupled micro-nano structure based on hollow LDH with ultra-thin MXenes veil (MX@H-LDH) was designed via assembly strategy. Loading 5.0 wt% MX@H-LDH reduced peak heat release rate, total heat release, peak CO production rate and total CO production by 54.6%, 37.5%, 47.4%, and 63.6% respectively. The mechanical interlocking action of MX@H-LDH strengthened the mechanical capability and the curbed toxic gas releases were observed. This work is instructive for the design of novel MXenes-based nanostructures in polymer composites with high performance.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in MXene-Based Aerogels: Fabrication, Performance and Application

Chunxiang Wei et al.

Summary: MXene-based aerogels, as one of the miracle materials in the 21st century, have attracted substantial research interests due to their ultra-low weight, remarkable mechanical performance, and incredible immunity to harsh working environments. This review provides a comprehensive overview of the recent advances in the fabrication, performance, and application of MXene-based aerogels, including the strategies for constructing them and their desirable properties in various areas such as electromagnetic management, sensors, solar steam generators, and energy storage. The structure-property relationships are investigated and compared, and future development and challenges are discussed, bringing new research opportunities for material engineering and functional application of MXene-based aerogels.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Mechanically flexible and flame retardant polyphenol-bridged casein/MXene composite for fire proofing repeatable contact/non-contact fire monitoring

Yanyun Mao et al.

Summary: In this study, a biobased, durable, reusable, and highly sensitive fire warning composite was developed. It exhibits excellent thermal stability and fire safety, and can provide reliable warning responses under both direct flame attack and non-contact fire threat. It also has attractive flame position detection capability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Ecology

Fire Egress System Optimization of High-Rise Teaching Building Based on Simulation and Machine Learning

Muchen Zhou et al.

Summary: A fire egress system is crucial for emergency evacuation, particularly in high-rise teaching buildings. However, the existing design lacks holistic optimization strategies. This study investigated the co-effectiveness of stairwells, walkways, and room doors using simulation and machine learning. The results showed that the geometric features of the evacuation stairwell are key in optimizing the egress system.

FIRE-SWITZERLAND (2023)

Add to Collection

Article Engineering, Environmental

Synthesis of vanillin-based porphyrin for remarkably enhancing the toughness, UV-resistance and self-extinguishing properties of polylactic acid

Wenjie Yang et al.

Summary: A vanillin-based porphyrin (VPR) was synthesized and added to polylactic acid (PLA) to enhance its mechanical, anti-UV, and flame retardant properties. The PLA/VPR biocomposites showed significant toughening effect due to the intermolecular interactions between VPR and PLA. With only 3 wt% VPR loading, the PLA/3VPR composite achieved excellent self-extinguishing with a UL-94 V-0 level.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Designing advanced OD-2D hierarchical structure for Epoxy resin to accomplish exceeding thermal management and safety

Jingyi Lu et al.

Summary: In this study, ZHS nanocubes were in-situ fabricated on Ti3C2Tx nanosheets to improve the thermal management capacity and fire safety of EP. The OD-2D hierarchical structure of ZHS@M enhanced the safety of EP by reducing heat release rate and hazardous gases during combustion, while also improving tensile robustness for electronics in thermal management field. This hierarchical EP-ZHS@M composites provide significant benefits in cleaning thermal accumulation, increasing fire safety, and preventing thermal disaster chain formation in modern electronic devices.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Leaf vein-inspired engineering of MXene@SrSn(OH)6 nanorods towards super-tough elastomer nanocomposites with outstanding fire safety

Jingyi Lu et al.

Summary: The study enhanced the tensile robustness and fire safety of TPU by incorporating SSO nanorods on MXene nanosheets, leading to improved mechanical properties and decreased heat release rate during combustion. The biomimetic leaf vein-inspired structure of TPU-MSSO nanocomposites not only exhibited superior toughness, but also enhanced fire safety, contributing to the prevention of thermal disaster chain formation and enabling further applications in portable devices and flexible electronics packaging.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Engineering highly graphitic carbon quantum dots by catalytic dehydrogenation and carbonization of Ti3C2Tx-MXene wrapped polystyrene spheres

Hao-Ran Chen et al.

Summary: The catalytic dehydrogenation and carbonization of polystyrene by Ti3C2Tx-MXene nanosheets have been successfully achieved to synthesize highly graphitic carbon quantum dots (CQDs). The Ti3C2Tx-MXene shell acts as a barrier and catalytically active site, retaining the degradation products and promoting their diffusion into MXene interlayers. The resulting CQDs exhibit excellent photoluminescence behavior. This work provides a facile strategy to develop the catalytic carbonization mechanism of MXene/polymer nanocomposites.

CARBON (2022)

Add to Collection

Article Engineering, Environmental

MOFs-derived self-sacrificing template strategy to double-shelled metal oxides nanocages as hierarchical interfacial catalyst for suppressing smoke and toxic gases releases of epoxy resin

Junling Wang et al.

Summary: The use of metal oxides double-shelled nanocages derived from metal organic frameworks (MOFs) has been shown to effectively suppress the emission of smoke and toxic gases from epoxy resin. In addition, the nanocages also improve the mechanical performance of the material.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Manufacturing

Facile strategy to synthesize MXene@LDH nanohybrids for boosting the flame retardancy and smoke suppression properties of epoxy

Keqing Zhou et al.

Summary: This study developed a simple strategy to synthesize MXene@LDH nanohybrids for constructing efficient flame retardant systems in polymer composites. The results showed that MXene@LDH improved the flame retardancy and smoke suppression performance of the composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Boosting fire safety and mechanical performance of thermoplastic polyurethane by the face-to-face two-dimensional phosphorene/MXene architecture

Yong Luo et al.

Summary: In this study, black phosphorus was modified with MXene and polydopamine to improve its structural stability and dispersibility in the matrix. The resulting BP-MXene@PDA nanohybrid was found to enhance the mechanical performance, thermal stability, and flame retardancy of thermoplastic polyurethane elastomer.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Structural integrity assessment of additively manufactured ABS, PLA and graphene reinforced PLA notched specimens combining Failure Assessment Diagrams and the Theory of Critical Distances

S. Cicero et al.

Summary: Failure Assessment Diagrams (FADs) are widely used for analyzing structural components with cracks, but their application in materials other than metals requires further theoretical support and experimental validation. This study investigates the use of FAD for additively manufactured materials with notches, and shows that it can provide accurate estimations of fracture loads as long as linear-elastic fracture toughness values are used.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Add to Collection

Article Engineering, Manufacturing

Interface assembly of flower-like Ni-MOF functional MXene towards the fire safety of thermoplastic polyurethanes

Mei Wan et al.

Summary: This study successfully fabricated three-dimensional flower-like Ni-MOFs and functionalized MXene for use in thermoplastic polyurethanes, improving flame retardancy and smoke suppression properties.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

BODIPY coated on MXene nanosheets for improving mechanical and fire safety properties of ABS resin

San-E Zhu et al.

Summary: By incorporating BODIPY-modified MXene nanosheets as a flame retardant, the study successfully improved the mechanical properties and flame retardancy of ABS.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability

Bin Yu et al.

Summary: A facile strategy was reported for surface manipulation of Ti3C2Tx with AP-POSS, resulting in POSS-Ti3C2Tx that showed significantly improved thermal and flame retardant properties when incorporated into PS nanocomposites. The outstanding fire safety was attributed to the combination of adsorption, catalytic and barrier effects of POSS-Ti3C2Tx, making it attractive for wide potential applications.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Synthesis of zinc hydroxystannate/reduced graphene oxide composites using chitosan to improve poly(vinyl chloride) performance

Zhiyong Huo et al.

Summary: A novel flame retardant was synthesized by using chitosan-modified zinc hydroxystannate and reduced graphene oxide to enhance the performance of flexible poly(vinyl chloride). The results showed that this flame retardant could effectively reduce the heat release and smoke emission of PVC composites.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Environmental

Heterogeneous crystallization of zinc hydroxystannate on galvanized steel for enhancing the bond strength at the rebar/concrete interface

Francesco Di Franco et al.

Summary: Zinc hydroxystannate (ZnSn(OH)(6)) coatings were successfully deposited on galvanized carbon steel samples by an electroless heterogeneous crystallization process. The coatings exhibited good cathodic protection in a simulated concrete pore solution and improved corrosion resistance of the rebars. Pull-out tests showed enhanced bond strength at the rebar/concrete interface after the heterogeneous crystallization process.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Enhance the interaction between ammonium polyphosphate and epoxy resin matrix through hydrophobic modification with cationic latex

Xiaoguo Zhang et al.

Summary: The study aimed to enhance the interaction between ammonium polyphosphate (APP) and epoxy resin (EP) matrix by preparing modified ammonium polyphosphate (MAPP) with hydrophobic property. The results showed improved hydrophobicity and thermal stability of MAPP over APP, leading to enhanced interfacial interaction between MAPP and EP matrix. Such improvement in interfacial interaction could assist in stress transfer and impact energy absorption.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Engineering, Environmental

MXene/chitosan nanocoating for flexible polyurethane foam towards remarkable fire hazards reductions

Bo Lin et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic Effect of Mesoporous Nanocomposites with Different Pore Sizes and Structures on Fire Safety and Smoke Suppression of Epoxy Resin

Xiu Wang et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

Add to Collection

Article Polymer Science

Preparation of Zinc Hydroxystannate Coated Dendritic-Fibrillar Barium Carbonate and its Flame Retardant Effect on Soft Poly (Vinyl Chloride)

Fu-ya Liu et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2020)

Add to Collection

Article Polymer Science

Nickel hydroxide and zinc hydroxystannate dual modified graphite carbon nitride for the flame retardancy and smoke suppression of epoxy resin

Wenzong Xu et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Confined Dispersion of Zinc Hydroxystannate Nanoparticles into Layered Bimetallic Hydroxide Nanocapsules and Its Application in Flame-Retardant Epoxy Nanocomposites

Zhida Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Realizing simultaneous improvements in mechanical strength, flame retardancy and smoke suppression of ABS nanocomposites from multifunctional graphene

Guobo Huang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Thermal, Mechanical, and dielectric properties of Injection Molded Graphene Nanocomposites Based on ABS/PC and ABS/PP Blends

Marianna I. Triantou et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Engineering, Environmental

New application for aromatic Schiff base: High efficient flame-retardant and anti-dripping action for polyesters

Jia-Ning Wu et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Polymer Science

Flame retardancy effect of combined ammonium polyphosphate and aluminium diethyl phosphinate in acrylonitrile-butadiene-styrene

Vera Realinho et al.

POLYMER DEGRADATION AND STABILITY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of Nitrogen-Doped Graphene Decorated with Organophosphor and Lanthanum toward High-Performance ABS Nanocomposites

Guobo Huang et al.

ACS APPLIED NANO MATERIALS (2018)

Add to Collection

Article Thermodynamics

Organic nanoparticles as promising flame retardant materials for thermoplastic polymers

Nour Fathi Attia

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Article Engineering, Environmental

Self-assembly of zinc hydroxystannate on amorphous hydrous TiO2 solid sphere for enhancing fire safety of epoxy resin

Wei Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Flame Retardancy and Mechanical Properties of a Novel Zinc Hydroxystannate/Epoxy Resin Nanocomposite

Tingting Gao et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2017)

Add to Collection

Article Engineering, Multidisciplinary

Numerical simulation of dormitory building fire and personnel escape based on Pyrosim and Pathfinder

Xinfeng Long et al.

JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Hybrids of Two-Dimensional Ti3C2 and TiO2 Exposing {001} Facets toward Enhanced Photocatalytic Activity

Chao Peng et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Functionalized Carbon Nanotubes with Phosphorus- and Nitrogen-Containing Agents: Effective Reinforcer for Thermal, Mechanical, and Flame-Retardant Properties of Polystyrene Nanocomposites

Weiyi Xing et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Engineering, Manufacturing

Enhanced flame-retardant property of epoxy composites filled with solvent-free and liquid-like graphene organic hybrid material decorated by zinc hydroxystannate boxes

Peipei Li et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Engineering, Environmental

The influence of zinc hydroxystannate on reducing toxic gases (CO, NOx and HCN) generation and fire hazards of thermoplastic polyurethane composites

Bibo Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Plating on acrylonitrile-butadiene-styrene (ABS) plastic: a review

Sharon Olivera et al.

JOURNAL OF MATERIALS SCIENCE (2016)

Add to Collection

Article Polymer Science

Phosphorylation of lignin to flame retard acrylonitrile butadiene styrene (ABS)

B. Prieur et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Article Polymer Science

Facile synthesis of graphene sheets decorated nanoparticles and flammability of their polymer nanocomposites

Nour F. Attia et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Article Polymer Science

Green synthesis of polymer nanofibers and their composites as flame-retardant materials for polymer nanocomposites

Nour F. Attia

POLYMERS FOR ADVANCED TECHNOLOGIES (2016)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced electrical conductivity and mechanical properties of ABS/EPDM composites filled with graphene

F. Wang et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Polymer Science

Flame retardancies of novel organo-phosphorus flame retardants based on DOPO derivatives when applied to ABS

DongQuy Hoang et al.

MACROMOLECULAR RESEARCH (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Novel synthesis of magnesium hydroxide nanoparticles modified with organic phosphate and their effect on the flammability of acrylonitrile-butadiene styrene nanocomposites

Nour F. Attia et al.

MATERIALS CHEMISTRY AND PHYSICS (2015)

Add to Collection

Article Polymer Science

Flame retardancy and synergistic flame retardant mechanisms of acrylonitrile-butadiene-styrene composites based on aluminum hypophosphite

Ningjing Wu et al.

POLYMER DEGRADATION AND STABILITY (2014)

Add to Collection

Article Polymer Science

Flame-retardant materials: synergistic effect of halloysite nanotubes on the flammability properties of acrylonitrile-butadiene-styrene composites

Nour F. Attia et al.

POLYMER INTERNATIONAL (2014)

Add to Collection

Article Materials Science, Composites

Mechanical and flame-retardant properties of styrene-ethylene-butylene-styrene/carbon nanotube composites containing bisphenol A bis(diphenyl phosphate)

Zhaofeng Wu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Polymer Science

Synergistic effects of expandable graphite and ammonium polyphosphate with a new carbon source derived from biomass in flame retardant ABS

Yan Zhang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Materials Science, Composites

Properties of flame-retardant fillers in polypropylene/ethylene propylene diene monomer composites

M. S. Hamzah et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2013)

Add to Collection

Article Polymer Science

Synergistic effect of ammonium polyphosphate and expandable graphite on flame-retardant properties of acrylonitrile-butadiene-styrene

Lan-Lan Ge et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Layered double hydroxides used as flame retardant for engineering plastic acrylonitrile-butadiene-styrene (ABS)

Sailong Xu et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2012)

Add to Collection

Article Polymer Science

Synergistic effect between a hyperbranched charring agent and ammonium polyphosphate on the intumescent flame retardance of acrylonitrile-butadiene-styrene polymer

Juan Li et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

Article Polymer Science

Effect of anionic organoclay with special aggregate structure on the flame retardancy of acrylonitrile-butadiene-styrene/clay composites

Xiaohua Do et al.

POLYMER DEGRADATION AND STABILITY (2010)

Add to Collection

Article Polymer Science

Triple shape memory effect in multiple crystalline polyurethanes

Shaojun Chen et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2010)

Add to Collection

Article Polymer Science

Flame-Retardant Properties of Magnesium Hydroxystannate and Strontium Hydroxystannate Coated Calcium Carbonate on Soft Poly(vinyl chloride)

Yunhong Jiao et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Functionalizing carbon nanotubes by grafting on intumescent flame retardant: Nanocomposite synthesis, morphology, rheology, and flammability

Hai-yun Ma et al.

ADVANCED FUNCTIONAL MATERIALS (2008)

Add to Collection

Review Polymer Science

New developments in flame retardancy of styrene thermoplastics and foams

Sergei V. Levchik et al.

POLYMER INTERNATIONAL (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.