☆ 4.7 Article

Hierarchical clinoptilolite zeolite-template carbon for highly selective separation of CO2 and CH4

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Microporous three dimensional ordered zeolite-templated carbon for efficient removal of VOCs: Experimental study and molecular dynamics simulation

Hantian Li et al.

Summary: Zeolite-templated carbon (ZTC), a three dimensional ordered carbon material, was synthesized and used as an efficient adsorbent for the removal of volatile organic compounds (VOCs). The ZTC sample prepared at 600 degrees C for 7 h exhibited the largest specific surface area and the best adsorption capacity for toluene, benzene, and m-xylene. The presence of O-2, SO2, and H2O influenced the adsorption capacity of VOCs, with O-2 initially promoting the removal ability and H2O having the most inhibitory effect.

FUEL (2023)

Add to Collection

Article Materials Science, Ceramics

Functionalized mesoporous SiO2-CaO-Na2O-P2O5 based nanometric glass-ceramic particles with enhanced dispersibility and bioactivity

Jaideep Adhikari et al.

Summary: In this study, bioactive glass-ceramic (BGC) particles were synthesized using an acid catalyzed sol-gel derived route (Acid-BGC) and a modified Stober process under basic conditions (Basic-BGC). Acid-BGC showed complete conversion to a glass-ceramic form, while Basic-BGC exhibited reduced crystalline conversion. CTAB concentration was found to affect particle size and mesoporous structure of Basic-BGC, with 6 mM CTAB being the optimal concentration. Functionalization of Basic-BGC with glutamic acid enhanced its antibacterial, antioxidant, and bioactive properties without compromising dispersion stability. These findings suggest potential applications of functionalized Basic-BGC in bioprinting and electrospinning.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Si/SiO2@Graphene Superstructures for High-Performance Lithium-Ion Batteries

Yiru Ma et al.

Summary: The Si/SiO2@graphene superstructure, fabricated through reducing silicalite-1 and depositing carbon layers, exhibits excellent structural stability and high ion/electron transport rate. The optimized anode delivers outstanding cycling life, rate capability, areal capacity, and mechanical stability. The full cell test using LiFePO4 as the cathode demonstrates a high capacity and the Si/SiO2@graphene superstructure effectively maintains the film in LIBs.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Large carbon dioxide adsorption in ZTC at medium pressure: Effects of surface functionalization

Alfonso Policicchio et al.

Summary: This study synthesized a new class of porous ordered carbon-based material called ZTC using 3-D zeolites as a template, and investigated its CO2 capture properties. The results showed that a suitable micropore size distribution and pore wall functionalization can maximize the reversible CO2 adsorption. Various characterization techniques were used to reveal the structural, chemical, and morphological features of the material, as well as its adsorption properties. This study provides important insights for the development of efficient CO2 capture materials.

CARBON (2023)

Add to Collection

Article Engineering, Chemical

Heterogeneous activation of persulfate by macroscopic nitrogen-doped graphene oxide cubes for the degradation of antibiotic contaminants in water

Rajan Arjan Kalyan Hirani et al.

Summary: In this study, three-dimensional nitrogen-doped graphene macrostructures (3D-NGMs) were synthesized and used for the activation of peroxydisulfate (PS) to degrade sulfamethoxazole (SMX). The nitrogen configuration in the sp2 hybridised carbon network of the catalytic cubes was found to play an important role in the advanced oxidation processes. The optimal N-loading in NGC3 cubes showed outstanding performance for SMX degradation, and a possible reaction mechanism was proposed based on comprehensive studies on radical generation.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Combined computational and experimental study about the incorporation of phosphorus into the structure of graphene oxide

Tainara L. G. Costa et al.

Summary: This work presents an easy method to synthesize phosphorus-graphene oxide hybrid materials by varying the amounts of H3PO4 and H2SO4 during the oxidation reaction of a graphitic precursor. The physical and chemical properties of the hybrids can be significantly adjusted by changing the acid amounts used. XPS, solid-state C-13 and P-31 NMR results confirm the presence of oxygen functional groups and the incorporation of phosphorus through phosphate-like linkages and C-O-P bonds. DFT calculations provide insights into the energetics and geometry of the interaction between phosphate groups and graphene-based models, in good agreement with the experimental NMR spectra.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

Add to Collection

Article Energy & Fuels

N/S co-doped microporous zeolite-templated carbon for efficient CO2 adsorption and separation

Weitao Cao et al.

Summary: Heteroatomic doping of zeolite-templated carbon (ZTC) with nitrogen and sulfur enhances CO2 adsorption capacity and selectivity. The CO2 adsorption of N and S-doped ZTC materials is significantly higher than that of undoped ZTC at 0 degrees C, reaching up to 9.32 mmol g(-1). The ZTC-NS shows the highest CO2 adsorption capacity among the doped materials, indicating a synergistic enhancement effect between sulfur and nitrogen doping. Theoretical calculations reveal that N and S co-doping changes the electrostatic surface potential and local electronic density of porous carbon materials, thereby enhancing CO2 adsorption.

JOURNAL OF THE ENERGY INSTITUTE (2023)

Add to Collection

Article Chemistry, Physical

The adsorption of cationic dye onto ACPMG@ZIF-8 core-shell, optimization using central composite response surface methodology (CCRSM)

Soheila Sharafinia et al.

Summary: The study aimed to find an effective adsorbent for the removal of cationic dyes like Safranin O, using ACPMG and ZIF-8 to form ACPMG@ZIF-8 core-shell. The adsorbents were characterized using various techniques, revealing essential changes in porosity after modification. Optimization of factors such as loading amount, initial dye concentration, contact time, and pH was conducted, achieving an equal adsorption capacity of 1250 mg/g. Adsorption followed Langmuir isotherm and quasi-second-order kinetic models, with the process being exothermic and spontaneous.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Template Removal and Surface Modification of an SSZ-13 Membrane with Heated Sodium Chloride for CO2/CH4 Gas Separation

He-Li Wang et al.

Summary: In this paper, the synthesized SSZ-13 zeolite membrane was treated with heated sodium chloride instead of calcination in air. The surface modification of the membrane by heated NaCl improved the gas separation selectivity.

ACS OMEGA (2022)

Add to Collection

Article Chemistry, Physical

Siliceous self-pillared pentasil (SPP) zeolite with incorporated phosphorus groups in catalytic formation of butadiene by dehydra-decyclization of tetrahydrofuran: Study of catalyst stability by NMR and REDOR analysis

Evelin Ruiz-Zamora et al.

Summary: This study investigates the use of phosphorus-incorporated SPP zeolite catalysts in the dehydra-decyclization of THF and identifies phosphate groups as the active sites. Nuclear magnetic resonance tests confirm the stability of these catalysts and the presence of phosphorus in different forms.

APPLIED CATALYSIS A-GENERAL (2022)

Add to Collection

Article Engineering, Chemical

Zeolite-X synthesized from halloysite nanotubes and its application in CO2 capture

Xinmei Lu et al.

Summary: In this study, zeolite-X with high crystallinity and a large specific surface area was synthesized by purifying, calcining, and hydrothermally synthesizing Halloysite nanotubes (HNTs). The synthesized zeolite-X exhibits good crystallinity, uniform particle size, and thermal stability similar to industrial zeolite. This method has potential applications in CO2 capture from flue gases.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Add to Collection

Article Materials Science, Paper & Wood

The capillary and porous structure of the protein-cellulose complexes of Arctic brown algae Laminaria digitata and Saccharina latissima

Konstantin G. Bogolitsyn et al.

Summary: Cellulosic sorbents from macrophytes have various potential uses due to their specific physicochemical, capillary, and porous properties. Protein-cellulose complexes in brown algae biomass, exhibiting capillary and porous structures, show promise in adsorbing organic toxicants.

CELLULOSE (2022)

Add to Collection

Article Chemistry, Applied

Synthesis of micro-mesoporous materials by pseudomorphic transformations

Shweta Sareen et al.

Summary: Porous silica materials with interconnected pore systems were obtained through a pseudomorphic transformation, preserving the particle morphology. The transformation changed the pore structures and introduced intricate pore networks.

JOURNAL OF POROUS MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Base-type nitrogen doping in zeolite-templated carbon for enhancement of carbon dioxide sorption

Su-Kyung Lee et al.

Summary: Nitrogen-doped microporous carbons with zeolite-like pore structure and high specific surface area were synthesized using a zeolite template method. The carbon product pyrolyzed at 600°C showed higher content of basic-type nitrogen atoms and exhibited excellent CO2 adsorption performance.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Article Engineering, Environmental

Anthracite coal-derived activated carbon as an effectiveness adsorbent for superior gas adsorption and CO2 / N2 and CO2 / CH4 selectivity: Experimental and DFT study

Hadi Hamyali et al.

Summary: In this study, anthracite coal derived activated carbon was synthesized and applied as an adsorbent for CO2, N-2, and CH4 uptake. The synthesized adsorbents exhibited a large surface area and excellent adsorption features, enhancing gas uptake capacity.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

The state of BEA zeolite supported nickel catalysts in CO2 methanation reaction

Wojciech Gac et al.

Summary: Two model nickel catalysts for CO2 methanation, NiHAlBEA and NiSiBEA, were prepared using unmodified and dealuminated BEA-type zeolite supports. NiSiBEA showed higher CO2 conversion and methane selectivity at low reaction temperatures, as well as improved resistance to sintering at high reaction temperatures. The dispersion of nickel and sintering resistance in NiSiBEA led to the delay of catalyst deactivation by H2S.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Geochemistry & Geophysics

Powder XRD Study of Changes of Cd2+ Modified Clinoptilolite at Different Stages of the Ion Exchange Process

Louiza Dimowa et al.

Summary: The exchange of cadmium ions on clinoptilolite was studied at different temperatures and durations, revealing that the distribution of chromium ions depends on temperature conditions. The efficiency of exchange showed significant differences at different temperatures.

MINERALS (2021)

Add to Collection

Article Engineering, Chemical

Nitrogen and sulfur co-doped porous carbons from polyacrylonitrile fibers for CO2 adsorption

Tingyan Lu et al.

Summary: This study synthesized N, S co-doped porous carbons with high CO2 uptake, excellent CO2 capture properties, and good recyclability and adsorption kinetics. These results suggest that these porous carbons are potential sorbents for CO2 capture.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Environmental Sciences

Synthesis of Zeolite-Templated Carbonaceous Materials Doped With Nitrogen for Carbon Dioxide Adsorption

Jair Rangel-Sequeda et al.

Summary: Carbonaceous materials were synthesized using natural zeolite as a hard template, varying the synthesis conditions to obtain materials with different properties for improved CO2 adsorption performance. Nitrogen-doped activated carbons showed significantly higher selectivity to CO2 compared to commercial activated carbon due to the higher density of basic species on the material surface.

WATER AIR AND SOIL POLLUTION (2021)

Add to Collection

Review Chemistry, Physical

Estimation of Number of Graphene Layers Using Different Methods: A Focused Review

Vineet Kumar et al.

Summary: Graphene, a two-dimensional nanosheet composed of carbon species, possesses extraordinary physicochemical properties and is widely used in electronics, medical, and photovoltaic systems. Determining the number of graphene layers and their stacking order is crucial, with TEM and Raman spectra being the most promising methods for characterization.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of hierarchical zeolite templated carbons

T. Aumond et al.

Summary: The achievement of hierarchical zeolite templated carbons (ZTCs) utilizing mesoporous zeolites as sacrificial scaffolds was reported. The obtained hierarchical ZTCs feature tailored microporosity and high mesoporosity, bridging the gap between classical ZTCs and CMK-like materials. The rearrangement of surfactant-templated mesoporosity during ZTC formation impacts the crystal size and lattice strain of the zeolite template, while the surfactant-templating of USY zeolite leads to the development of a secondary amorphous phase.

CARBON TRENDS (2021)

Add to Collection

Review Environmental Sciences

Lignocellulose-based adsorbents: A spotlight review of the effective parameters on carbon dioxide capture process

Zahra Rouzitalab et al.

CHEMOSPHERE (2020)

Add to Collection

Article Engineering, Chemical

Catalytic activity and stability of Cu modified ZSM-5 zeolite membrane catalysts prepared by metal-organic chemical vapor deposition for trichloroethylene oxidation

Yong Zhang et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Add to Collection

Article Engineering, Chemical

Preparation of biomass-derived porous carbons by a facile method and application to CO2 adsorption

Qian Li et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Add to Collection

Article Energy & Fuels

High performance novel nanoadsorbents derived-natural cellulose fibers for superior CO2 adsorption and CO2 / CH4 separation

Raziyeh Ahmadi et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

Add to Collection

Article Chemistry, Physical

Synergism between non-thermal plasma and photocatalysis: Implicationsin the post discharge of ozone at a pilot scale in a catalytic fixed-bed reactor

Wala Abou Saoud et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Engineering, Environmental

Novel asphaltene-derived nanoporous carbon with N-S-rich micro-mesoporous structure for superior gas adsorption: Experimental and DFT study

Neda Haj Mohammad Hossein Tehrani et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Multidisciplinary Sciences

Developing a new method for synthesizing amine functionalized g-C3N4 nanosheets for application as anti-corrosion nanofiller in epoxy coatings

Sepideh Pourhashem et al.

SN APPLIED SCIENCES (2019)

Add to Collection

Article Engineering, Environmental

Synthesis of a modified HF-free MIL-101(Cr) nanoadsorbent with enhanced H2S/CH4, CO2/CH4, and CO2/N2 selectivity

Masood Sheikh Alivand et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Zeolite-templated carbons - three-dimensional microporous graphene frameworks

H. Nishihara et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorption-desorption of CO2 on zeolite-Y-templated carbon at various temperatures

Triyanda Gunawan et al.

RSC ADVANCES (2018)

Add to Collection

Article Engineering, Environmental

Synthesis of N-doped nanoporous carbon from walnut shell for enhancing CO2 adsorption capacity and separation

Zahra Rouzitalab et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly microporous activated carbons from biomass for CO2 capture and effective micropores at different conditions

Jaroslaw Serafin et al.

JOURNAL OF CO2 UTILIZATION (2017)

Add to Collection

Article Engineering, Chemical

Enhanced CO2 Capture Performance of Limestone by Industrial Waste Sludge

Ying-chao Hu et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Templating of carbon in zeolites under pressure: synthesis of pelletized zeolite templated carbons with improved porosity and packing density for superior gas (CO2 and H-2) uptake properties

Norah Balahmar et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions

Elisa M. Calvo-Munoz et al.

FRONTIERS IN MATERIALS (2016)

Add to Collection

Article Energy & Fuels

Performance evaluation of clinoptilolite and 13X zeolites in CO2 separation from CO2/CH4 mixture

A. Arefi Pour et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)

Add to Collection

Article Engineering, Environmental

Adsorption separation of CO2/CH4 gas mixture on the commercial zeolites at atmospheric pressure

Yundong Li et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Add to Collection

Article Engineering, Chemical

Development of T type zeolite for separation of CO2 from CH4 in adsorption processes

Mina Doroudian Rad et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)

Add to Collection

Article Chemistry, Physical

Significantly Increased CO2 Adsorption Performance of Nanostructured Templated Carbon by Tuning Surface Area and Nitrogen Doping

Lifeng Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Add to Collection

Article Engineering, Chemical

Fixed bed adsorption for the removal of carbon dioxide from nitrogen: Breakthrough behaviour and modelling for heat and mass transfer

V. P. Mulgundmath et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon dioxide adsorption performance of N-doped zeolite Y templated carbons

Jin Zhou et al.

RSC ADVANCES (2012)

Add to Collection

Article Chemistry, Physical

A simplified synthesis of N-doped zeolite-templated carbons, the control of the level of zeolite-like ordering and its effect on hydrogen storage properties

Yongde Xia et al.

CARBON (2011)

Add to Collection

Article Chemistry, Physical

Superior CO2 Adsorption Capacity on N-doped, High-Surface-Area, Microporous Carbons Templated from Zeolite

Yongde Xia et al.

ADVANCED ENERGY MATERIALS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

XPS and FT-IR investigation of silicate polymers

Morten E. Simonsen et al.

JOURNAL OF MATERIALS SCIENCE (2009)

Add to Collection

Article Chemistry, Applied

Structural and physicochemical properties of natural zeolites: clinoptilolite and mordenite

O Korkuna et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.