☆ 4.7 Article

Simultaneously enhanced thermal conductivity and dielectric properties of borosilicate glass-based LTCC with AlN and h-BN additions

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Ceramics

A review on the preparation and application of BN composite coatings

Xiaoli Sun et al.

Summary: This paper analyzes the mechanical, thermal, electrical and wetting properties of hexagonal boron nitride (h-BN), a functional ceramic material with excellent physical and chemical properties. However, the high melting point of h-BN poses challenges in preparing coating materials via traditional sintering process. Several processes for preparing h-BN composite coatings are summarized in this paper. The different forms of h-BN composite coatings are reviewed based on their characteristics, and the future application prospects of h-BN coatings are forecasted considering the existing problems.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Ceramics

Influence of sintering temperature on the crystallization and mechanical properties of BN-MAS composites

Haoyi Wang et al.

Summary: In this study, a boron nitride-magnesium aluminum silicate (BN-MAS) composite ceramics were fabricated using hot-press sintering at different temperatures. The relationship between sintering temperature and microstructure was investigated, showing that h-BN had a significant inhibitory effect on the crystallization of the MAS system at temperatures above 1400 degrees C. The composite sintered at 1700 degrees C exhibited the highest bending strength.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Promoting h-BN dispersion in cellulose-based composite by lignosulfonate for regulatable effectual thermal management

Xiu Wang et al.

Summary: This study utilizes water-soluble lignosulfonate to enhance the dispersion of hexagonal boron nitride and develops a three-dimensional thermally conductive pathway by combining it with cellulose nanofiber. The LS-BN/CNF aerogel exhibits high thermal conductivity and acceptable thermal stability and mechanical properties, making it a promising material for thermal interface applications.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Ceramics

Thermally conductive hexagonal boron nitride/spherical aluminum oxide hybrid composites fabricated with epoxyorganosiloxane

Gayoung Lim et al.

Summary: The study focused on enhancing the thermal conductivity of h-BN composites by using an epoxyorganosiloxane with low viscosity and incorporating spherical aluminum oxides. This led to an improvement in through-plane thermal conductivity and a reduction in viscosity despite higher filler loading in the h-BN/AO hybrid composites.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Influence of silicon carbide nanowires on the properties of Bi-B-Si-Zn-Al glass based low temperature co-fired ceramics

Lan Zhang et al.

Summary: In this study, the performance of a low-temperature sintered Bi-B-Si-Zn-Al glass/Al2O3/SiC nanowires composite fabricated by the tape casting method was investigated. The addition of 0.5 wt% SiC nanowires increased the thermal conductivity of the composite, and it also exhibited low thermal expansion and high dielectric constant.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Engineering, Environmental

Advances in synthesis and applications of boron nitride nanotubes: A review

Tao Xu et al.

Summary: This paper briefly reviews the development history of boron nitride nanotubes (BNNTs) and updates the recent advances in their synthesis and applications. It focuses on the CVD method, discussing the experiment devices, precursors, catalyst, temperature, and growth mechanisms. It also summarizes the advanced applications of BNNTs in composites, water purification membranes, biological applications, and optical devices, and discusses future challenges and opportunities.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Properties and applications of boron nitride nanotubes

Emine Ayse Turhan et al.

Summary: Nanomaterials, specifically carbon and boron nitride nanostructures, have gained significant attention due to their controllable properties and improved performance. Carbon nanostructures have been widely researched for a range of applications, while boron nitride nanostructures have emerged as a promising alternative due to their enhanced thermal and chemical stabilities. Among these nanostructures, one-dimensional boron nitride nanostructures exhibit unique properties and are being developed for various applications. This review discusses the properties and applications of one-dimensional boron nitride nanostructures in hydrogen uptake, biomedical field, and nanodevices, as well as the research on their modified forms and composites with other materials to enhance their properties.

NANOTECHNOLOGY (2022)

Add to Collection

Article Materials Science, Ceramics

Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG

Zhuo Zhang et al.

Summary: In this study, textured hexagonal boron nitride (h-BN) matrix composite ceramics were prepared using different contents of sintering additive. The addition of 3Y(2)O(3)-5Al(2)O(3) as sintering additive led to the in situ formation of YAG liquid phase, which showed good wettability to h-BN grains. The resulting composite ceramics exhibited anisotropic mechanical and thermal properties due to the oriented microstructure with the c-axis of h-BN grains parallel to the sintering pressure direction.

JOURNAL OF ADVANCED CERAMICS (2022)

Add to Collection

Article Materials Science, Ceramics

A novel type of composite LTCC material for high flexural strength application

Tianying Qin et al.

Summary: The novel high flexural strength LTCC material, consisting of xAl(2)O(3)+ (1-x) BaO-Al2O3SiO2-B2O3-ZnO-CaO-MgO (x = 35-50 wt. %) glass-ceramics, was synthesized and discussed for its excellent thermal, mechanical, and microwave dielectric properties. The composites could be densely sintered at 950 degrees C/2 h, showing promising potential for various applications.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Novel silicothermic reduction method to obtain Si3N4 ceramics with enhanced thermal conductivity and fracture toughness

Weide Wang et al.

Summary: The development of bimodal microstructure is crucial for the thermal conductivity and fracture toughness of Si3N4 ceramics. The combination of SRT and GPS was used to promote the development of bimodal microstructure, resulting in improved performance of the ceramic materials.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Rapid fabrication of surface microstructures on AlN HTCC substrate by chemically assisted laser ablation

Xinlei Zhang et al.

Summary: Aluminium nitride high-temperature co-fired ceramic (AlN HTCC) substrate is a preferred electronic packaging material due to its low thermal expansion coefficient, low dielectric constant, low dielectric loss, and high thermal conductivity. A rapid fabrication method involving chemically assisted laser ablation has been proposed to machine microstructures on AlN HTCC substrates, aiming to increase the specific surface area and enhance the heat dissipation performance.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of thermal conductivities and simulation model for glass fabrics reinforced epoxy laminated composites via introducing hetero-structured BNN-30@BNNS fillers

Xuetao Shi et al.

Summary: Hetero-structured thermally conductive boron nitride and boron nitride nanosheets fillers were prepared by electrostatic self-assembly method and used to fabricate thermally conductive & electrically insulating laminated composites. These fillers showed significant improvement in thermal conductivity of epoxy composites and led to enhanced heat transfer efficiency.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Improved tri-layer microwave dielectric ceramic for 5 G applications

Shun Wang et al.

Summary: The multilayer architecture of ZnTi0.97Ge0.03Nb2O8-TiO2-ZnTi0.97Ge0.03Nb2O8 ceramics demonstrates advantages and control over microwave dielectric properties. Through the interaction of components in the tri-layer structure, a cooperative optimization of microwave dielectric properties is achieved.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Challenges and solutions in surface engineering and assembly of boron nitride nanosheets

Zhen Liu et al.

Summary: This article critically reviews the challenges and solutions in surface engineering and assembly of BNNSs, outlining mechanistic insights of tunable surface functionalization and highlighting recent breakthroughs and trends in the field.

MATERIALS TODAY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Sintering behaviors, microstructures and dielectric properties of CaO-B2O3-SiO2 glass ceramic for LTCC application with various network modifiers content

Chengyu Yang et al.

Summary: The study focused on the impact of double alkali metal oxides on CaO-B2O3-SiO2 glass ceramic, and found that adding an appropriate amount of Na2O and K2O significantly improved the material's properties, such as sintering characteristics and dielectric properties.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Article Materials Science, Composites

Enhanced thermal conductivity of carbon nitride-doped graphene/polyimide composite film via a deciduous-like strategy

Yanyan Wang et al.

Summary: By doping reduced graphene oxide with carbon nitride into polyimide film, a high thermal conductivity and excellent electrical insulation at low filler loading were achieved.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Study of Li2O addition on crystallization behavior and thermal expansion properties of CaO-Al2O3-SiO2 (CAS) glass-ceramic and its application for joining SiC ceramic

Jian Fang et al.

Summary: The addition of Li2O reduced the crystallization activation energy of glass, promoted the precipitation of spodumene and wollastonite, and suppressed the precipitation of anorthite. By controlling the Li2O content and crystallization treatment, the coefficient of thermal expansion of glass-ceramic could be adjusted within a certain range. The glass-ceramic with 3 wt.% of Li2O showed a CTE that was well-matched with SiC ceramic, and exhibited excellent wettability and weldability.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Simultaneously enhanced dielectric properties and through-plane thermal conductivity of epoxy composites with alumina and boron nitride nanosheets

Zhengdong Wang et al.

Summary: The study demonstrated that adding hybrid fillers into epoxy resin can significantly enhance the through-plane thermal conductivity while maintaining good dielectric properties, with extremely low dielectric loss. Bonds models, including covalent bonding and hydrogen-bond interaction, were proposed to analyze the thermal conductivity and dielectric properties.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Materials Science, Ceramics

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Zhilei Wei et al.

Summary: By adjusting the N-2 pressure, NH4Cl content, and Al particle size, the combustion reaction process, phase composition, and microstructure of AlN particles can be controlled. Within a certain range, low N-2 pressure, a small amount of NH4Cl, and fine Al particles contribute to the formation of nearly spherical AlN particles.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Ceramics

High-thermally conductive AlN-based microwave attenuating composite ceramics with spherical graphite as attenuating agent

Xia Fang et al.

Summary: AlN-based microwave attenuating composite ceramics with spherical graphite (SG) as the attenuating agent exhibit high thermal conductivity, moderate toughening effect, and improved dielectric properties. The addition of an optimal amount of SG can enhance the thermal conductivity of the composites, but excessive addition may affect the mechanical and absorption properties of the materials.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of graphene addition on a borosilicate glass/alumina composite for LTCC technology

Yuanyuan Lv et al.

Summary: The study systematically investigated the influence of graphene nanoplatelets on the thermal conductivity of composite materials, showing that the addition of 0.75 wt% GNPs significantly increased the thermal conductivity of the sintered sheets, while maintaining low dielectric constant and dielectric loss. The coefficients of thermal expansion of the sintered sheets displayed a decrease followed by an increase trend, with the GNPs(0.75)/Al2O3/ZBNAS composite having negative and positive CTE values in low and high temperature ranges. Moreover, the graphene-based LTCC materials are considered promising candidates for electronic devices with high thermal conductivity requirements.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Baofu Qiu et al.

Summary: BN/La-Al-Si-O composite ceramics were fabricated by hot-pressed sintering using h-BN, La2O3, Al2O3, and SiO2. The presence of La-Al-Si-O liquid phase during sintering facilitated the growth of h-BN grains, while simultaneous cristobalite phase precipitation and h-BN grain growth at higher sintering temperatures significantly influenced densification and mechanical properties. Optimal mechanical properties were achieved at a sintering temperature of 1700 degrees C.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Ceramics

Improvement in mechanical properties in AlN-h-BN composites with high thermal conductivity

Zetan Liu et al.

Summary: The machinability of aluminum nitride-hexagonal boron nitride (AlN-h-BN) ceramics can be improved while maintaining high strength and thermal conductivity by incorporating up to 30 wt% BN as a secondary phase and using yttrium oxide as a sintering aid. The addition of sintering additives helps purify grain boundaries and enhance densification. The optimal BN content enhances flexural strength and fracture toughness of the composite ceramics.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Intrinsic toughening and stable crack propagation in hexagonal boron nitride

Yingchao Yang et al.

Summary: This study discovered the high fracture toughness of single-crystal monolayer h-BN, contrary to expectations, enabling stable crack propagation through crack deflection and branching to enhance material toughness. This provides new technological opportunities and applications for monolayer h-BN.

NATURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

High Performance of Low-Temperature-Cofired Ceramic with Al2O3/BN Biphasic Ceramics Based on B2O3-Bi2O3-SiO2-ZnO Glass

Xiangyan Feng et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Hot-pressing sintered AIN-BN ceramics with high thermal conductivity and low dielectric loss

Pei Yang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of AlN addition on phase formation in the LTCC with Al2O3/AlN biphasic ceramics based on BBSZ glass

Xiangyan Feng et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Significant improvement of thermal conductivity for AlN/LAS composite with low thermal expansion

Zhenyu Li et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Application of composite binders in the fabrication of LTCC green tape based on the borosilicate glass/Al2O3 system with optimized Ca/Mg ratios

Luchao Ren et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Additively manufactured ultra-low sintering temperature, low loss Ag2Mo2O7 ceramic substrates

Athanasios Goulas et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Glass alumina composites for functional and structural applications

Gulsum Meryem Dursun et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Microwave dielectric properties of low firing temperature stable scheelite structured (Ca,Bi)(Mo,V)O4 solid solution ceramics for LTCC applications

Huan-Huan Guo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Thermal properties and thermal shock resistance of BAS-BN composite ceramics

Qian Li et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Hot-pressing sintered BN-SiO2 composite ceramics with excellent thermal conductivity and dielectric properties for high frequency substrate

Liangliang Wu et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Review Materials Science, Ceramics

The tape casting process for manufacturing low-temperature co-fired ceramic green sheets: A review

Luchao Ren et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Manufacturing a high performance film of CaO-B2O3-SiO2 glass-ceramic powder with surface modification for LTCC application

Yunsheng Xia et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Fabrication of a high-performance film based borosilicate glass/Al2O3 ceramics for LTCC application

Luchao Ren et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Solution Processed Boron Nitride Nanosheets: Synthesis, Assemblies and Emerging Applications

Wei Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Effect of one-dimensional materials on the thermal conductivity of Al2O3/glass composite

Shuangxi Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Physical

Microstructure and properties of AlN-BN composites prepared by sparking plasma sintering method

Xiulan He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Ceramics

Review on the properties of hexagonal boron nitride matrix composite ceramics

Xiaoming Duan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Add to Collection

Article Materials Science, Ceramics

Aluminium oxynitride-hexagonal boron nitride composites with anisotropic properties

Agnieszka Wilk et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Add to Collection

Article Materials Science, Ceramics

LTCC tapes based on Al2O3-BBSZ glass with improved thermal conductivity

I. J. Induja et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Ceramics

Gas pressure sintering of BN/Si3N4 wave-transparent material with Y2O3-MgO nanopowders addition

Yujun Zhao et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Chemistry, Physical

Synthesis and properties of borosilicate/AlN composite for low temperature co-fired ceramics application

Lina Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Ceramics

A strategy for fabricating textured silicon nitride with enhanced thermal conductivity

Xin Wen Zhu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Large-scale exfoliation of hexagonal boron nitride nanosheets in liquid phase

Li Cao et al.

MATERIALS EXPRESS (2014)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity of low-temperature sintered calcium aluminosilicate glass-silicon nitride whisker composites

Mingsheng Ma et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Materials Science, Ceramics

Enhanced thermal conductivity of low-temperature sintered borosilicate glass-AlN composites with β-Si3N4 whiskers

Mingsheng Ma et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

Add to Collection

Review Materials Science, Ceramics

Towards rational design of low-temperature co-fired ceramic (LTCC) materials

Ji Zhou

JOURNAL OF ADVANCED CERAMICS (2012)

Add to Collection

Article Chemistry, Physical

Reaction-sintering method for ultra-low loss (Mg0.95Co0.05)TiO3 ceramics

Lingxia Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Materials Science, Ceramics

Fabrication and characterization of Li1+x-yNb1-x-3yTix+4yO3 substrates using aqueous tape casting process

Shaochun Li et al.

CERAMICS INTERNATIONAL (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Low loss dielectric materials for LTCC applications: a review

M. T. Sebastian et al.

INTERNATIONAL MATERIALS REVIEWS (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.