☆ 4.7 Article

Towards H2 implementation in the iron- and steelmaking industry: State of the art, requirements, and challenges for refractory materials

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Hydrogen production by methane pyrolysis in molten binary copper alloys

David Scheiblehner et al.

Summary: The utilization of hydrogen as an energy carrier and reduction agent is crucial for a sustainable future, and steam reforming of methane is the primary method for hydrogen production. However, it generates carbon dioxide as a byproduct. Methane pyrolysis offers a carbon dioxide-free alternative, producing solid carbon along with hydrogen. This study investigates different molten copper alloys as catalytic media for methane pyrolysis, demonstrating their influence on methane conversion rate and carbon properties. Optimizing these parameters is essential for achieving economic competitiveness.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of the Electrodes' Shape and Graphite Quality on the Arc Stability During Hydrogen Plasma Smelting Reduction of Iron Ores

Daniel Ernst et al.

Summary: Reducing greenhouse gases, especially CO2, is essential for addressing climate change. The European steel industry is responsible for 5.7% of the total EU emissions and needs to reduce its GHG emissions. Hydrogen plasma smelting reduction is a promising technology that can eliminate CO2 emissions by directly reducing iron ore to steel in one step. Experiments were conducted to study the impact of graphite quality, tip geometry, and electrode gap on arc stability. The results were evaluated to determine stable process parameters and create stability maps and fields.

STEEL RESEARCH INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

Andreas Pfeiffer et al.

Summary: Hydrogen-based direct reduction is a promising technology for CO2 lean steelmaking, with the electric arc furnace being the most relevant equipment for processing direct reduced iron (DRI). The behavior of DRI in the arc area is of great interest. Laboratory-scale experiments were conducted using a hydrogen plasma smelting reduction (HPSR) reactor under inert conditions. The results showed that carburized DRI is preferable, and the addition of slag-forming oxides in the arc has a mixing effect.

METALS (2023)

Add to Collection

Review Chemistry, Physical

A review on hydrogen production and utilization: Challenges and opportunities

Haris Ishaq et al.

Summary: This paper critically analyzes the state-of-the-art in blue and green hydrogen production methods, utilization of hydrogen, storage, transportation, distribution, and key challenges and opportunities in the commercial deployment of such systems. It highlights the potential of hydrogen as a new energy vector that can serve multiple purposes blending the roles of fuel energy carrier and energy storage modality.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Magnesium-Modified Co3O4 Catalyst with Remarkable Performance for Toluene Low Temperature Deep Oxidation

Abraham Atour Zigla et al.

Summary: Co3O4, MgCo2O4, and MgO materials were synthesized using a co-precipitation approach and characterized. Among these materials, spinel MgCo2O4 exhibited the highest activity in the total conversion of toluene to CO2 and H2O. It achieved almost 100% oxidation of toluene at 255 degrees C. This superior activity can be attributed to its larger surface area, higher oxygen absorption, more oxygen vacancies, and better redox capability compared to single metal oxides.

CATALYSTS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Contribution of CO2 Emissions from Basic Oxygen Steelmaking Process

Nirmal Madhavan et al.

Summary: The steelmaking process is energy-intensive and contributes significantly to greenhouse gas emissions. The study analyzes the impact of the basic oxygen furnace (BOF) process on global warming potential (GWP) and identifies increasing scrap percentage as an effective way to reduce CO2 emissions. However, there are potential issues associated with increased scrap usage.

METALS (2022)

Add to Collection

News Item Multidisciplinary Sciences

The hydrogen revolution

Davide Castelvecchi

NATURE (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

HISTORICAL OVERVIEW OF REFRACTORY LINING IN THE BLAST FURNACE

Tatjana Volkov Husovic et al.

Summary: The majority of refractories used today are associated with the iron and steel industries. The refractory lining of a blast furnace is chosen based on different portions of the furnace and process conditions. Understanding the iron manufacturing system and the qualities of refractories determine the choice of refractory combination. Inadequate understanding of these components often leads to refractory failure.

METALLURGICAL & MATERIALS ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Phosphorus reduction behavior of high-phosphate iron ore during hydrogen-rich sintering

Yanbiao Chen et al.

Summary: This study proposed a method for phosphorus removal by gasification in the hydrogen-rich sintering process and investigated the reduction mechanism of phosphorus in hydrogen-rich sintering and the reduction kinetics of apatite. The results showed that increasing the reduction time improved the dephosphorization rate. Apatite reduction mainly occurred in the sintering and burning zones, and the reduced phosphorus gas was partially adsorbed when passing through the drying and wet zones.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Hydrogen plasma smelting reduction process monitoring with optical emission spectroscopy-Establishing the basis for the method

Henri Pauna et al.

Summary: In the quest for carbon-free steel, hydrogen and recycling play crucial roles. However, the quantity of steel made from recycled materials may not meet future demand, requiring production from conventional resources like iron ore. Hydrogen has been proposed as an eco-friendly alternative to carbon, and hydrogen plasma smelting reduction has been extensively studied. This study uses optical emission spectroscopy to characterize and evaluate hydrogen plasma, providing means for process control.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical Investigation of Burden Distribution in Hydrogen Blast Furnace

Jing Li et al.

Summary: The study examines the effects of peripheral opening extent and shaft-injected hydrogen flow rate on the performance of a hydrogen blast furnace using computational fluid dynamics. Increasing the peripheral opening extent hinders the pre-reduction and pre-heating roles of shaft-injected hydrogen, but improves the CO indirect reduction rate. Increasing the shaft-injected hydrogen flow rate slows down the CO indirect reduction rate but enhances the H-2 indirect reduction rate.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Isothermal Hydrogen Reduction of a Lime-Added Bauxite Residue Agglomerate at Elevated Temperatures for Iron and Alumina Recovery

Olivia Bogen Skibelid et al.

Summary: In this study, a new process route was developed to recover iron and alumina from bauxite residue by hydrogen reduction at elevated temperatures. The study found that the reduction of bauxite residue lime pellets was temperature-dependent and resulted in the conversion of iron and alumina to metallic iron and leachable mayenite, respectively.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Investigation on Application Prospect of Refractories for Hydrogen Metallurgy: The Enlightenment from the Reaction between Commercial Brown Corundum and Hydrogen

Shaofei Li et al.

Summary: Refractories in the hydrogen metallurgy field face new requirements. This study investigated the stability of oxides in brown corundum under high-purity hydrogen through thermodynamic calculations and reduction experiments. The results show that high-purity Al2O3 and hibonite-based refractories hold promise as lining materials due to their excellent chemical stability under hydrogenous environments.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Investigations on the Interaction Behavior between Direct Reduced Iron and Various Melts

Andreas Pfeiffer et al.

Summary: In response to ambitious CO2 emission targets set by the European Union, low-carbon-emission alternatives to the commonly used integrated blast furnace-basic oxygen furnace (BF-BOF) steelmaking strategy are needed. Direct reduction (DR) utilizing natural gas as the reducing agent has emerged as a viable alternative in industrial practice. This study focuses on the melting behavior of the intermediate product, direct reduced iron (DRI), in electric arc furnaces (EAF) or submerged arc furnaces (SAF), and conducts experiments to simulate the first few seconds after charging DRI.

MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Effect of H2 on Blast Furnace Ironmaking: A Review

Chenchen Lan et al.

Summary: The paper summarizes the impact of hydrogen-rich smelting on the ironmaking process in blast furnaces and proposes further research directions, providing important references for the green transformation of iron and steel enterprises.

METALS (2022)

Add to Collection

Article Thermodynamics

Green hydrogen in Europe - A regional assessment: Substituting existing production with electrolysis powered by renewables

G. Kakoulaki et al.

Summary: The study finds that in Europe, using renewable energy for water electrolysis to produce green hydrogen can effectively replace carbon-intensive hydrogen production, with the potential to achieve carbon neutrality at both regional and national levels.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Energy & Fuels

Modeling of hydrogen shaft injection in ironmaking blast furnaces

Xiaobing Yu et al.

Summary: The study using a multi-fluid BF model investigates the impact of hydrogen shaft injection on BF performance, revealing significant effects on gas flow field, thermal field, and reduction behaviors. With increasing injection rate, hydrogen penetration depth increases, apex of cohesive zone shifts upwards with more concave profile, and both reduction degree of iron oxides and thermal conditions in the shaft improve, leading to a significantly decreased fossil fuel rate.

FUEL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Hydrogen direct reduction (H-DR) in steel industry-An overview of challenges and opportunities

R. R. Wang et al.

Summary: The steel industry is crucial for the national economy, but its high energy intensity and carbon emissions contribute significantly to global warming. To reduce carbon footprint, countries and steel companies are developing low-carbon steelmaking technologies, with H-DR technology considered the most promising.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Environmental

Nickel-magnesium mixed oxide catalyst for low temperature methane oxidation

Gianni Caravaggio et al.

Summary: The NiMg catalysts exhibited good activity for complete methane oxidation, with Ni9Mg showing the highest performance. Ni9Mg, as a promising low-cost alternative to PGM-based catalysts, achieved approximately 94% methane conversion after 40 hours, outperforming the Pd-based reference catalyst.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Process Improvements for Direct Reduced Iron Melting in the Electric Arc Furnace with Emphasis on Slag Operation

Marcus Kirschen et al.

Summary: Steelmaking based on direct reduced iron offers a lower CO2 emission alternative to traditional blast furnace production, with DRI being melted and refined in electric arc furnaces under different conditions. Data and analysis of slag composition in 16 EAFs are provided to optimize slag operation and improve the DRI melting process in EAFs.

PROCESSES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Sustainable steel through hydrogen plasma reduction of iron ore: Process, kinetics, microstructure, chemistry

I. R. Souza Filho et al.

Summary: Iron- and steelmaking is a major contributor to global CO2 emissions, prompting the need for alternative technologies. Utilizing hydrogen plasma for hematite reduction shows promise in reducing emissions and improving efficiency, with potential for sustainable steel production.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of fluorspar on the interfacial reaction between electric arc furnace slag and magnesia refractory: Competitive corrosion-protection mechanism of magnesiowustite layer

Min Kyo Oh et al.

Summary: The study investigated the interfacial reaction between CaO-SiO2-FeO-Al2O3-MnO-MgO-xCaF2 type electric arc furnace steelmaking slag and magnesia refractory. It was found that the CaF2 content in the slag affects the thickness of the solid solution layer, and by varying the MgO content in the slag, the depth of refractory dissolution and slag penetration were determined. The study also proposed a critical CaF2 content of approximately 3 wt% that had no significant effect on refractory corrosion.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Assessment of natural gas/hydrogen blends as an alternative fuel for industrial heat treatment furnaces

Markus Mayrhofer et al.

Summary: This study investigates the application of natural gas/hydrogen blends as an alternative fuel for industrial heat treatment furnaces and their economic potential for decreasing carbon dioxide emissions. Detailed technological analysis of influencing parameters on the heating system was performed. The study showed ways to decrease flue gas losses and increase heat transfer, as well as evaluating the capabilities of control systems for regulating gas flow rates of blends with varying hydrogen contents.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Review of hydrogen-rich ironmaking technology in blast furnace

Yanbiao Chen et al.

Summary: Global warming has prompted the steel industry to use hydrogen-rich fuel to reduce CO2 emissions and energy consumption. The introduction of hydrogen-rich fuels and their effects on burden reduction and property evolution have been discussed, along with a summary of hot events related to hydrogen metallurgy. Increasing hydrogen content changes the thermodynamic and kinetic conditions of chemical reactions, affecting the reduction behavior of iron oxides and the efficiency of blast furnace operation.

IRONMAKING & STEELMAKING (2021)

Add to Collection

Article Thermodynamics

Towards CO2-neutral process heat generation for continuous reheating furnaces in steel hot rolling mills - A case study

N. Schmitz et al.

Summary: The aim is to move away from fossil fuels by massively reducing CO2 emissions. Options for CO2-free technologies in the steel hot rolling process are discussed, highlighting the impact on CO2 emissions. Each alternative has significant potential to save CO2 emissions depending on the electricity generation mix and renewable energy sources.

ENERGY (2021)

Add to Collection

Review Engineering, Chemical

Methane Pyrolysis for Zero-Emission Hydrogen Production: A Potential Bridge Technology from Fossil Fuels to a Renewable and Sustainable Hydrogen Economy

Nuria Sanchez-Bastardo et al.

Summary: Hydrogen is crucial in industrial applications and is currently being produced with various methods. Methane pyrolysis, a cleaner technology using natural gas, is a CO2-free method that can act as a bridge from fossil fuels to renewable energies.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Review Chemistry, Physical

A review on the fundamentals of hydrogen-based reduction and recycling concepts for electric arc furnace dust extended by a novel conceptualization

Ulrich Brandner et al.

Summary: The European Green Deal aims to achieve climate neutrality in Europe by 2050, prompting the metallurgical industry to shift towards using hydrogen. Current research focuses on hydrogen-based reduction processes for Electric Arc Furnace Dust, offering potential ways to treat the dust and highlighting the advantages and challenges of using hydrogen as a reducing agent.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

CFD Study of Hydrogen Injection in Blast Furnaces: Tuyere Co-injection of Hydrogen and Coal

Yiran Liu et al.

Summary: This study improved a CFD model to investigate the co-injection of hydrogen/coal in ironmaking blast furnaces, showing that increasing hydrogen injection affects coal combustion characteristics. The model provides a tool for designing and optimizing the co-injection of hydrogen and coal.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)

Add to Collection

News Item Multidisciplinary Sciences

CHINA PREPARES TO TEST THORIUM-FUELLED NUCLEAR REACTOR

Smriti Mallapaty

NATURE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

The Effect of High-Temperature Water Vapour on Degradation and Failure of Hot Section Components of Gas Turbine Engines

Kuiying Chen et al.

Summary: The article discusses the detrimental effects of high-temperature water vapor on the degradation and lifespan of hot components in gas turbines, focusing on the degradation of thermally grown oxides, the formation of non-protective oxides in TBCs, and the degradation of EBCs under harsh operating conditions.

COATINGS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of H2 addition on process of primary slag formation in cohesive zone

Ya-na Qie et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

MgO Refractory Attack by Transient Non-saturated EAF Slag

Shengqiang Song et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

Masab Naseri Seftejani et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen Ironmaking: How It Works

Fabrice Patisson et al.

METALS (2020)

Add to Collection

Editorial Material Environmental Sciences

The hydrogen solution?

Sonja van Renssen

NATURE CLIMATE CHANGE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A General Vision for Reduction of Energy Consumption and CO2Emissions from the Steel Industry

Lauri Holappa

METALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A Study on the Stability Fields of Arc Plasma in the HPSR Process

Michael Andreas Zarl et al.

METALS (2020)

Add to Collection

Article Chemistry, Physical

Microwave-initiated catalytic deconstruction of plastic waste into hydrogen and high-value carbons

Xiangyu Jie et al.

NATURE CATALYSIS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

On the Direct Reduction Phenomena of Bauxite Ore Using H2 Gas in a Fixed Bed Reactor

Adamantia Lazou et al.

JOURNAL OF SUSTAINABLE METALLURGY (2020)

Add to Collection

Article Chemistry, Physical

Effect of Co incorporation and support selection on deoxygenation selectivity and stability of (Co)Mo catalysts in anisole HDO

Chanakya Ranga et al.

APPLIED CATALYSIS A-GENERAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Doping α-Al2O3 to reduce its hydrogen permeability: Thermodynamic assessment of hydrogen defects and solubility from first principles

Vrindaa Somjit et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Interaction of Iron with Alumina Refractory Under Flash Ironmaking Conditions

Rahul Sarkar et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Add to Collection

Review Nuclear Science & Technology

Hydrogen permeation barriers: Basic requirements, materials selection, deposition methods, and quality evaluation

Vincenc Nemanic

NUCLEAR MATERIALS AND ENERGY (2019)

Add to Collection

Review Thermodynamics

Hydrogen production, storage, transportation and key challenges with applications: A review

Abdalla M. Abdalla et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of steam corrosion and water quenching behavior of zirconium-silicide coated LWR fuel claddings

Hwasung Yeom et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Hydrogen Addition on Softening and Melting Reduction Behaviors of Ferrous Burden in Gas-Injection Blast Furnace

Yana Qie et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Assessment of hydrogen direct reduction for fossil-free steelmaking

Valentin Vogl et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc Furnace Slag

Jung Ho Heo et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

Add to Collection

Review Chemistry, Physical

Hydrogen embrittlement in different materials: A review

Sandeep Kumar Dwivedi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of CO2 and H2O on gasification dissolution and deep reaction of coke

Zhi-yu Chang et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Cycle Stability and Hydration Behavior of Magnesium Oxide and Its Dependence on the Precursor-Related Particle Morphology

Georg Gravogl et al.

NANOMATERIALS (2018)

Add to Collection

Article Materials Science, Ceramics

Study on water corrosion behavior of ZrSiO4 materials

Ling Liu et al.

JOURNAL OF ADVANCED CERAMICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The hydrogen-induced pitting corrosion mechanism in duplex stainless steel studied by current-sensing atomic force microscopy

Vladislav Yakubov et al.

NPJ MATERIALS DEGRADATION (2018)

Add to Collection

Article Engineering, Chemical

Reduction of Mg from a MgO/MgAl2O4 support by atomic hydrogen permeation through thin-film Pd membranes

Sean-Thomas B. Lundin et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Proceedings Paper Engineering, Environmental

Hydrogen Production from Steam Reforming of Ethylene Glycol over Iron Loaded on MgO

Mingqiang Chen et al.

2016 INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, RESOURCE AND ENVIRONMENTAL ENGINEERING (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

Selective hydrogenolysis of glycerol to 1,2-propanediol over highly active copper-magnesia catalysts: reaction parameter, catalyst stability and mechanism study

Satyanarayana Murty Pudi et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Volume Breakage Due to DI Measurement on Pore Structure in Coke

Naoto Sakimoto et al.

ISIJ INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Applied

Selective Hydrogenolysis of Glycerol to 1,2-Propanediol over Highly Active and Stable Cu/MgO Catalyst in the Vapor Phase

Nitin Naresh Pandhare et al.

ORGANIC PROCESS RESEARCH & DEVELOPMENT (2016)

Add to Collection

Article Multidisciplinary Sciences

Oxygen-Deficient Zirconia (ZrO2-x): A New Material for Solar Light Absorption

Apurba Sinhamahapatra et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Astronomy & Astrophysics

SOLUBILITY OF ROCK IN STEAM ATMOSPHERES OF PLANETS

Bruce Fegley et al.

ASTROPHYSICAL JOURNAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon dioxide reforming of methane for syngas production over Co-MgO mixed oxide nanocatalysts

Fateme Mirzaei et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection

Article Chemistry, Physical

Hydrogen Surface Reactions and Adsorption Studied on Y2O3, YSZ, and ZrO2

Michaela Kogler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

The analysis of magnesium oxide hydration in three-phase reaction system

Xiaojia Tang et al.

JOURNAL OF SOLID STATE CHEMISTRY (2014)

Add to Collection

Article Materials Science, Ceramics

Kinetics and Activation Energy of Magnesium Oxide Hydration

Jeffrey J. Thomas et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Ceramics

A Comprehensive Study of the Carbon Contamination in Tellurite Glasses and Glass-Ceramics Sintered by Spark Plasma Sintering (SPS)

Anthony Bertrand et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Add to Collection

Article Engineering, Chemical

Reduction of Oxide Minerals by Hydrogen Plasma: An Overview

K. C. Sabat et al.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Simulation of Blast Furnace Operation with Hydrogen Injection

Hiroshi Nogami et al.

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN (2014)

Add to Collection

Article Chemistry, Physical

Desorption of Furfural from Bimetallic Pt-Fe Oxides/Alumina Catalysts

Gloria Lourdes Dimas-Rivera et al.

MATERIALS (2014)

Add to Collection

Article Materials Science, Ceramics

Silicon Volatility From Alumina and Aluminosilicates Under Solid Oxide Fuel Cell Operating Conditions

Paul S. Gentile et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2012)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Simulation of Blast Furnace Operation with Intensive Hydrogen Injection

Hiroshi Nogami et al.

ISIJ INTERNATIONAL (2012)

Add to Collection

Article Thermodynamics

Influence of direct reduced iron on the energy balance of the electric arc furnace in steel industry

Marcus Kirschen et al.

ENERGY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Different degrees of weak metal-support interaction in Fe-(Ni)/Al2O3 catalyst governing activity and selectivity in carbon nanotubes' production using ethylene

S. Ratkovic et al.

MATERIALS CHEMISTRY AND PHYSICS (2011)

Add to Collection

Article Thermodynamics

Prediction of silica carry-over and solubility in steam of boilers using simple correlation

Alireza Bahadori et al.

APPLIED THERMAL ENGINEERING (2010)

Add to Collection

Review Biochemical Research Methods

Biofuel production by in vitro synthetic enzymatic pathway biotransformation

Y-H Percival Zhang et al.

CURRENT OPINION IN BIOTECHNOLOGY (2010)

Add to Collection

Article Materials Science, Ceramics

Thermodynamic evaluation of the Al2O3-H2O binary system at pressures up to 30 MPa

S. Serena et al.

CERAMICS INTERNATIONAL (2009)

Add to Collection

Article Metallurgy & Metallurgical Engineering

DIRECT IRON SMELTING REDUCTION PROCESSES

B. Anameric et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2009)

Add to Collection

Article Chemistry, Physical

Hydrogen production on iron-magnesium oxide in the high-temperature water-gas shift reaction

Amel Boudjemaa et al.

REACTION KINETICS AND CATALYSIS LETTERS (2009)

Add to Collection

Article Materials Science, Ceramics

Corrosion and recession of mullite in water vapor environment

Shunkichi Ueno et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

Add to Collection

Article Materials Science, Ceramics

Water vapor corrosion of mullite: Single crystals versus polycrystalline ceramics

Martin Schmuecker et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

Add to Collection

Article Materials Science, Ceramics

Structure and properties of mullite - A review

H. Schneider et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen as a reducing agent: State-of-the-art science and technology

Stefan Luidold et al.

JOM (2007)

Add to Collection

Article Engineering, Chemical

The hazards and risks of hydrogen

Daniel A. Crowl et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion and recession behavior of zircon in water vapor environment at high temperature

Shunkichi Ueno et al.

CORROSION SCIENCE (2007)

Add to Collection

Article Materials Science, Ceramics

A novel approach for magnesia hydration assessment in refractory castables

Rafael Salomao et al.

CERAMICS INTERNATIONAL (2007)

Add to Collection

Article Nanoscience & Nanotechnology

The high-temperature mullite/α-alumina conversion in rapidly flowing water vapor

Martin Schmuecker et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Multidisciplinary Sciences

Long-term sustainability of a high-energy, low-diversity crustal biome

Li-Hung Lin et al.

SCIENCE (2006)

Add to Collection

Article Materials Science, Ceramics

High-temperature hydroxylation and surface corrosion of 2/1-mullite single crystals in water vapor environments

Nadine Eils et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Thermodynamics

Hydration of medium reactive magnesium oxide using hydration agents

EM van der Merwe et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2006)

Add to Collection

Article Chemistry, Physical

Comparison of reducibility and stability of alumina-supported Ni catalysts prepared by impregnation and co-precipitation

GH Li et al.

APPLIED CATALYSIS A-GENERAL (2006)

Add to Collection

Article Materials Science, Ceramics

Corrosion of selected ceramic materials in hot gas environment

Marco Fritsch et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)

Add to Collection

Article Thermodynamics

Thermodynamics of gas phase species in the Si-O-H system

NS Jacobson et al.

JOURNAL OF CHEMICAL THERMODYNAMICS (2005)

Add to Collection

Review Physics, Multidisciplinary

Global warming

J Houghton

REPORTS ON PROGRESS IN PHYSICS (2005)

Add to Collection

Article Materials Science, Ceramics

Kinetics of the hydrogen reduction of silica incorporating the effect of gas-volume change upon reaction

G Han et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)

Add to Collection

Article Chemistry, Analytical

Structural and compositional characterization of yttria-stabilized zirconia: Evidence of surface-stabilized, low-valence metal species

MB Pomfret et al.

ANALYTICAL CHEMISTRY (2005)

Add to Collection

Article Materials Science, Ceramics

Water vapor corrosion of mullite containing small amount of sodium

S Ueno et al.

CERAMICS INTERNATIONAL (2005)

Add to Collection

Article Materials Science, Ceramics

Hydrogen permeation measurements on alumina

E Serra et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)

Add to Collection

Article Materials Science, Ceramics

Alumina volatility in water vapor at elevated temperatures

EJ Opila et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)

Add to Collection

Article Multidisciplinary Sciences

Sustainable hydrogen production

JA Turner

SCIENCE (2004)

Add to Collection

Article Biotechnology & Applied Microbiology

Kinetics and mechanistic analysis of caustic magnesia hydration

SDF Rocha et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2004)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Numerical analysis on injection of hydrogen bearing materials into blast furnace

M Chu et al.

ISIJ INTERNATIONAL (2004)

Add to Collection

Letter Materials Science, Multidisciplinary

Corrosion behavior of Al2O3 in static state water vapor environment at high temperature

S Ueno et al.

JOURNAL OF MATERIALS SCIENCE (2004)

Add to Collection

Article Chemistry, Physical

Temperature-programmed reduction and acidic properties of molybdenum supports on MgO-Al2O3 and their correlation with catalytic activity

M Kumar et al.

JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2004)

Add to Collection

Article Materials Science, Ceramics

Hydrogen diffusion in fused silica at high temperatures

V Lou et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2003)

Add to Collection

Article Chemistry, Physical

Structure and stability of aluminum hydroxides: A theoretical study

M Digne et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2002)

Add to Collection

Article Engineering, Chemical

Plasma pyrolysis of methane to hydrogen and carbon black

JR Fincke et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2002)

Add to Collection

Article Chemistry, Physical

The stoichiometry of hydrogen reduced zirconia and its influence on catalytic activity - Part 1: Volumetric and conductivity studies

D Eder et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2002)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The production of low phosphorus and nitrogen steels in an EAF using HBI

M Lee et al.

SCANDINAVIAN JOURNAL OF METALLURGY (2001)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Flow and diffusion analysis on the kinetics of reduction of fused silica in hydrogen

H Shirai et al.

JOURNAL OF SOLID STATE CHEMISTRY (2001)

Add to Collection

Article Chemistry, Physical

Water-assisted tetragonal-to-monoclinic phase transformation of ZrO2 at low temperatures

SB Xie et al.

CHEMISTRY OF MATERIALS (2000)

Add to Collection

Article Materials Science, Multidisciplinary

The possible reduction of alumina to aluminum using hydrogen

O Braaten et al.

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2000)

Add to Collection

Article Materials Science, Ceramics

Observations of accelerated silicon carbide recession by oxidation at high water-vapor pressures

KL More et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.