☆ 4.7 Article

Long-term ablation mechanisms of the YB4-Al2O3-Si3N4 modified Cf/ HfC-SiC composites at 2600 °C

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Xuegang Zou et al.

Summary: The ablation behavior and mechanisms of 3D-C-f/Ta0.8Hf0.2C-SiC composite were investigated under air plasma test at temperatures up to 2500 degrees C. A continuous oxide layer, composed of various oxides, was formed on the ablation surface, providing effective self-healing properties. The composite exhibited outstanding ablation-resistant performance even at extremely high temperatures, with stable protective effects.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Ceramics

Oxidation inhibition behaviors of HfB2-MoSi2-SiC oxygen blocking coating prepared by spark plasma sintering

Qingqing Yang et al.

Summary: The HfB2-MoSi2-SiC oxygen blocking coatings prepared by spark plasma sintering (SPS) technique were further enhanced in oxidation inhibition ability through pre-oxidation treatment. Adjusting the MoSi2 content and pre-oxidation process can effectively improve the oxygen blocking ability and protection efficiency of the coatings at high temperatures.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Review Materials Science, Ceramics

Advances in ultra-high temperature ceramics, composites, and coatings

Dewei Ni et al.

Summary: Ultra-high temperature ceramics (UHTCs) have ultra-high melting points, outstanding mechanical properties, and ablation resistance at elevated temperatures, making them promising materials for structural applications in extreme environments such as rockets and hypersonic vehicles. The development of high-entropy UHTCs is an emerging direction for ultra-high temperature materials.

JOURNAL OF ADVANCED CERAMICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation protection of CrSi2-HfB2-SiC/SiC coating for graphite in variable-temperature environment

Peipei Wang et al.

Summary: The synthesis of a CrSi2-HfB2-SiC/SiC coating on carbon material surface was studied for oxidation protection in a variable temperature environment. The experimental results demonstrate that the coating can effectively prevent oxidation damage to the carbon material and provide reliable service.

CORROSION SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Hao Lin et al.

Summary: This study investigates the effect of Y2O3 addition on the oxidation resistance of ZrB2-SiC-Y2O3 coating on SiC coated carbon/carbon composites. The results show that adding Y2O3 greatly enhances the oxidation-resistant properties of the coating, leading to the formation of a dense structure and yttria stabilized zirconia, Y2Si2O7, t-ZrO2 phases. The improved oxidation resistance is attributed to the formation of a Zr-Si-Y-O glass barrier layer, reduced m-ZrO2 content, and the presence of Y2Si2O7 as a pinning phase.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Engineering, Multidisciplinary

???????Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC high-entropy ceramic matrix composites

Feiyan Cai et al.

Summary: This study systematically investigated the air plasma ablation behavior of C-f/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC high-entropy ceramic matrix composites under high-temperature hypersonic conditions. The results showed that the composites exhibited excellent ablation resistance with a stable and dense oxide layer formed on the sample surface. The multiphase oxides formed during ablation provided a stable and highly self-healing protective layer for the internal materials.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Aerospace

New insights on the ablation mechanism of silicon carbide in dissociated air plasmas

Lingwei Yang et al.

Summary: This study investigates the ablation behaviors of SiC materials in re-entry environments using an inductively coupled plasma wind tunnel. New insights are obtained based on the analysis of surface characteristics, including the role of surface roughness on the critical ablation temperature and the 'from-point-to-surface' ablation process caused by surface roughness. The findings are important for optimizing the structures of SiC-based TPS in re-entry environments.

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Long-term and cyclic ablation behavior of La2O3 modified Cf/ZrB2-SiC composites at 2500?

Bo-Wen Chen et al.

Summary: The research shows that the La2O3 modification affects the long-term and cyclic ablation behavior of Cf/ZrB2-SiC composites. The formation of a ZrO2-La2O3-SiO2 liquid phase layer at 2500 degrees C reduces mass recession rates, but with poor structural stability and weakening of ZrO2 pinning effect by La2O3. This leads to increased linear recession rates with higher La2O3 content during cyclic ablation.

CORROSION SCIENCE (2022)

Add to Collection

Article Engineering, Multidisciplinary

Ablation and heat insulation performances of nose-shaped ZrC-C composites with gradient pore structure

Ningning Yan et al.

Summary: Nose-shaped ZrC-C composites with gradient pore structure (ZrC-CGS) were successfully prepared using ZrC skeleton as preform, showing superior ablation and heat insulation performance. Compared with ZrC-C composites with dense structure, ZrC-CGS composites have a lower mass ablation rate, higher heat resistance capacity, and lower coefficients of thermal expansion.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Difference evaluation on ablation behaviors of ZrC-based and ZrB2-based UHTCs coatings

Xueting Xu et al.

Summary: The study found that the ablation resistance of ZrB2-based coating was better than that of ZrC-based coating under the same environment, exhibiting lower surface temperature, thinner thickness of both the total oxide layer and the SiC-depleted layer. Possible reasons for these phenomena were speculated based on microstructure characters and thermodynamic analysis.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Fabrication and optimization of 3D-Cf/HfC-SiC-based composites via sol-gel processing and reactive melt infiltration

Youlin Jiang et al.

Summary: During the fabrication process of 3D-C-f/HfC-SiC composites, erosion of fibers and interphase is a major issue due to reactions between HfO2 and C/SiC interphase layers at high temperatures. By implementing a two-step carbothermal reduction treatment, the erosion of fibers/interphase can be reduced and mechanical properties of the composites can be improved.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Ablation behavior of HfC coating with different thickness for carbon/carbon composites at ultra-high temperature

Jian Zhang et al.

Summary: The research showed that moderate thickness of HfC coating can effectively release the thermal stress generated during ablation and improve ablation resistance. The 40 μm-thick HfC coating exhibited the best ablation resistance, alleviating thermal stress.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500?C

Bo-Wen Chen et al.

Summary: Research showed that Cf/ZrB2-SiC composite can form a protective oxide layer under high-temperature ablation conditions, but the structural stability of the oxide layer needs optimization to retard the aggregation, growth, and phase transition of ZrO2.

CORROSION SCIENCE (2021)

Add to Collection

Review Engineering, Multidisciplinary

Advanced sandwich structures for thermal protection systems in hypersonic vehicles: A review

Vinh Tung Le et al.

Summary: This paper provides a comprehensive review of recent research efforts on sandwich structures for thermal protection systems (TPS) in hypersonic vehicles, discussing topics such as structural and material design, mechanical performance, and manufacturing methods. The research shows that in the development of hypersonic vehicles, the application of sandwich structures in TPS has become increasingly important.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C

Dongyang Zhang et al.

Summary: 3D C-f/ZrB2-SiC composites with homogeneous architecture were prepared via vibration-assisted slurry impregnation combined with precursor infiltration and pyrolysis to evaluate the long-term ablation behavior of carbon fiber reinforced ultra-high temperature ceramics. The intact structure of the sample was maintained after ablation due to the formation of triple oxide layers, resulting in superior ablation resistance with specific linear and mass ablation rates.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Preparation of ZrB2-MoSi2 high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis

Menglin Zhang et al.

Summary: The ZrB2-MoSi2 coating prepared by SHS powders exhibits higher density and better oxygen blocking ability, leading to increased oxidation protection efficiency. The rise of MoSi2 content facilitates the dispersion of transition metal oxide nanocrystals, contributing to the inerting impact of the compound glass layer.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical, oxidation and ablation properties of C/(C-SiC)CVI-(ZrC-SiC)PIP composites

Jinjin Yao et al.

CORROSION SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs - a review

Jon Binner et al.

INTERNATIONAL MATERIALS REVIEWS (2020)

Add to Collection

Article Materials Science, Ceramics

Microstructure and anti-ablation performance of HfC-TaC and HfC-ZrC coatings synthesized by CVD on C/C composites

Jincui Ren et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Coatings & Films

Oxidation behavior of SiC-HfB2-Si coating on C/C composites prepared by slurry dipping combined with gaseous Si infiltration

Pei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation properties of ZrC-SiC-HfB2 ceramic with different amount of carbon fiber under an oxyacetylene flame

Maryam Shojaie-Bahaabad et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Materials Science, Ceramics

The effect of YB4 addition in ZrB2-SiC composites on the mechanical properties and oxidation performance tested up to 2000 °C

Zuzana Kovacova et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and Properties of Stable Suspensions of ZrO2-Y2O3 Powders with Different Particle Sizes for Electrophoretic Deposition

E. G. Kalinina et al.

INORGANIC MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C

Bo-Wen Chen et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Coatings & Films

Comparing oxidation behaviors at 1773 K and 1973 K of HfB2-MoSi2/SiC-Si coating prepared by a combination method of pack cementation, slurry painting and in-situ synthesis

Pei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and oxidation behavior of Cf/C-TaC composites

Z. K. Chen et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of ZrC amount and distribution on the thermomechanical properties of Cf/SiC-ZrC composites

Haijun Zhou et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Ceramics

Effects of TaC addition on microstructure and mechanical properties of SiBCN composite ceramics

Bingzhu Wang et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

Sufang Tang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C

Yi Zeng et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Advanced structural ceramics in aerospace propulsion

Nitin P. Padture

NATURE MATERIALS (2016)

Add to Collection

Article Materials Science, Ceramics

Properties of nitrogen-containing yttria-alumina-silica melts and glasses

N Saito et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.