☆ 4.7 Article

High speed impact and solid-state deposition of alumina particles: A molecular dynamics study

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2024)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Interfacial oxidation and boundary amorphization deposition mechanisms of GaN powder on metallic substrate by low-pressure cold spraying

Shaoyun Zhou et al.

Summary: Understanding the deposition mechanism of cold-sprayed GaN coatings on stainless steel substrates is important for controlling coating formation. This study investigated the formation mechanisms by analyzing the oxide layer thickness and microstructures using X-ray photo-electron spectroscopy and transmission electron microscopy. The results showed that the formation of a new interfacial oxide layer and local heteroepitaxy near the newly formed gallium oxide interface enhanced the coating formation. The study proposed insights into the formation mechanisms of cold-sprayed GaN coatings, which can support a wider range of ceramic/metal combinations in the future.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Combinatorial aerosol deposition of bismuth-antimony thermoelectric coatings with tunable composition

Guanyu Song et al.

Summary: Aerosol deposition (AD) is a commonly used material processing technique for generating dense coatings. One advantage of AD is the homogeneous mixing of different materials in the gas phase. In this study, the researchers demonstrate the application of AD in materials synthesis by directly depositing elemental precursor powders into adjustable atomic ratio coatings. They successfully synthesized bismuth-antimony coatings with various atomic ratios and achieved solid solutions with desirable thermoelectric properties after annealing. Molecular dynamics simulations further revealed the plastic deformation and fracture mechanisms during coating consolidation.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Engineering, Chemical

A molecular dynamics survey study of impact-induced amorphization in yttria nanoparticles

Aidan H. Moyers et al.

Summary: In this study, the impact of a single yttria nanoparticle on a yttria substrate was investigated using molecular dynamics simulations. The results showed that impacts led to extensive disordering of the crystal lattice without approaching the melting temperature, resulting in an amorphous microstructure and a deformation mechanism of amorphization-facilitated viscous flow.

JOURNAL OF AEROSOL SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic simulation and interatomic potential comparison in α-Al2O3: lattice, surface and extended-defects properties

Qinqin Xu et al.

Summary: In this study, the transferability of various interatomic potentials for aluminum oxide was investigated, with a focus on the material properties relevant to nanomechanical applications such as lattice properties, surface and stacking fault energies, and dislocation modeling. Simulation results were compared with DFT simulations and experimental data from the literature.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Materials Science, Coatings & Films

Features of ceramic nanoparticle deformation in aerosol deposition explored by molecular dynamics simulation

Bahman Daneshian et al.

Summary: The deformation and bonding of ceramic particles in aerosol deposition (AD) were studied, showing the existence of dislocation-based plasticity within a certain velocity range that coincides with the bonding velocity range in AD. Simulation results and analytical models provide a deposition window for AD.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales

Aidan P. Thompson et al.

Summary: LAMMPS, a classical molecular dynamics simulator released as an open source code in 2004, has gained popularity for its wide variety of particle interaction models, platform compatibility, and user control over simulation details. With contributions from numerous developers, it has grown from 50,000 lines of code to a million today, showcasing new capabilities like dynamic load balancing and quantum-accuracy machine learning interatomic potentials.

COMPUTER PHYSICS COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Thermal energy evolution and mechanical deformation of monocrystalline yttria-stabilized zirconia nanoparticles in aerosol deposition processes

Guanyu Song et al.

Summary: Aerosol deposition (AD) is a coating process in which aerosol particles are impacted on a target substrate. This study compared the effects of cold impact (high translational kinetic energy, low thermal energy) and thermal impact (low translational kinetic energy, high thermal energy) on YSZ nanoparticles using molecular dynamics simulations. It was found that in cold impact, temperature gradients and plastic deformation occurred in the nanoparticles, while in thermal impact, the temperature remained uniform and plastic deformation was reduced.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Coatings & Films

Impact Behavior for Successful Particle-Particle Bonding in Vacuum Kinetic Spraying

Hansol Kwon et al.

Summary: This study investigates the impact behavior of ceramic particles in vacuum kinetic spray for successful coating build-up. The results show a critical impact velocity for successive coating build-up to be possible, indicating particle-particle bonding can be achieved through sufficient kinetic energy. Suggested critical velocity values for deposition of Al(2)O(3) and SiO(2) in VKS are 400 and 300 m/s, respectively.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Deformation anisotropy of nano-scratching on C-plane of sapphire: A molecular dynamics study and experiment

Jiaming Lin et al.

Summary: The study investigates the influence of anisotropy on the scratching behavior of sapphire, revealing the significant impact of prismatic slip on surface morphology and stress distribution, as well as providing evidence for crack nucleation conditions. Additionally, it shows differences in lateral flow and subsurface damage layer thickness along different scratching directions parallel to the A-plane.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Atomistic study of metallurgical bonding upon the high velocity impact of fcc core-shell particles

L. M. Pereira et al.

Summary: By conducting large scale molecular dynamics simulations, it was found that the breakage of the brittle shell during particle impact led to metal-to-metal contact with the substrate, forming metallic bonds. Particle adhesion required the formation of a minimum amount of metallic bonds, and failure to meet this condition resulted in particle rebounding. Additionally, higher impact velocities resulted in more visible particle deformation and rupture of metallic bonds, ultimately affecting the overall rebounding velocity.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Al2O3 coated glass by aerosol deposition with excellent mechanical properties for mobile electronic displays

Hak Ki Yu et al.

Summary: By depositing Al2O3 thin film on Gorilla Glass using an aerosol deposition method, the mechanical properties of the cover glass for mobile electronic devices can be greatly improved. The Al2O3 film exhibits high light transmittance, increased bending strength, and higher hardness compared to Gorilla Glass, making it suitable for use in various display products.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Molecular simulation of high-velocity deposition of titanium dioxide nanoparticles on titanium

Hesamodin Jami et al.

Summary: Aerosol deposition method is a new room temperature coating technique that offers advantages compared to conventional methods. Molecular dynamics simulations are used to optimize material and process parameters, revealing the underlying physical processes involved in the formation and bonding of ceramic films. The simulations show high energy impact leading to unusual elastic-plastic deformation of ceramic nanoparticles and bonding mechanisms at the atomic scale.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Coatings & Films

A Self-Consistent Scheme for Understanding Particle Impact and Adhesion in the Aerosol Deposition Process

Robert Saunders et al.

Summary: By combining CFD simulation, FE modeling, and experimental observation, a self-consistent numerical and experimental understanding of particle flight, impact, and adhesion in the AD process can be achieved to optimize deposition efficiency.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Coatings & Films

Size Effects of Brittle Particles in Aerosol Deposition-Molecular Dynamics Simulation

Bahman Daneshian et al.

Summary: The impact behavior of ceramic particles in aerosol deposition is influenced by particle sizes, with particles of 25-75 nm exhibiting three different impact behaviors and larger particles not exhibiting bonding behavior. The bonding of particles to the substrate is caused by localized inelastic deformation and shear localization. Heat diffusion at small scales depends on particle size, with larger particles generating localized heat which supports deformation and the formation of dense layers in aerosol deposition.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Atomic-scale mechanism of rhombohedral twinning in sapphire

Eita Tochigi et al.

Summary: The dynamic twinning behavior dominated by atomic shuffling in sapphire has been reported in this study. The propagation and annihilation of twins are shown to be mediated by migration of step structures on the matrix/twin interfaces, driven by cooperative motions of a group of five atoms with relatively few recombination of Al-O bonds. These findings suggest that atomic shuffling associated with twinning is determined by a collective property of a group of several atoms.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Crystal orientation and grain boundary effects on plastic deformation of FCC particles under high velocity impacts

S. Rahmati et al.

Summary: The study used molecular dynamic simulations to investigate the effects of material plastic behavior, with a focus on grain orientation, on plastic deformation. Various deformation behaviors and microstructural evolutions were observed in different crystal structure particle models.

MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation of copper particles upon impact: A molecular dynamics study of cold spray

S. Rahmati et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Coatings & Films

Ultrafast thermomechanical effects in aerosol deposition of hydroxyapatite nanoparticles on a titanium substrate

Hesamodin Jami et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Ceramics

Pulsed laser deposited alumina thin films

Remi Boidin et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Shock-induced plasticity and fragmentation phenomena during alumina deposition in the vacuum kinetic spraying process

Hyungkwon Park et al.

SCRIPTA MATERIALIA (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Dislocation interactions with grain boundaries

Josh Kacher et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Influence of Carrier Gas Composition on the Stress of Al2O3 Coatings Prepared by the Aerosol Deposition Method

Michael Schubert et al.

MATERIALS (2014)

Add to Collection

Article Electrochemistry

Corrosion Protection Performance of YSZ Coating on AA7075 Aluminum Alloy Prepared by Aerosol Deposition

Hyun Sam Ryu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Materials Science, Ceramics

Effects of interlayer roughness on deposition rate and morphology of aerosol-deposited Al2O3 thick films

Chang-Wan Kim et al.

CERAMICS INTERNATIONAL (2012)

Add to Collection

Article Materials Science, Coatings & Films

Effect of stand-off distance for cold gas spraying of fine ceramic particles (<5 μm) under low vacuum and room temperature using nano-particle deposition system (NPDS)

Doo-Man Chun et al.

SURFACE & COATINGS TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Coatings & Films

Substrate hardness dependency on properties of Al2O3 thick films grown by aerosol deposition

Dong-Won Lee et al.

SURFACE & COATINGS TECHNOLOGY (2012)

Add to Collection

Article Multidisciplinary Sciences

Deformation-induced localized solid-state amorphization in nanocrystalline nickel

Shuang Han et al.

SCIENTIFIC REPORTS (2012)

Add to Collection

Article Materials Science, Ceramics

Growth Process of α-Al2O3 Ceramic Films on Metal Substrates Fabricated at Room Temperature by Aerosol Deposition

Dong-Won Lee et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

Add to Collection

Article Physics, Applied

Deformation mechanisms and damage in α-alumina under hypervelocity impact loading

Cheng Zhang et al.

JOURNAL OF APPLIED PHYSICS (2008)

Add to Collection

Article Physics, Applied

Interaction potentials for alumina and molecular dynamics simulations of amorphous and liquid alumina

Priya Vashishta et al.

JOURNAL OF APPLIED PHYSICS (2008)

Add to Collection

Article Materials Science, Coatings & Films

Room temperature impact consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices

Jun Akedo

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)

Add to Collection

Article Physics, Applied

Hypervelocity impact induced deformation modes in α-alumina

Cheng Zhang et al.

APPLIED PHYSICS LETTERS (2007)

Add to Collection

Article Materials Science, Ceramics

Aerosol deposition for post-LTCC

Yoshihiko Imanaka et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Add to Collection

Article Materials Science, Ceramics

Aerosol deposition of ceramic thick films at room temperature: Densification mechanism of ceramic layers

Jun Akedo

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Crystallography

Substrate heating effects on hardness of an α-Al2O3 thick film formedby aerosol deposition method

Maxim Lebedev et al.

JOURNAL OF CRYSTAL GROWTH (2005)

Add to Collection

Article Materials Science, Ceramics

Molecular dynamics simulations of basal and pyramidal system edge dislocations in sapphire

CT Bodur et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)

Add to Collection

Article Chemistry, Physical

Crystal structure of a high-pressure/high-temperature phase of alumina by in situ X-ray diffraction

JF Lin et al.

NATURE MATERIALS (2004)

Add to Collection

Article Geosciences, Multidisciplinary

High-pressure phase transformation of corundum (α-Al2O3) observed under shock compression

T Mashimo et al.

GEOPHYSICAL RESEARCH LETTERS (2000)

Add to Collection

Article Materials Science, Coatings & Films

Simple self-selective method of velocity measurement for particles in impact-based deposition

M Lebedev et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.