☆ 4.7 Article

Construction of compound interface in SiCf/mullite ceramic-matrix composites for enhanced mechanical and microwave absorbing performance

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Condensed Matter

The D- and G-branches associated with the Raman spectrum of thin-film carbon

Kathrin Schmidt et al.

Summary: For the Raman spectrum of thin-film carbon, the concept of D- and G-branches is introduced, which are related to the D- and G-peaks, respectively. This study finds that the D-branch shoulder and onset exhibit a fair amount of dispersion across the thin-film carbon genome, while the G-branch shoulder and onset are relatively uniform. The variations in the D-branch and G-branch shoulders and onsets within the thin-film carbon groupings identified by Ferrari and Robertson (2000) are explored, suggesting a potential need for revision of these groupings.

SOLID STATE COMMUNICATIONS (2023)

Add to Collection

Article Engineering, Chemical

Construction of Co2NiO4@MnCo2O4.5 nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption

Yi Zhang et al.

Summary: In this study, Co2NiO4@MnCo2O4.5 nanoparticles were synthesized with abundant hetero-interfaces and multiple magneto-electric loss mechanisms. The excess 0.5 oxygen atoms in MnCo2O4.5 enhanced electrical conductivity. Nanoneedle clusters facilitated multiple reflections and absorption of EMW, accompanied by heterogeneous interfaces to improve dielectric loss. The obtained composites showed excellent EMW absorption performance with low reflection loss and wide effective absorption bandwidth, as well as significant radar attenuation properties.

PARTICUOLOGY (2023)

Add to Collection

Article Materials Science, Ceramics

Microwave absorbing property of gelcasting SiC-Si3N4 ceramics with hierarchical pore structures

Huihui Zhang et al.

Summary: This study reports the X-band microwave absorbing properties of gelcasted SiC-Si3N4 ceramics with different hierarchical pore structures for the first time. The effects of pore structures, sample thickness, and temperature on the complex permittivity and microwave absorption performance of SiC-Si3N4 ceramics were systematically investigated. The results indicate that the introduction of appropriate hierarchical pore structure improves the absorbing performance of the material.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of SiC interphase on the mechanical, high-temperature dielectric and high-temperature microwave absorption properties of the SiCf/SiC/Mu composites

Hui Gao et al.

Summary: In this study, SiC interphase was prepared using a precursor infiltration-pyrolysis process. The effects of dipping concentrations on the mechanical, high-temperature dielectric, and microwave absorption properties of SiCf/SiC/Mu composites were investigated. It was found that the SiC interphase prepared with 5 wt% PCS/xylene solution had a smooth and homogeneous morphology and greatly improved the mechanical properties of the composite. The SiCf/SiC/Mu composites also showed enhanced dielectric properties and microwave absorption at high temperatures.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A concise review of the Raman spectra of carbon allotropes

Vibhor Thapliyal et al.

Summary: This article summarizes the progress in Raman spectroscopy of new carbon allotropes and nanomaterials, aiming to provide a useful field guide for researchers in identifying new or unusual pure carbon samples.

DIAMOND AND RELATED MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A review on electromagnetic microwave absorption properties: their materials and performance

Madiha Fathi Elmahaishi et al.

Summary: The elevated levels of electromagnetic radiation emitted by electronic instruments, communication devices, and information processing technologies have raised concerns, leading to efforts in developing unique nano-materials for enhancing the electromagnetic absorption properties of microwave-absorbing materials. This article discusses the basic theory of electromagnetic microwave absorption, highlights the materials and their performance, and elaborates on strategies to enhance the absorption properties. Metal-based composites show high efficiency in achieving desired magnetic and dielectric characteristics. The article also provides a comprehensive review of microwave absorption materials, their mechanisms, and the properties of nanomaterials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Ceramics

Effects of fiber volume fraction on the densification and mechanical properties of unidirectional SiCf/SiC-matrix composites

Kazuya Shimoda et al.

Summary: Unidirectional SiCf/SiC-matrix composites with a pyrocarbon interface were prepared by hot-pressing SiC nano powder at high temperature (1900 degrees C) and pressure (20 MPa). The volume fraction of SiC reinforcing fiber significantly affected densification and mechanical properties, with improvements in mechanical properties observed with an increase in fiber volume fraction up to a certain level, beyond which the ultimate strength degraded due to open porosity and fiber damage.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Mechanical, thermal, and dielectric properties of SiCf/SiC composites reinforced with electrospun SiC fibers by PIP

Pengpeng Yu et al.

Summary: SiC fibers reinforced SiCf/SiC composites were prepared by electrospinning with varied pyrolysis temperatures to investigate their microstructures, mechanical, thermal, and dielectric properties. Composites prepared at 1300 degrees Celsius exhibited good thermal conductivity and electromagnetic shielding effectiveness, showing promise for structural components and EMI shielding applications in the future.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Simultaneously improving mechanical and microwave absorption properties of a novel SiCf/SiOC & mullite hybrid ceramic matrix composite

Zhaowen Ren et al.

Summary: The effects of different content of PSO solution on the morphologies, flexure strength, and reflection loss values of SiCf/hybrid matrix composites were studied, showing changes in performance with increasing PSO solution content.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Engineering, Mechanical

Mechanical and tribological properties of h-BN/ZrO2/SiC solid-lubricating ceramic composites

Juanjuan Chen et al.

Summary: h-BN/ZrO2/SiC solid-lubricating ceramic composites were prepared by spark plasma sintering method. The mechanical properties declined with increasing h-BN content, while the friction coefficient decreased at both room temperature and 900 degrees C. The tribological properties were found to improve, but the main wear mode was considered to be surface brittle fracture, especially at 900 degrees C for composites with higher h-BN content.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C

Lian-Yi Wang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Composites

Interfacial interactions and interfacial polarization in polyazomethine/MWCNTs nanocomposites

Sergei Bronnikov et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Physical

Electromagnetic microwave absorption theory and recent achievements in microwave absorbers

Xiaojun Zeng et al.

CARBON (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High temperature oxidation behaviors of bulk SiC with low partial pressures of air and water vapor in argon

Yi Je Cho et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Composites

Dependency of tunable electromagnetic wave absorption performance on morphology-controlled 3D porous carbon fabricated by biomass

Xinfeng Zhou et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of preparation conditions on mechanical, dielectric and microwave absorption properties of SiC fiber/mullite matrix composite

Hui Gao et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Fabrication of SiCf/SiC-mullite composite with improved pretreatment condition via precursor infiltration-sintering combined with infiltration-pyrolysis process

Hui Gao et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Mechanical and dielectric properties of SiCf/BN/SiBCN composites via different synthesis technologies

Chaokun Song et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Continuous SiCN Fibers with Interfacial SiCxNy Phase as Structural Materials for Electromagnetic Absorbing Applications

Xin Long et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Improved mechanical and microwave absorption properties of SiC fiber/mullite matrix composite using hybrid SiC/Ti3SiC2 fillers

Hui Gao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and electromagnetic wave absorption properties of Cf-Si3N4 ceramics with PyC/SiC interphases

Wei Zhou et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of h-BN as an additive on oxidation behaviour and kinetic characteristics of carbon/carbon composites

Zi-bo Niu et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Ceramics

Depositing CNTs on the interface and surface of C/PyC/SiCs for tunable mechanical and electromagnetic properties

Hui Mei et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

A novel vibration-assisted slurry impregnation to fabricate Cf/ZrB2-SiC composite with enhanced mechanical properties

Ping Hu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Enhanced microwave absorbance of oxidized SiCf /AlPO4 composites via the formation of a carbon layer on the SiC fibre surface

Feng Wan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

KD-S SiCf/SiC composites with BN interface fabricated by polymer infiltration and pyrolysis process

Honglei Wang et al.

JOURNAL OF ADVANCED CERAMICS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Fibre-reinforced multifunctional SiC matrix composite materials

X. W. Yin et al.

INTERNATIONAL MATERIALS REVIEWS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Micro-mechanical properties and interfacial engineering of SiC fiber reinforced sol-gel fabricated mullite matrix composites

S. Han et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Controllable Fabricating Dielectric-Dielectric SiC@C Core-Shell Nanowires for High-Performance Electromagnetic Wave Attenuation

Caiyun Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Interfacial interactions and synergistic effect of CoNi nanocrystals and nitrogen-doped graphene in a composite microwave absorber

Juan Feng et al.

CARBON (2016)

Add to Collection

Article Chemistry, Physical

Electromagnetic interference shielding and dielectric properties of SiCf/SiC composites containing pyrolytic carbon interphase

Donghai Ding et al.

CARBON (2013)

Add to Collection

Article Materials Science, Ceramics

Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process

Haitao Liu et al.

CERAMICS INTERNATIONAL (2010)

Add to Collection

Article Chemistry, Physical

Dielectric properties of the SiC fiber-reinforced SiC matrix composites with the CVD SiC interphases

Haitao Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Materials Science, Composites

Ceramic fiber composites: Experimental analysis and modeling of mechanical properties

Dietmar Koch et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Ceramics

Microstructural features of the ZrO2 interfacial coatings on SiC fibers before and after exposition to air at high temperatures

N. I. Baklanova et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of SiC/SiC composite with magnesium-silicon oxide interphase

N. Igawa et al.

JOURNAL OF NUCLEAR MATERIALS (2007)

Add to Collection

Article Materials Science, Ceramics

Raman study of yttria-stabilized zirconia interfacial coatings on Nicalon™ fiber

N. I. Baklanova et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Add to Collection

Article Chemistry, Physical

Studying disorder in graphite-based systems by Raman spectroscopy

M. A. Pimenta et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2007)

Add to Collection

Article Materials Science, Ceramics

Monazite coatings on SiC fibers I: Fiber strength and thermal stability

E. E. Boakye et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of advanced SiC fiber/F-CVI SiC matrix composites with SiC/C multi-layer interphase

T Taguchi et al.

JOURNAL OF NUCLEAR MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.