☆ 4.6 Article

High-Efficiency Degradation of Formaldehyde and Bioelectricity Generation by Microbial Fuel Cell

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Allergy

Trends in formaldehyde and formaldehyde-releaser contact allergies as compared with market exposure in Thailand

Waranya Boonchai et al.

Summary: This study aimed to determine the prevalence and trends of contact allergies to formaldehyde and formaldehyde releasers (FRs) in Thailand, as well as analyze the frequency of formaldehyde and FRs mentioned on product labels. The results showed that while contact allergy trends were decreasing, the proportion of products containing FRs remained high.

CONTACT DERMATITIS (2023)

Add to Collection

Article Chemistry, Analytical

Evaluation of a Yeast-Polypyrrole Biocomposite Used in Microbial Fuel Cells

Antanas Zinovicius et al.

Summary: Electrically conductive polymers have potential applications in charge transfer from living cells to electrochemical biosensors and biofuel cells. Modification of living cells by polypyrrole (PPy) reduces cell lifespan, burdens replication, and diminishes renewability. The study evaluated the viability and morphology of non-modified, inactivated, and PPy-modified yeast cells, showing a reduction in cell size, increased roughness, and the formation of polymer clusters with higher pyrrole concentrations. A microbial fuel cell (MFC) designed with yeast modified by a 0.05 M pyrrole solution generated 8.32 mW/m(2) more power than the MFC based on non-modified yeast. However, higher concentrations of PPy caused cytotoxic effects and reduced charge transfer efficiency.

SENSORS (2022)

Add to Collection

Article Agricultural Engineering

Recovery of microbial fuel cells with high COD molasses wastewater and analysis of the microbial community

Juntao Yang et al.

Summary: The double-chamber microbial fuel cell shows effective treatment of molasses wastewater, but performance declines with increasing influent concentration due to accumulation of volatile fatty acids (VFAs) and low pH. However, the MFC exhibits strong self-recovery capability, able to regain high efficiency after a certain period of time.

BIOMASS & BIOENERGY (2022)

Add to Collection

Article Chemistry, Physical

Three-dimensional ZIF-67 attached lamellar Ti3AlC2 combined with ZnAl-LDH as cathode catalyst for enhancing oxygen reduction reaction of microbial fuel cells

Junfeng Chen et al.

Summary: In this study, a simple hydrothermal method was used to prepare the cathode catalyst of microbial fuel cells. The composite material of ZIF-67 attached to the lamellar Ti3AlC2/ZnAl-LDH showed significant peaks and had a relatively uniform distribution of elements on its surface. The ZIF-67@Ti3AlC2/ZnAl-LDH-MFC exhibited a higher maximum voltage and power density compared to other MFCs, indicating improved performance. The combination of Ti3AlC2 with ZnAl-LDH and the addition of ZIF-67 enhanced the reaction center and activity of the composite material, leading to better oxygen reduction reaction and MFC performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Ameliorating substance accessibility for microorganisms to amplify toluene degradation and power generation of microbial fuel cell by using activated carbon anode

Fangcheng Su et al.

Summary: The study found that assembling activated carbon in the anode chamber of a microbial fuel cell can improve the performance of pollutant degradation. The adsorption of hydrophobic organic compounds by activated carbon facilitates biodegradation and increases power generation efficiency.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Materials Science, Paper & Wood

In situ growth of MnO2 on pDA-templated cotton fabric for degradation of formaldehyde

Yali Zhang et al.

Summary: This study developed a method to degrade formaldehyde in interior decoration by in situ growing manganese dioxide nanoparticles (MnO2 NPs) on cotton fabrics using polydopamine as a template. The results showed that the developed cotton/pDA/MnO2 fabrics exhibited good stability and could remove 100% of formaldehyde within 20 minutes after three cycles. The development of MnO2 NPs coated fabrics provides a new strategy for the degradation of formaldehyde in interior decoration.

CELLULOSE (2022)

Add to Collection

Article Engineering, Environmental

Architecting hierarchal Zn3V2O8/P-rGO nanostructure: Electrochemical determination of anti-viral drug azithromycin in biological samples using SPCE

Tata Sanjay Kanna Sharma et al.

Summary: In this study, a sensitive and selective method for the determination of azithromycin (AZY) was developed using a Zn3V2O8/P-rGO nanocomposite and a flexible screen-printed carbon electrode (SPCE). The prepared electrode showed a low limit of detection, high sensitivity, and specific selectivity and stability in real samples.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Electrochemistry

Polyaniline-MXene-coated carbon cloth as an anode for microbial fuel cells

Demin Jiang et al.

Summary: In this study, the PANI-MXene modified anode was used to enhance the EET efficiency in microbial fuel cells, resulting in a high power density. This provides a meaningful approach for decorating anodes in MFCs using binder-free modifiers.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2022)

Add to Collection

Article Electrochemistry

Controlled synthesis of carbon nanonetwork wrapped graphite felt electrodes for high-performance vanadium redox flow battery

Yanrong Lv et al.

Summary: A nitrogen-doped carbon nanonetwork wrapped dual-function electrode is successfully fabricated using a simple electrodeposition method. This electrode increases the specific surface area of the graphite felt electrode, improves connectivity, and reduces resistance. The prepared electrode shows improved energy efficiency and discharge capacity, with stability during charging and discharging.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Combined TPR, XRD, and FTIR studies on the reduction behavior of Co3O4

Abdallah I. M. Rabee et al.

Summary: This study investigated the chemical composition, structure, thermal stability, topo-chemical interactivity, and reduction behavior of cobalt oxides (Co3O4, CoO, and Co2O3). The results showed that Co3O4 had a stable crystalline structure and underwent deoxygenation and oxygenation processes in different atmospheres. The reduction of Co3O4 involved five events, including the removal of surface oxygen species and the formation of CoO. The study also found that reduction variables had a significant impact on the temperature range and rate of reduction events.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Chemistry, Applied

Modification of the anodes using MoS2 nanoflowers for improving microbial fuel cells performance

Xiaoge Lou et al.

Summary: Graphene-like molybdenum disulfide (GL-MoS2) nanoflowers were successfully synthesized via a simple hydrothermal method and used to modify MFC anodes to enhance power density, showing promise as cost-effective materials for anode modification.

CATALYSIS TODAY (2021)

Add to Collection

Article Engineering, Environmental

Highly efficient photocatalytic hydrogen evolution and simultaneous formaldehyde degradation over Z-scheme ZnIn2S4-NiO/BiVO4 hierarchical heterojunction under visible light irradiation

Ruijie Yang et al.

Summary: In this study, a highly efficient Z-scheme ZnIn2S4-NiO/BiVO4 photocatalytic system was successfully constructed and the photocatalytic reaction mechanism and pathway of hydrogen (H2) evolution and formaldehyde (HCHO) degradation were uncovered. The effects of oxygen (O2) and pH on the photocatalytic activity were explored, showing that they are crucial for H2 production and HCHO degradation. The results provide insights for optimizing simultaneous photocatalytic H2 production and HCHO degradation.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Development of an MFC-powered BEF system with novel Fe-Mn-Mg/CF composite cathode to degrade refractory pollutants

Weiye Wang et al.

Summary: A novel cathode Fe-Mn-Mg/CF was developed to improve the electrochemical and catalytic properties of the MFC-powered BEF system, increasing electricity generation efficiency and pollutant degradation. The integration of Fe, Mn with Mg promoted the in-situ generation of H2O2 and active radicals, resulting in the highest catalytic performance for degrading refractory pollutants.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Electrochemistry

Bio-functional metal organic framework composite as bioanode for enhanced electricity generation by a microbial fuel cell

Haitao Xu et al.

Summary: The NH2-MIL-53(Fe) anode in microbial fuel cells (MFCs) leads to a significant increase in energy output due to its excellent electron transfer properties and bacterial aggregating behavior. The study elucidates the synergistic effects of MOF structure and components of NH2-MIL-53(Fe) on MFC performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Charge Transfer and Biocompatibility Aspects in Conducting Polymer-Based Enzymatic Biosensors and Biofuel Cells

Simonas Ramanavicius et al.

Summary: This review discusses the importance of charge transfer in biosensors and biofuel cells, highlighting the application of nanomaterials and conducting polymers to facilitate charge transfer. The mechanisms of both indirect and direct charge transfer, as well as biocompatibility aspects of conducting polymers, are addressed in the review.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Physical

ZIF-8@ZIF-67-derived ZnCo2O4 @nitrogen-doped carbon/carbon nanotubes wrapped by a carbon layer: a stable oxygen reduction catalyst with a competitive strength in acid media

J. H. Li et al.

Summary: Utilizing ZIF-derived materials to encapsulate ZnCo2O4, a highly active and methanol tolerant ORR catalyst was successfully developed. It exhibits a high onset potential and stability, outperforming commercial Pt/C catalyst, providing a new approach for designing stable ORR catalysts in acidic media.

MATERIALS TODAY ENERGY (2021)

Add to Collection

Article Microbiology

Comprehensive Comparative Genomics and Phenotyping of Methylobacterium Species

Ola Alessa et al.

Summary: This study used a comprehensive comparative genomics approach to reveal the phylogenetic relationships among PPFMs and explain the genotypic differences that confer their different phenotypes. The research found that methylotrophy, nitrate utilization, and anoxygenic photosynthesis are distinguishing features of PPFMs from other members of Methylobacteriaceae. Additionally, some strains lack MxaF-type methanol dehydrogenase but possess XoxF-type MDH enabling growth on methanol in the presence of lanthanum.

FRONTIERS IN MICROBIOLOGY (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

ZnO-Co3O4/N-C Cage Derived from the Hollow Zn/Co ZIF for Enhanced Degradation of Bisphenol A with Persulfate

Lei Bai et al.

Summary: The hollow ZIF-8/ZIF-67 composite was successfully prepared using zeolitic imidazolate framework (ZIF)-67 microcrystals as a precursor, which was then transformed into ZnO-Co3O4/N-C cage by thermal treatment for the oxidative degradation of bisphenol A. The enhanced catalytic performance of ZnO-Co3O4/N-C cage was attributed to the small, highly dispersed cobalt oxide particles, the hollow structure facilitating molecular transportation, and the synergistic effect between cobalt oxide and nitrogen-doped carbon in the composite.

INORGANIC CHEMISTRY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Formaldehyde in multicomponent reactions

Changhui Liu et al.

Summary: Formaldehyde plays a significant role in organic synthesis as a C1 building block and key feedstock in various industries. Recent advances have shown that utilizing it in multicomponent reactions (MCRs) can reduce waste production, costs, and labor consumption, making the process more sustainable while maintaining excellent reactivity and flexibility.

GREEN CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Polypyrrole-immobilized organo iridium for formaldehyde efficient decomposition in water and air

Yangbin Shen et al.

APPLIED CATALYSIS A-GENERAL (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Purification and characterization of formaldehyde dismutases of Methylobacterium sp. FD1

Seiji Imoto et al.

BIOSCIENCE BIOTECHNOLOGY AND BIOCHEMISTRY (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Bacterial response to formaldehyde in an MFC toxicity sensor

Hongbin Lu et al.

ENZYME AND MICROBIAL TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Combined AOPs for Formaldehyde Degradation Using Heterogeneous Nanostructured Catalysts

Renato Bonora et al.

NANOMATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Efficient degradation of indole by microbial fuel cell based Fe2O3-polyaniline-dopamine hybrid composite modified carbon felt anode

Minjie Jian et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Microbiology

Lanthanide-Dependent Methanol and Formaldehyde Oxidation inMethylobacterium aquaticumStrain 22A

Patcha Yanpirat et al.

MICROORGANISMS (2020)

Add to Collection

Article Polymer Science

Simultaneous improvement of mechanical and conductive properties of poly(amide-imide) composites using carbon nano-materials with different morphologies

Yawen Fang et al.

JOURNAL OF POLYMER ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Catalytic oxidation degradation of formaldehyde on FeN3-graphene surface: A DFT study

Zhijian Liu et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Review Biochemistry & Molecular Biology

Progress and Insights in the Application of MXenes as New 2D Nano-Materials Suitable for Biosensors and Biofuel Cell Design

Simonas Ramanavicius et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Electricity generation and storage in microbial fuel cells with porous polypyrrole-base composite modified carbon brush anodes

Yuyang Wang et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Suspended anode-type microbial fuel cells for enhanced electricity generation

Yiyang Liu et al.

RSC ADVANCES (2020)

Add to Collection

Article Polymer Science

Facile Preparation of Highly Conductive Poly(amide-imide) Composite Films beyond 1000 S m-1 through Ternary Blend Strategy

Yanbin Wang et al.

POLYMERS (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Gaseous Formaldehyde Degrading by Methylobacterium sp. XJLW

Yunhai Shao et al.

APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Photocatalytic Degradation Kinetics of Gaseous Formaldehyde Flow Using TiO2 Nanowires

Hailong Dou et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Biophysics

A screen-printed paper microbial fuel cell biosensor for detection of toxic compounds in water

Jon Chouler et al.

BIOSENSORS & BIOELECTRONICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Biodegradation of formaldehyde using Bacillus subtilis in batch process

Panchanathan Ezhilkumar et al.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2017)

Add to Collection

Article Biophysics

Enhanced dopamine detection sensitivity by PEDOT/graphene oxide coating on in vivo carbon fiber electrodes

I. Mitch Taylor et al.

BIOSENSORS & BIOELECTRONICS (2017)

Add to Collection

Article Agricultural Engineering

Synergetic effect of conductive polymer poly(3,4-ethylenedioxythiophene) with different structural configuration of anode for microbial fuel cell application

Yee Li Kang et al.

BIORESOURCE TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Physical

Poly (3,4-ethylenedioxythiophene) promotes direct electron transfer at the interface between Shewanella loihica and the anode in a microbial fuel cell

Xing Liu et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Growth mechanisms, morphology, and electroactivity of PEDOT layers produced by electrochemical routes in aqueous medium

Emanuela Tamburri et al.

SYNTHETIC METALS (2009)

Add to Collection

Article Biotechnology & Applied Microbiology

Isolation of bacteria able to metabolize high concentrations of formaldehyde

S Mirdamadi et al.

WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.