☆ 4.7 Article

Enhanced energy-storage properties in Zr4+-modified (Bi0.4Ba0.2K0.2Na0.2)TiO3 high-entropy ceramics

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Design and preparation of lead-free (Bi0.4Na0.2K0.2Ba0.2)TiO3-Sr(Mg1/3Nb2/3)O3 high-entropy relaxor ceramics for dielectric energy storage

Bo Yan et al.

Summary: High-entropy perovskite oxides in the (Bi0.4Na0.2K0.2Ba0.2)TiO3- Sr(Mg1/3Nb2/3)O3 system were prepared and studied for dielectric energy storage. The effects of composition and sintering temperature on energy storage performance were investigated. The obtained ceramic showed a recoverable energy storage density of 3.37 J/cm3 and an energy storage efficiency of 80% at 310 kV/cm, providing a new idea for developing high-entropy dielectric energy storage ceramics.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Materials Science, Ceramics

Design and investigate the electrical properties of Pb (Mg0.2Zn0.2Nb0.2Ta0.2W0.2)O3-PbTiO3 high-entropy ferroelectric ceramics

Xiang Li et al.

Summary: In this study, a strategy of introducing morphotropic phase boundaries to obtain ferroelectricity in high-entropy perovskite oxides is proposed. The feasibility of the concept is demonstrated using a model system.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Engineering, Environmental

High energy density, temperature stable lead-free ceramics by introducing high entropy perovskite oxide

Shiyu Zhou et al.

Summary: This study successfully introduced the high entropy compound BZMASZ into the BT-NBT matrix to improve the energy storage performance of ceramics. The 0.1 BZMASZ modified ceramics exhibited excellent energy density, conversion efficiency, and temperature stability after phase transition and enhancement of relaxor behavior.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High-entropy (Ca0.2Sr0.2Ba0.2La0.2Pb0.2)TiO3 perovskite ceramics with A-site short-range disorder for thermoelectric applications

Ping Zhang et al.

Summary: Novel high-entropy CSBLP perovskite-type ceramics were successfully prepared by solid-state reaction method, showing a homogeneous distribution of multicomponent cations and nanoscale grains in the microstructure. The ceramic exhibited enhanced Seebeck coefficient and low thermal conductivity when annealed at high temperature, demonstrating the potential of high-entropy composition design in improving thermoelectric oxide performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

High Entropy Oxide Relaxor Ferroelectrics

Yogesh Sharma et al.

Summary: This study demonstrates the stabilization of relaxor ferroelectric materials that do not rely on a single narrow phase transition region at the strong limit of compositional complexity in perovskite structure. Ba(5B)O films, synthesized using entropy-assisted synthesis methods, exhibit high levels of configurational disorder that influence dielectric relaxation, phase transitions, nanopolar domain formation, and Curie temperature. The ability to stabilize these highly disordered single-phase perovskites offers possibilities for designing high-performance relaxor ferroelectric materials.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Materials Science, Ceramics

Realizing excellent energy storage properties in Na0.5Bi0.5TiO3-based lead-free relaxor ferroelectrics

Xu Li et al.

Summary: In this study, the enhancement of energy storage properties in lead-free relaxor ferroelectrics was achieved through component regulation. The materials exhibited high recoverable energy storage density, large energy storage efficiency, and a wide operating temperature range. The excellent energy storage properties were mainly attributed to the suppression of early polarization saturation and the improvement of dielectric breakdown strength.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Multidisciplinary Sciences

Giant energy-storage density with ultrahigh efficiency in lead-free relaxors via high-entropy design

Liang Chen et al.

Summary: This study proposes a high-entropy strategy to design local polymorphic distortion, resulting in ultra-small polar nanoregions, enhanced breakdown electric field, and delayed polarization saturation. A giant W-rec of around 10.06 J cm(-3) and an ultrahigh eta of around 90.8% are achieved in lead-free relaxor ferroelectrics, showing breakthrough progress in energy storage performance for lead-free bulk ceramics. This work opens up an effective avenue for designing dielectric materials with ultrahigh comprehensive energy storage performance.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Ceramics

Enhanced electrical properties of (Bi0.2Na0.2Ba0.2Ca0.2Sr0.2)TiO3 high-entropy ceramics prepared by hydrothermal method

Wuyou Sun et al.

Summary: In this study, (Bi0.2Na0.2Ba0.2Ca0.2Sr0.2)TiO3 (BNBCST) high-entropy ceramics (HECs) were prepared using hydrothermal-synthesized powders. It was found that BNBCST exhibited great chemical homogeneity and a single tetragonal phase due to the chemical element disorder at the A site, leading to lattice distortion and enhanced dielectric relaxation and energy storage performance. The study highlights the potential of hydrothermal powder preparation in fabricating high-entropy ferroelectric ceramics, with BNBCST being a viable alternative for electrical energy storage applications.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Tunning the dielectric and energy storage properties of high entropy ceramics (Bi0.2Na0.2K0.2La0.2Sr0.2)(Ti1-xScx)O3 by Sc-doping at B-site in perovskite structure

Wentao Yang et al.

Summary: The effects of Sc-doping on the lattice structure, microstructural morphology, dielectric and energy-storage properties of (Bi0.2Na0.2K0.2La0.2Sr0.2)(Ti1-xScx)O-3 (BNKLST-xSc) high entropy ceramics were investigated. The results show that Sc-doping leads to lattice expansion and weakened bonding in TiO6 octahedron, reducing dielectric constant but enhancing dielectric relaxation. Additionally, BNKLST-0.2Sc exhibits ultra-high thermal stability and excellent energy storage properties.

JOURNAL OF ELECTROCERAMICS (2022)

Add to Collection

Article Materials Science, Ceramics

Enhanced moderate electric field dielectric energy storage performance in (Bi0.5Na0.5)TiO3-based lead-free ceramics

Bo Yan et al.

Summary: Lead-free relaxor ferroelectric ceramics have been prepared and characterized. The ceramic with the composition of 0.85BNKT-0.15SMN shows the best overall performance with high energy storage density and efficiency, as well as excellent temperature and frequency stability.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A simple and effective predictor to design novel fluorite-structured High Entropy Oxides (HEOs)

Luca Spiridigliozzi et al.

Summary: High-Entropy Oxides (HEOs) are a new class of ceramic materials that have attracted scientific attention due to their complexity and potential for design using entropy as a driving force. By studying Rare Earths-based oxides, researchers have found that the dispersion of cationic radii of elements in a system is critical for stabilizing single-phase HEOs in a fluorite-like structure.

ACTA MATERIALIA (2021)

Add to Collection

Article Engineering, Environmental

High capacitive performance at moderate operating field in (Bi0.5Na0.5) TiO3-based dielectric ceramics via synergistic effect of site engineering strategy

Yuqin Ding et al.

Summary: Through optimized design of relaxor ferroelectric ceramics, this research successfully achieves high energy storage density and efficiency under moderate electric field, with good stability and fatigue endurance.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Ceramics

High-entropy oxides based on valence combinations: design and practice

Lei Tang et al.

Summary: High-entropy oxides (HEOs) are a new class of materials with wide applications, and designing them requires consideration of geometric compatibility and electrical balance. Researchers have proposed a two-step strategy to systematically select constituent materials for making HEOs, successfully synthesizing single-phase cubic perovskites in multiple subsystems. This strategy is expected to be applicable to other oxide systems as well.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Temperature-stable Na0.5Bi0.5TiO3-based relaxor ceramics with high permittivity and large energy density under low electric fields

Guoliang Xue et al.

Summary: By substituting KTaO3 for Na0.5Bi0.5TiO3, the challenge of achieving simultaneous improvement of dielectric constant, energy density, and temperature stability in dielectric ceramics has been effectively addressed. The ceramic system demonstrated promising performance in various compositions, indicating its potential as a candidate material for temperature-stable dielectric and energy storage capacitors applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Ceramics

Thermal stability of dielectric and energy storage performances of Ca-substituted BNTZ ferroelectric ceramics

Yunyao Huang et al.

Summary: This study synthesized Ca-substituted BNTZ ferroelectric ceramics using a solid-state reaction technique, showing structural evolution by X-ray diffraction and revealing a pseudocubic structure with P4bm symmetry. The temperature-dependent dielectric properties exhibit a clear and broad peak, with improved thermal stability as x increases. Composition x=0.07 achieved a recoverable energy storage density of 2.79 J/cm(3) with an energy storage efficiency of 76%, demonstrating superior properties over other BNT-based systems. Introduction of ions without contributing to polarization enhances the thermal stability of dielectric and energy storage performances in BNT-based ceramics.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Remarkably enhanced energy-storage density and excellent thermal stability under low electric fields of (Na0.5Bi0.5)TiO3-based ceramics via composition optimization strategy

Zepeng Wang et al.

Summary: By employing a composition-optimization approach, this study successfully achieved high energy density and high thermal stability in dielectric ceramics, making it a promising candidate for applications in miniaturized equipment.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives

Ge Wang et al.

Summary: The importance of dielectric capacitors in high energy storage, specifically focusing on the development of traditional lead-free capacitors and dielectric ceramics for high-temperature applications. The paper discusses key factors to improve energy storage properties and emphasizes the need for new materials in high power/energy density capacitor applications in the future.

CHEMICAL REVIEWS (2021)

Add to Collection

Article Materials Science, Ceramics

Low-loss high entropy relaxor-like ferroelectrics with A-site disorder

Wei Xiong et al.

Summary: High entropy perovskites show great potential as relaxor-like ferroelectrics, with the ability to tune their properties for different applications while maintaining low loss and short relaxation times.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Realizing high comprehensive energy storage performances of BNT-based ceramics for application in pulse power capacitors

Fan Yang et al.

Summary: Lead-free ceramic capacitors play a crucial role in electrical energy storage devices due to their ultrafast charge/discharge rates and high power density. This study successfully prepared a series of relaxor ferroelectric ceramics with excellent comprehensive energy storage performances, achieving high recoverable energy density and superior efficiency simultaneously under specific compositions.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Review Materials Science, Ceramics

High-entropy ceramics: Present status, challenges, and a look forward

Huimin Xiang et al.

Summary: High-entropy ceramics are solid solutions of inorganic compounds with diverse crystal and electronic structures, providing large space for property tuning through band structure and phonon engineering. In addition to traditional strengthening, hardening, and low thermal conductivity, HECs exhibit new properties such as colossal dielectric constant and super ionic conductivity. Challenges in processing, characterization, and property predictions are highlighted, along with future directions for material exploration and in-depth characterization.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Domain Engineered Lead-Free Ceramics with Large Energy Storage Density and Ultra-High Efficiency under Low Electric Fields

Ruirui Kang et al.

Summary: Dielectric energy storage materials are gaining popularity for their potential advantages, but there is still a need to achieve high discharging energy density and efficiency under low electric fields. This study developed a new sodium bismuth titanate-based ceramic material using domain engineering strategy, which showed excellent energy storage performance at low electric fields.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Ceramics

High-entropy stoichiometric perovskite oxides based on valence combinations

Jinxu Ma et al.

Summary: The valence-combination strategy was used to design B-site substitution non-equimolar stoichiometric high-entropy perovskite oxides, with various valence combinations identified with maximum configurational entropy. Experimental synthesis on 8 valence combinations showed that single-phase HEPOs were obtained from 6 of them, indicating most HEPOs have ordered structures. The formation of single-phase HEPOs and ordered structures was discussed in terms of structural tolerance factor and valence-difference factor.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

A high-entropy perovskite cathode for solid oxide fuel cells

Quan Yang et al.

Summary: The high-entropy cathode HEP has shown outstanding electrochemical performance in SOFCs, indicating promising potential applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Ferroelectric properties of BaTiO3-BiScO3 weakly coupled relaxor energy-storage ceramics from first-principles calculations

Longwen Wu et al.

Summary: This study investigates the electronic and atomic properties of the BaTiO3-BiScO3 weakly coupled energy-storage ceramics through theoretical calculations and experimental methods, revealing that lattice volumes expand with increasing BS content, ferroelectric polarizations decrease, and hysteresis loops become slimmer. The large ionic displacement disorder of Ti/Sc atoms and strong orbital hybridization of Bi/Ti atoms with O atoms are identified as the origins of the weakly coupled relaxor behavior in the BT-BS ceramics.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Physical

ABO3 multiferroic perovskite materials for memristive memory and neuromorphic computing

Bai Sun et al.

Summary: ABO(3) multiferroic perovskite materials exhibit unique electron characteristics, making them promising candidates for multifunctional nanoelectronic devices. The memristive effect promotes data storage, information processing, and neuromorphic computing in various artificial intelligence applications. Approaches like ion doping, electrode selection, and interface modulation in these materials have shown potential for ultrahigh data storage, ultrafast information processing, and efficient neuromorphic computing.

NANOSCALE HORIZONS (2021)

Add to Collection

Review Chemistry, Physical

High-performance lead-free bulk ceramics for electrical energy storage applications: design strategies and challenges

Zetian Yang et al.

Summary: Dielectric capacitors are considered promising devices for storing electrical energy in pulsed power systems due to their fast charge/discharge rates and high power density. Extensive efforts have been made to develop high-performance dielectric materials, such as lead-free bulk ceramics, for energy storage applications. Design strategies and optimization of energy storage performance are crucial, while challenges and future prospects are also present.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Ceramics

Ultra-high energy storage performance under low electric fields in Na0.5Bi0.5TiO3-based relaxor ferroelectrics for pulse capacitor applications

Lei Zhang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Relaxor ferroelectric (Na0.5Bi0.5)0.4Sr0.6TiO3-based ceramics for energy storage application

Zhengyi Yang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Environmental

Novel Na0.5Bi0.5TiO3 based, lead-free energy storage ceramics with high power and energy density and excellent high-temperature stability

Lei Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Achieved ultrahigh energy storage properties and outstanding charge-discharge performances in (Na0.5Bi0.5)0.7Sr0.3TiO3-based ceramics by introducing a linear additive

Da Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Nanoscience & Nanotechnology

High-entropy ceramics

Corey Oses et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Dielectric and energy storage properties of flash-sintered high-entropy (Bi0.2Na0.2K0.2Ba0.2Ca0.2)TiO3 ceramic

Jia Liu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Tailoring high energy density with superior stability under low electric field in novel (Bi0.5Na0.5)TiO3-based relaxor ferroelectric ceramics

Xinyu Zhao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Review Engineering, Electrical & Electronic

High-energy storage performance of (1-x)[0.935(Bi0.5Na0.5)TiO3-0.065BaTiO(3)]-xBa(Zr0.3Ti0.7)O-3 ceramics with wide temperature range

Xuemin Fan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Materials Science, Ceramics

Significantly enhanced energy storage density in sodium bismuth titanate-based ferroelectrics under low electric fields

Jintao Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Entropy Perovskites: An Emergent Class of Oxide Thermoelectrics with Ultralow Thermal Conductivity

Ritwik Banerjee et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

High temperature lead-free BNT-based ceramics with stable energy storage and dielectric properties

Chaoqiong Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Enhanced energy-storage performance of (1-x)(0.72Bi0.5Na0.5TiO3-0.28Bi0.2Sr0.7▭ 0.1TiO3)-xLa ceramics

Qiang Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Perovskite lead-free dielectrics for energy storage applications

Letao Yang et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Grain size engineered lead-free ceramics with both large energy storage density and ultrahigh mechanical properties

Zetian Yang et al.

NANO ENERGY (2019)

Add to Collection

Article Physics, Applied

Dielectric properties and electrocaloric effect of high-entropy (Na0.2Bi0.2Ba0.2Sr0.2Ca0.2)TiO3 ceramic

Yongping Pu et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Entropy Oxides: Fundamental Aspects and Electrochemical Properties

Abhishek Sarkar et al.

ADVANCED MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Review of high entropy ceramics: design, synthesis, structure and properties

Rui-Zhi Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced energy storage properties in sodium bismuth titanate- based ceramics for dielectric capacitor applications

Yichen Wu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramic with large energy density and high efficiency under a moderate electric field

Xiaoshuang Qiao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving high discharge energy density and efficiency with NBT-based ceramics for application in capacitors

Zhongbin Pan et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Multilayer Lead-Free Ceramic Capacitors with Ultrahigh Energy Density and Efficiency

Jinglei Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Materials Science, Ceramics

Temperature-stable dielectric and energy storage properties of La(Ti0.5Mg0.5)O3-doped (Bi0.5Na0.5)TiO3-(Sr0.7Bi0.2)TiO3 lead-free ceramics

Nianshun Zhao et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Rare earth and transition metal based entropy stabilised perovskite type oxides

Abhishek Sarkar et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Influence of BaSnO3 additive on the energy storage properties of Na0.5Bi0.5TiO3-based relaxor ferroelectrics

Lei Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

A five-component entropy-stabilized fluorite oxide

Kepi Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

A new class of high-entropy perovskite oxides

Sicong Jiang et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Energy Storage Density and Optical Transparency of Microwave Sintered Homogeneous (Na0.5Bi0.5)((1-x))BaxTi(1-y)SnyO3 Ceramics

Yongping Pu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Materials Science, Ceramics

Enhanced piezoelectricity and energy storage performances of Fe-doped BNT-BKT-ST thin films

Shuanghao Wu et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Progress in high-strain perovskite piezoelectric ceramics

Jigong Hao et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)

Add to Collection

Article Multidisciplinary Sciences

Entropy-stabilized oxides

Christina M. Rost et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Relaxor-based ferroelectric single crystals: Growth, domain engineering, characterization and applications

Enwei Sun et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Add to Collection

Article Materials Science, Ceramics

Tailoring the Piezoelectric and Relaxor Properties of (Bi1/2Na1/2)TiO3-BaTiO3 via Zirconium Doping

Julia Glaum et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and properties of (Bi1/2Na1/2)TiO3-Ba(Ti,Zr)O3 lead-free diezoelectric ceramics

C Peng et al.

MATERIALS LETTERS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.