☆ 4.7 Article

Practical negative stiffness device with viscoelastic damper in parallel or series configuration for cable damping improvement

JOURNAL OF SOUND AND VIBRATION (2023)

Related references

Note: Only part of the references are listed.

Article Acoustics

Effectiveness of damping and inertance of two dampers on mitigation of multimode vibrations of stay cables by using the finite difference method

Yuanyuan Wang et al.

Summary: In this paper, the effectiveness of two different types of dampers in reducing rain-wind induced vibration and vortex-induced vibration on cable-stayed bridges with long spans is investigated. The results show that a combination of two dampers can effectively enhance the damping ratios and reduce vibration levels for different modes.

JOURNAL OF VIBRATION AND CONTROL (2023)

Add to Collection

Article Engineering, Civil

Design Formulas of Electromagnetic Inertial Mass Dampers for Cable Vibration Mitigation

Yamin Li et al.

Summary: This study proposes design formulas for an electromagnetic inertial mass damper (EIMD), based on inerter, for bridge stay cables. The design formulas for the optimal inertance coefficient and damping coefficient of the EIMD are derived to maximize the modal damping ratio for a specific cable vibration mode. The accuracy of the design formulas is validated through numerical simulation and full-scale experimental study, providing simple design formulas for easy use in cable vibration mitigation engineering practice.

JOURNAL OF BRIDGE ENGINEERING (2022)

Add to Collection

Article Acoustics

High-mode vortex-induced vibration of stay cables: monitoring, cause investigation, and mitigation

Sunjoong Kim et al.

Summary: This case study investigates the cause of high-mode vortex-induced vibration (VIV) in stay cables of a cable-stayed bridge using long-term field monitoring data. Wind characteristics and dynamic responses of girders and stay cables were analyzed to study two potential vibration sources - interactions with girders and vortex shedding. A novel modal decomposition procedure and damping identification technique were proposed to reveal the relationship between shedding frequencies of stay cables, critical wind velocities, and the damping capacity's effect on modal VIV amplitudes. The effectiveness of Stockbridge dampers in mitigating high-mode cable VIVs was examined through field application and comparison analysis during a typhoon. The unique interaction between stay cable vibrations and the buffeting response of bridge girders was also discussed.

JOURNAL OF SOUND AND VIBRATION (2022)

Add to Collection

Article Engineering, Mechanical

Frequency-dependency/independency analysis of damping magnification effect provided by tuned inerter absorber and negative stiffness amplifying damper considering soil-structure interaction

Meng Wang et al.

Summary: This paper systematically compares and discusses the optimal design and seismic performance of tuned viscous mass damper (TVMD) and negative stiffness amplifying damper (NSAD) from the point of soil-structure interaction (SSI).

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic behavior and damping enhancement of cable with negative stiffness inerter damper

Hui Gao et al.

Summary: A novel negative stiffness inerter damper (NSID) is proposed in this study to improve the control performance of stay cables. The NSID utilizes the damping enhancement of negative stiffness and inerter for cable vibration control. The study explores the modal behavior of the cable based on optimum parameters of the NSID and demonstrates the principle and conditions of the NSID for cable vibration control. The NSID performs better than other dampers in mitigating cable vibrations.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

A programmable pseudo negative stiffness control device and its role in stay cable vibration control

Yan-Wei Xu et al.

Summary: A programmable intelligent control device based on magnetorheological(MR) damper is developed to control the vibration of stay cables. Simulation and experimental results show that the programmable control scheme provides better damping performance.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Construction & Building Technology

Damping of a stay cable with two eddy-current inertial mass dampers: Theoretical analysis, experimental study, and parameter optimization

Zhihao Wang et al.

Summary: This paper develops a new inerter-based damper called the eddy-current inertial mass damper (ECIMD) and investigates the damping effect of installing two ECIMDs on a single stay cable through theoretical analysis, experimental study, and parameter optimization. Results show that the damping effect of ECIMDs is closely related to their installation position and mechanical properties.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Add to Collection

Article Engineering, Civil

Optimum design of viscous inerter damper targeting multi-mode vibration mitigation of stay cables

Hui Gao et al.

Summary: An optimum design procedure based on output feedback control theory is proposed in this study to suppress multi-mode cable vibrations using viscous inerter dampers. The proposed design method effectively minimizes the performance index of the cable-VID system and demonstrates superior control performance compared to traditional viscous dampers. However, the advantage of the VID for higher-order cable modes may diminish as the design cable mode increases.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Experimental study on high-mode vortex-induced vibration of stay cable and its aerodynamic countermeasures

Zhiwen Liu et al.

Summary: This study investigates the high-mode vortex-induced vibration (VIV) characteristics of stay cables in cable-stayed bridges and effective suppression measures through experimental research. The results show that stay-cable VIV can be effectively suppressed by increasing the damping ratio under low damping conditions. Helical fillets are found to have limited effectiveness in suppressing high-mode VIV responses.

JOURNAL OF FLUIDS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Optimal design of two viscous dampers for multi-mode control of a cable covering broad frequency range

Chao Yang et al.

Summary: This study explores a novel optimal design of two viscous dampers near a cable anchorage to control both low and high mode vibrations of cables. By investigating the mode shape characteristics of a cable with two viscous dampers, the complexity of optimal damper design is reduced.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Inerter dampers with linear hysteretic damping for cable vibration control

Limin Sun et al.

Summary: The study focuses on using inerters with enhanced linear hysteretic damping to control cable vibrations. It is found that significant improvement on the multimode damping of a cable can be achieved by using two inerters connected in series and in parallel with a linear hysteretic damper.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Optimal design of tuned inerter dampers with series or parallel stiffness connection for cable vibration control

Xiang Shi et al.

Summary: This study investigates the vibration mitigation mechanism of tuned Inerter dampers for stay cables, analyzing the impact of different connection modes and providing optimal tuning formulas for rapid design. The performance of the dampers is essentially determined by the inertance value, which can be adjusted through tuning the stiffness in the dampers to mitigate adverse effects.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Add to Collection

Article Acoustics

A unified analysis of negative stiffness dampers and inerter-based absorbers for multimode cable vibration control

Lin Chen et al.

Summary: This study conducts a unified analysis of the multimode damping effects of negative stiffness and inerter mechanisms when combined with a viscous damper for cable vibration control. It demonstrates that an ideal NSD evenly improves damping for each cable mode, while using an IVA requires balancing damping effects for multiple cable modes. The tuned inerter damper is found to have the best performance among investigated IVAs.

JOURNAL OF SOUND AND VIBRATION (2021)

Add to Collection

Article Construction & Building Technology

Optimized negative stiffness damper with flexible support for stay cables

Peng Zhou et al.

Summary: This study simplifies the design of an NSD for multimode cable vibration control using a flexible support. The optimization procedure and simplified method effectively reduce the design complexity, and validation results show that a small-sized NSD with a flexible support can achieve the required damping.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

Add to Collection

Article Engineering, Civil

Suppression of vortex-induced high-mode vibrations of a cable-damper system by an additional damper

Fangdian Di et al.

Summary: This study proposes adding an additional device to suppress high-mode cable vibrations induced by vortex, and investigates the effectiveness of different types of dampers in improving cable damping. Results show that viscous damper, high-damping rubber damper, and tuned mass damper can all reduce vulnerability of cable modes to vortex-induced vibrations.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Suppression of vortex-induced vibration of a circular cylinder by a passive-jet flow control

Wen-Li Chen et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Add to Collection

Article Construction & Building Technology

Impact of support stiffness on the performance of negative stiffness dampers for vibration control of stay cables

Majd Javanbakht et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

Add to Collection

Article Construction & Building Technology

A passive negative stiffness damper in series with a flexible support: Theoretical and experimental study

Peng Zhou et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

Add to Collection

Article Construction & Building Technology

The Third Bosphorus Bridge: A Milestone in Long-span Cable Technology Development and Hybrid Bridges

Matthieu Guesdon et al.

STRUCTURAL ENGINEERING INTERNATIONAL (2020)

Add to Collection

Article Engineering, Civil

A comparative study of multi-mode cable vibration control using viscous and viscoelastic dampers through field tests on the Sutong Bridge

Lin Chen et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Dynamic Characteristics and Responses of Damped Outrigger Tall Buildings Using Negative Stiffness

Meng Wang et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

Add to Collection

Article Acoustics

Inertial mass damper for vibration control of cable with sag

Zhi-Hao Wang et al.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2020)

Add to Collection

Article Engineering, Civil

Feasibility of Using a Negative Stiffness Damper to Two Interconnected Stay Cables for Damping Enhancement

Peng Zhou et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2019)

Add to Collection

Article Engineering, Mechanical

Cable Vibration Suppression with Inerter-Based Absorbers

Jiannan Luo et al.

JOURNAL OF ENGINEERING MECHANICS (2019)

Add to Collection

Article Construction & Building Technology

Tuned tandem mass dampers-inerters with broadband high effectiveness for structures under white noise base excitations

Liyuan Cao et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

Add to Collection

Article Engineering, Mechanical

Identification of optimum cable vibration absorbers using fixed-sized-inerter layouts

Jiannan Luo et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Civil

Vibration mitigation of stay cables using electromagnetic inertial mass dampers: Full-scale experiment and analysis

Yamin Li et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Free Vibration and Damping of a Taut Cable with an Attached Viscous Mass Damper

Viet Hung Cu et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2018)

Add to Collection

Article Acoustics

Dynamic characteristics of stay cables with inerter dampers

Xiang Shi et al.

JOURNAL OF SOUND AND VIBRATION (2018)

Add to Collection

Article Construction & Building Technology

Refined damper design formula for a cable equipped with a positive or negative stiffness damper

Majd Javanbakht et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2018)

Add to Collection

Article Engineering, Civil

Cables interconnected with tuned inerter damper for vibration mitigation

Limin Sun et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

Experimental Study on Passive Negative Stiffness Damper for Cable Vibration Mitigation

Xiang Shi et al.

JOURNAL OF ENGINEERING MECHANICS (2017)

Add to Collection

Article Construction & Building Technology

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Yongkui Wen et al.

JOURNAL OF STRUCTURAL ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Inertial mass damper for mitigating cable vibration

Lei Lu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2017)

Add to Collection

Article Engineering, Mechanical

Experimental Study on Passive Negative Stiffness Damper for Cable Vibration Mitigation

Xiang Shi et al.

JOURNAL OF ENGINEERING MECHANICS (2017)

Add to Collection

Article Construction & Building Technology

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures

Yongkui Wen et al.

JOURNAL OF STRUCTURAL ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Modeling and control performance of a negative stiffness damper for suppressing stay cable vibrations

Peng Zhou et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2016)

Add to Collection

Article Engineering, Civil

Vibration suppression of cables using tuned inerter dampers

I. F. Lazar et al.

ENGINEERING STRUCTURES (2016)

Add to Collection

Article Instruments & Instrumentation

Dynamic behavior of stay cables with passive negative stiffness dampers

Xiang Shi et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Engineering, Civil

Cable with discrete negative stiffness device and viscous damper: passive realization and general characteristics

Lin Chen et al.

SMART STRUCTURES AND SYSTEMS (2015)

Add to Collection

Proceedings Paper Construction & Building Technology

Performance Analysis of Cables with Attached Tuned-Inerter-Dampers

Irina F. Lazar et al.

DYNAMICS OF CIVIL STRUCTURES, VOL 2 (2015)

Add to Collection

Article Engineering, Civil

Using an inerter-based device for structural vibration suppression

I. F. Lazar et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2014)

Add to Collection

Article Construction & Building Technology

Negative Stiffness Device for Seismic Protection of Structures

A. A. Sarlis et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

Adaptive Negative Stiffness: New Structural Modification Approach for Seismic Protection

D. T. R. Pasala et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

Add to Collection

Article Instruments & Instrumentation

Bouc-Wen model-based real-time force tracking scheme for MR dampers

F. Weber

SMART MATERIALS AND STRUCTURES (2013)

Add to Collection

Article Engineering, Civil

Seismic control of single-degree-of-freedom structure using tuned viscous mass damper

Kohju Ikago et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2012)

Add to Collection

Article Instruments & Instrumentation

Clipped viscous damping with negative stiffness for semi-active cable damping

F. Weber et al.

SMART MATERIALS AND STRUCTURES (2011)

Add to Collection

Article Construction & Building Technology

The role of negative stiffness in semi-active control of magneto-rheological dampers

Jan Hogsberg

STRUCTURAL CONTROL & HEALTH MONITORING (2011)

Add to Collection

Article Construction & Building Technology

Negative stiffness characteristics of active and semi-active control systems for stay cables

Hui Li et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2008)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Semiactive damping of cables with sag

EA Johnson et al.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2003)

Add to Collection

Article Automation & Control Systems

Synthesis of mechanical networks: The inerter

MC Smith

IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2002)

Add to Collection

Article Multidisciplinary Sciences

Vibrations of a shallow cable with a viscous damper

S Krenk et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2002)

Add to Collection

Article Mechanics

Vibrations of a taut cable with an external damper

S Krenk

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.