☆ 4.6 Article

Fabrication of PW11Zn@MOF-808 and its catalytic activity for oxidative desulfurization of fuel oil: Kinetics, thermodynamics and mechanism

JOURNAL OF SOLID STATE CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Review Energy & Fuels

Excellent catalytic performance over acid-treated MOF-808(Ce) for oxidative desulfurization of dibenzothiophene

Liang Chu et al.

Summary: Developing highly active oxidative desulfurization (ODS) catalysts is of practical importance. In this study, acid-treated MOF-808-F catalyst exhibited significantly enhanced catalytic activity, achieving efficient oxidation of DBT. The effects of acid concentration and treatment time on the catalyst's structure and performance were investigated and optimized. This research is important for a better understanding of the catalytic mechanism of Ce-based MOFs in the desulfurization process.

FUEL (2023)

Add to Collection

Article Chemistry, Physical

Amphiphilic polyoxoniobate-based recoverable Pickering emulsion for effective oxidative desulfurization

Huifang Liu et al.

Summary: A straightforward emulsion assisted assembly strategy has been developed to fabricate amphiphilic polyoxoniobates (PONbs) composite, which can effectively catalyze oxidative desulfurization under mild conditions and enable automatic separation and recycle of products and catalysts for consecutive use.

APPLIED CATALYSIS A-GENERAL (2023)

Add to Collection

Article Chemistry, Physical

Unveiling and understanding the remarkable enhancement in the catalytic activity by the defect creation in UIO-66 during the catalytic transfer hydrodeoxygenation of vanillin with isopropanol

Ashish Kumar Kar et al.

Summary: In this study, the catalytic transfer hydrodeoxygenation (CTHDO) of vanillin over a defect-induced UIO-66 MOF was investigated. The unique structural features of the defect-induced UIO-66 MOF significantly enhanced the CTHDO of vanillin. The creation of defects, confirmed by various characterization techniques, resulted in the generation of Lewis acid and dynamic Bronsted acid.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection

Article Energy & Fuels

Preparation of CeVO4/BNNS catalyst and its application in oxidation desulfurization of diesel oil

Xinyu Li et al.

Summary: This work reports a novel cerium-vanadium bimetallic catalyst supported by boron nitride nanosheets (CeVO4/BNNS) for the efficient removal of sulfur-containing compounds from diesel fuel through catalyzing molecular oxygen. The CeVO4/BNNS catalyst was prepared successfully and showed good stability after six times recycle. The efficient removal of 4,6-DMDBT, DBT, and BT was achieved due to the synergistic effect of CeVO4 bimetallic oxide and the strong affinity of BNNS for sulfur-containing compounds.

FUEL (2023)

Add to Collection

Review Green & Sustainable Science & Technology

Mitigating oil and gas pollutants for a sustainable environment-Critical review and prospects

Abdurrashid Haruna et al.

Summary: The oil and gas industry creates harmful pollutants throughout its processes, which pose environmental risks and threaten human well-being. These pollutants displace animals, degrade arable land, and have a detrimental impact on the global environment. Thus, it is crucial to control and reduce emissions to ensure a safe and sustainable environment. This review examines the policies, harmful effects, and technologies for removing oil and gas pollutants, emphasizing the role of novel catalysts and adsorbents in converting these pollutants into environmentally friendly products. It also discusses the potential of renewable energy technologies in mitigating waste pollutants.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection

Article Chemistry, Applied

Ionic liquid-derived molybdenum oxide encapsulated in 3D ordered meso/macroporous ZrO2 matrix as promising catalyst for the oxidation of dibenzothiophene in fuel oil

Yue Du et al.

Summary: The preparation of a 3D meso/macroporous Mo/ZrO2 composite derived from an ionic liquid using a dual-template self-assembling process has shown promising results in the production of sulfur-free diesel fuel.

MICROPOROUS AND MESOPOROUS MATERIALS (2023)

Add to Collection

Article Biochemistry & Molecular Biology

Efficient Diesel Desulfurization by Novel Amphiphilic Polyoxometalate-Based Hybrid Catalyst at Room Temperature

Jie Zhao et al.

Summary: Amphiphilic hybrid catalysts were prepared by modifying [SMo12O40](2-) with tetrabutylammonium bromide (TBAB), 1-butyl-3-methylimidazole bromide (BMIMBr), and octadecyl trimethyl ammonium bromide (ODAB). The catalysts were characterized by various techniques and showed favorable activity for removing sulfur compounds at room temperature in model oil and actual diesel. Different catalysts exhibited varying levels of removal effect, with [TBA](2)SMo12O40 catalyst showing the best performance.

MOLECULES (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Design of Zr-MOFs by Introducing Multiple Ligands for Efficient and Selective Capturing of Pb(II) from Aqueous Solutions

Xiang Liu et al.

Summary: A novel metal-organic framework adsorbent (UiO-FHD) is developed, which efficiently and selectively captures lead ions by introducing multiple ligands. The maximum adsorption capacity of lead ions is 433.15 mg/g at pH 5. The adsorption process follows pseudo-second-order kinetic and Langmuir isotherm models, and appropriate temperature reduction facilitates the removal of Pb(II). Performance tests show that UiO-FHD maintains a high removal rate of 90.35% for Pb(II) after four consecutive adsorption-desorption cycles.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Engineering, Environmental

Encapsulation of HPW and preparation of composites rich in Zr-defects by manual grinding: Synergistic catalysis for efficient oxidative desulfurization at room temperature

Chongfu Wu et al.

Summary: The development of catalysts with excellent performance in oxidative desulfurization at room temperature will greatly advance desulfurization technology. A novel and efficient strategy of incorporating HPW into UiO-66 through 4-aminopyridine molecular bridging and manual grinding was proposed to achieve stable PW loading and generate abundant defects, resulting in active complexes with strong oxidation ability. The prepared catalyst exhibited outstanding catalytic activity in the ODS system, achieving complete desulfurization in a short time at room temperature. The synergistic catalytic effect of the faulty UiO-66 and PW was identified as the main reason for the superior catalytic performance.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy regulation strategy in V-Nb mixed oxides catalyst for enhanced aerobic oxidative desulfurization performance

Haofeng Chen et al.

Summary: This article proposes an oxygen vacancies (OVs) regulation strategy to enhance the catalytic activity of bimetallic oxide for oxidative desulfurization of fuel. By synthesizing V-Nb mixed oxide with different crystal phases, it was found that the tetragonal V-Nb mixed oxide (T-VNbOx) has lower OVs formation energy and larger OVs concentration, leading to significantly improved catalytic activity and cycling stability for ultra-deep oxidative desulfurization.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Engineering, Chemical

N-doped carbon nanotube encapsulated nZVI as a high-performance bifunctional catalyst for oxidative desulfurization

Ge Zhang et al.

Summary: Efforts have been made to remove sulfur from fossil fuels in order to protect the environment. We proposed a synthesis method for high efficiency oxidation desulfurization (ODS) catalysts by encapsulating nano zero valent iron (nZVI) in self-catalyzed carbon nanotubes. The optimized catalyst showed outstanding catalytic performance and enhanced stability, providing a creative idea for the rational design and synthesis of advanced ODS catalysts for fuel oil.

PARTICUOLOGY (2023)

Add to Collection

Article Energy & Fuels

Catalyst Stacking Technology as a Viable Solution to Ultralow Sulfur Diesel Production

Emilio Leal et al.

Summary: This article discusses a technology of placing different catalysts in multibed configurations to produce a synergistic effect and proposes it as a viable low-investment solution for ultralow sulfur diesel (ULSD) production. However, the synergistic effect between the catalysts is not fully understood yet, and designing the best stacking system is challenging. Therefore, further research on the influences of variables and the development of new mathematical models are necessary.

ENERGY & FUELS (2022)

Add to Collection

Article Environmental Sciences

Preparation of formate-free PMA@MOF-808 catalysts for deep oxidative desulfurization of model fuels

Cheng Wang et al.

Summary: The catalyst PMA@MOF-808-H showed excellent performance in deep desulfurization, especially without formate ions present.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of MOF-808(Zr) with abundant defects by cleaving Zr-O bond for oxidative desulfurization of fuel oil

Yulong Gu et al.

Summary: The study demonstrated that MOF-808(Zr) with abundant defects can be fabricated by treating with NH4HCO3 solution, leading to superior catalytic activity in the oxidative desulfurization reaction of dibenzothiophene.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in catalytic oxidative desulfurization of fuel oil-A review

Abdurrashid Haruna et al.

Summary: Sulfur compounds in fuel have negative impacts on the environment and human health, making the development of desulfurization technologies crucial. The emerging class of POM@MOFs materials shows great potential in deep desulfurization and offers advantages over conventional technologies.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Synthesis of a Novel Ni-WO3@g-C3N4 Nanocomposite for Efficient Oxidative Desulfurization of Both Model and Real Fuel

Muhammad Saeed et al.

Summary: The current study successfully synthesized a Ni-WO3@g-C3N4 composite nanocatalyst for oxidative desulfurization of both model and real fuel oils. The synthesized composite was characterized using various techniques, and the results showed that the catalyst had a high removal efficiency of dibenzothiophene (DBT) under optimized conditions. Additionally, the catalyst showed promising reusability and met the fuel properties specifications.

ACS OMEGA (2022)

Add to Collection

Review Energy & Fuels

Sulfur removal technologies from fuel oil for safe and sustainable environment

Abdurrashid Haruna et al.

Summary: Fuel oil consumption has increased due to rapid population growth, but its pollution issues have become a major threat to the petrochemical industry. Developed nations have imposed restrictions on sulfur in fuel oil to mitigate the environmental and health concerns. This review discusses various desulfurization technologies and highlights the importance of developing green fuel oil.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Ultrafine W2C well-dispersed on N-doped graphene: Extraordinary catalyst for ultrafast oxidative desulfurization of high sulfur liquid fuels

Peng Zuo et al.

Summary: The ternary nanocomposite PW12-PEI/GO was developed as a precursor for the W2C/N-rGO catalyst, which exhibited extraordinary performance in deep oxidative desulfurization (ODS) of liquid fuel, particularly in the complete removal of DBT with high turnover frequency and low activation energy. Radical experiments and density functional theory calculations suggest that the ODS reaction mainly proceeds via a HO center dot radical mechanism. Furthermore, the W2C/N-rGO catalyst showed no obvious loss of performance after 6 cycles of recycling.

APPLIED CATALYSIS A-GENERAL (2022)

Add to Collection

Article Chemistry, Applied

Preparation of new MOF-808/chitosan composite for Cr(VI) adsorption from aqueous solution: Experimental and DFT study

Farshad Mirzaee Valadi et al.

Summary: In this study, Zirconium-based MOF and chitosan composites were synthesized as efficient adsorbents for removing Cr(VI) ions from aqueous solution. The structure and morphology of MOF-808/chitosan were characterized, and the adsorption process was found to follow pseudo-second-order kinetic model and Langmuir isotherm model. Thermodynamic investigation indicated that the adsorption process was spontaneous, disordered, and endothermic. The DFT study confirmed the role of hydrogen bonding and electrostatic attraction in the adsorption process.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Article Chemistry, Applied

Bimetal-organic framework-derived nanotube@cellulose aerogels for peroxymonosulfate (PMS) activation

Yuhang Wu et al.

Summary: By loading bimetallic MOF-derived carbon nanotubes on cellulose aerogel, a composite aerogel was developed for degrading tetracycline. The composite catalyst exhibits excellent performance, which is closely related to the synergistic effect of bimetallic catalytic sites, graphitic N structure, and porous network.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Article Environmental Sciences

Development of reduced graphene oxide-supported novel hybrid nanomaterials (Bi2WO6@rGO and Cu-WO4@rGO) for green and efficient oxidative desulfurization of model fuel oil for environmental depollution

Aqsa Riaz et al.

Summary: For the first time, two new types of inorganic-organic hybrid nanomaterials were fabricated and utilized for efficient oxidative desulfurization of real fuel. The catalytic activity of both nanocatalysts exceeded 90% efficiency under optimal reaction conditions, with promising reusability for up to 5 times.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Energy & Fuels

Adsorptive desulfurization of model fuels using ferrite nickel-silica in continues system: Modelling of breakthrough curves, thermodynamic study and experimental design

Fahimeh Vafaee et al.

Summary: In this study, ferrite nickel-silica nanocomposite was synthesized and used for the removal of DBT from model fuel through adsorption in a fixed-bed column. The synthesized nanocomposite was characterized and the effective parameters of the adsorption process were evaluated. Kinetic and isotherm models were established, and the Langmuir model showed good agreement with the experimental results.

FUEL (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Investigation of isotherms and isosteric heat of adsorption for PW11@HKUST-1 composite

Suleiman Gani Musa et al.

Summary: This study reports the impregnation of PW11 nanoclusters into HKUST-1 to investigate the adsorption properties of CO2. The results show that the introduction of PW11 enhances the affinity of HKUST-1 for CO2, improving its adsorption performance.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection

Article Energy & Fuels

In situ fabrication of hollow silica confined defective molybdenum oxide for enhanced catalytic oxidative desulfurization of diesel fuels

Wei Jiang et al.

Summary: In this study, a hollow silica confined defective molybdenum oxide catalyst was successfully prepared, demonstrating higher activity and desulfurization efficiency compared to a solid silica-supported catalyst. Oxygen defects were found to play a positive role in promoting oxidation reactions, and the catalyst exhibited good stability and selectivity, making it a promising candidate for industrial applications.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

PMo12@UiO-67 nanocomposite as a novel non-leaching catalyst with enhanced performance durability for sulfur removal from liquid fuels with exceptionally diluted oxidant

Reza Abazari et al.

Summary: In this study, a novel heterogeneous catalyst was developed for the removal of sulfur compounds, showing high catalytic activity and good recyclability.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Chemistry, Applied

An Effective Magnetic Catalyst for Oxidative Desulfurization of Model and Real Fuels: Fe3O4/ZIF-8/TiO2

Hossein Kargar et al.

Summary: The research on Fe3O4/ZIF-8/TiO2 composite catalyst demonstrates its efficiency, stability, and easy recovery in oxidative desulfurization process, providing important insights for future industrial applications.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Add to Collection

Review Energy & Fuels

A Review on the Reaction Mechanism of Hydrodesulfurization and Hydrodenitrogenation in Heavy Oil Upgrading

Suleiman Sabo Bello et al.

Summary: The future of fuel supply will involve the utilization of heavy crude oils, which require initial hydrotreatment for conversion into qualified fuel oils or synthetic crude. The removal of sulfur and nitrogen compounds from heavy crude oils is a critical and challenging part of the upgrading process. However, the mechanisms of these reactions are not fully understood, requiring further research for innovative solutions.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

Defective UiO-66(Zr) as an efficient catalyst for the synthesis of bio jet-fuel precursors via aldol condensation of furfural and MIBK

Daniel de la Flor et al.

Summary: The production of jet-fuel precursors from furfural via aldol-condensation with methyl-isobutyl ketone over a defective UiO-66(Zr) catalyst, prepared using formic acid as modulator, has shown remarkable catalytic performance. Extensive characterization and optimization of reaction conditions have identified temperature as the most relevant parameter affecting selectivity. However, catalyst deactivation due to organic deposits formation from furfural side reactions remains a challenge.

JOURNAL OF CATALYSIS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A new phase transfer nanocatalyst NiFe2O4-PEG for removal of dibenzothiophene by an ultrasound assisted oxidative process: kinetics, thermodynamic study and experimental design

Fahimeh Vafaee et al.

Summary: In this study, an effective nanocatalyst NiFe2O4-PEG was successfully synthesized and applied in ultrasound assisted oxidative desulfurization for the first time. The characterization of the nanocatalyst was conducted using various analytical techniques, and central composite design was utilized to evaluate the effective variables in the UAOD process.

RSC ADVANCES (2021)

Add to Collection

Article Engineering, Environmental

Co-ZIF-67 encapsulated phosphomolybdic acid as a hybrid catalyst for deep oxidative desulfurization

Mitra Jafarinasab et al.

Summary: A novel HPMo@Co-ZIF-67 composite catalyst was successfully synthesized for the efficient removal of DBTs from fuels, achieving a high ODS efficiency of 98%. The catalyst showed a stable structure with only 5% performance loss after five cycles of use, and no significant HPMo leaching was detected during the ODS treatment.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Heterogenisation of polyoxometalates and other metal-based complexes in metal-organic frameworks: from synthesis to characterisation and applications in catalysis

P. Mialane et al.

Summary: In recent years, there has been a significant interest in the heterogenisation of molecular catalysts, with Metal-Organic Frameworks (MOFs) serving as a platform for immobilizing the catalysts. This review thoroughly discusses the preparation methods, analytical tools, and applications of Cat@MOF composites in catalysis.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Review Engineering, Environmental

Review on the progress in emission control technologies for the abatement of CO2, SOx and NOx from fuel combustion

Usama Asghar et al.

Summary: Extensive research has been conducted on controlling CO2, SOx, and NOx emissions in recent years, with a focus on improving removal efficiencies and reducing operational costs of conventional technologies while introducing new environmentally friendly technologies.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Biochemical Research Methods

Fabrication of iron oxide@MOF-808 as a sorbent for magnetic solid phase extraction of benzoylurea insecticides in tea beverages and juice samples

Yeqing Jia et al.

JOURNAL OF CHROMATOGRAPHY A (2020)

Add to Collection

Article Chemistry, Physical

Catalytic oxidation of DBT for ultra-deep desulfurization under MoO3 modified magnetic catalyst: The comparison influence on various morphologies of MoO3

Si-Wen Li et al.

APPLIED CATALYSIS A-GENERAL (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Combining Two into One: A Dual-Function H5PV2Mo10O40 @MOF-808 Composite as a Versatile Decontaminant for Sulfur Mustard and Soman

Yuanyuan Zhou et al.

INORGANIC CHEMISTRY (2020)

Add to Collection

Article Chemistry, Applied

3D-printing of integrated spheres as a superior support of phosphotungstic acid for deep oxidative desulfurization of fuel

Jie Zhu et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Metal-organic frameworks as solid Bronsted acid catalysts for advanced organic transformations

Wei Gong et al.

COORDINATION CHEMISTRY REVIEWS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Covalent immobilization of Dawson polyoxometalates on hairy particles and its catalytic properties for the oxidation desulfurization of tetrahydrothiophene

Yefeng Liu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

Cu/UiO-66: a novel nanocatalyst obtained by a microwave-assisted protocol in DMF-free media for the efficient phenol removal via catalytic wet peroxide oxidation

Luis A. Lozano et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Visible-light-driven hydrogen evolution using a polyoxometalate-based copper molecular catalyst

Yuan-Sheng Ding et al.

DALTON TRANSACTIONS (2020)

Add to Collection

Review Chemistry, Physical

A comprehensive review on oxidative desulfurization catalysts targeting clean energy and environment

Antony Rajendran et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Polyoxometalate-based high-nuclear cobalt-vanadium-oxo cluster as efficient catalyst for visible light-driven CO2 reduction

Lizhen Qiao et al.

CHINESE CHEMICAL LETTERS (2019)

Add to Collection

Review Energy & Fuels

Advanced Hydrodesulfurization Catalysts: A Review of Design and Synthesis

Abdulkadir Tanimu et al.

ENERGY & FUELS (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Five Transition-Metal-Substituted Polyoxometalates: Syntheses, Structures and Electrochemical Properties

Zhi-Hui Ni et al.

JOURNAL OF CLUSTER SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Deep oxidative desulfurization of diesel fuels using homogeneous and SBA-15-supported peroxophosphotungstate catalysts

Diana Juliao et al.

FUEL (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Zr-Based Metal-Organic Frameworks with Intrinsic Peroxidase-Like Activity for Ultradeep Oxidative Desulfurization: Mechanism of H2O2 Decomposition

He-Qi Zheng et al.

INORGANIC CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Metal-organic frameworks: A tunable platform to access single-site heterogeneous catalysts

Megan C. Wasson et al.

APPLIED CATALYSIS A-GENERAL (2019)

Add to Collection

Article Engineering, Environmental

Synthesis and characterization of PWMn/NiO/PAN nanosphere composite with superior catalytic activity for oxidative desulfurization of real fuel

Mohammad Ali Rezvani et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Heterogeneous Catalysis by Polyoxometalates in Metal-Organic Frameworks

Maryam Samaniyan et al.

ACS CATALYSIS (2019)

Add to Collection

Article Chemistry, Physical

Synergistic effect of Zr-MOF on phosphomolybdic acid promotes efficient oxidative desulfurization

Xiao-min Zhang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Chemistry, Physical

Zn-vacancy mediated electron-hole separation in ZnS/g-C3N4 heterojunction for efficient visible-light photocatalytic hydrogen production

Xuqiang Hao et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

Charge-regulated sequential adsorption of anionic catalysts and cationic photosensitizers into metal-organic frameworks enhances photocatalytic proton reduction

He Li et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Inorganic & Nuclear

A size-matched POM@MOF composite catalyst for highly efficient and recyclable ultra-deep oxidative fuel desulfurization

Yun-Lei Peng et al.

INORGANIC CHEMISTRY FRONTIERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of mesoporous WO3/TiO2 catalyst and its excellent catalytic performance for the oxidation of dibenzothiophene

Yuejiao Qin et al.

NEW JOURNAL OF CHEMISTRY (2017)

Add to Collection

Article Chemistry, Physical

Biomimetic oxidative desulfurization of fuel oil in ionic liquids catalyzed by Fe (III) porphyrins

Rijie Zhao et al.

APPLIED CATALYSIS A-GENERAL (2017)

Add to Collection

Article Chemistry, Physical

Preparation, characterization, and photocatalytic activity of three-dimensionally ordered macroporous hybrid monosubstituted polyoxometalate K5[Co(H2O)PW11O39] amine functionalized titanium catalysts

Lu Lu et al.

JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2014)

Add to Collection

Article Chemistry, Physical

Oxidative desulfurization of diesel with oxygen: Reaction pathways on supported metal and metal oxide catalysts

Kerry M. Dooley et al.

APPLIED CATALYSIS A-GENERAL (2013)

Add to Collection

Article Chemistry, Applied

Host-guest synthesis and encapsulation of phosphotungstic acid in MIL-101 via bottle around ship: An effective catalyst for oxidative desulfurization

Xiaofu Hu et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

The oxidation of benzothiophene using the Keggin-type lacunary polytungstophosphate as catalysts in emulsion

Yongna Zhang et al.

JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2010)

Add to Collection

Article Chemistry, Physical

Ultra-deep oxidative desulfurization of diesel fuel by the Mo/Al2O3-H2O2 system: The effect of system parameters on catalytic activity

Jose Luis Garcia-Gutierrez et al.

APPLIED CATALYSIS A-GENERAL (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.