☆ 4.8 Article

A patching reinforcement strategy for hybrid surfactants as electrolyte additives with excellent performance in aluminum-air batteries

JOURNAL OF POWER SOURCES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Improving the performance of primary aluminum-air batteries through suppressing water activity by hydrogen bond-rich glycerol solvent additive

Thi Huong Pham et al.

Summary: In this study, glycerol was used as a low-cost and eco-friendly electrolyte additive in primary aluminum-air battery. Glycerol molecules formed hydrogen bonds with water molecules to reconstruct the hydrogen bond network in the electrolyte, resulting in a reduction in water activity. This expansion of the hydrogen evolution potential of the electrolyte suppressed the hydrogen evolution reaction and self-corrosion of aluminum anodes, leading to significantly increased capacity density and energy density of the Al-air battery. With a glycerol content of 20% in 4 M NaOH electrolyte, the capacity density of the Al-air battery reached 2564 mAh g -1, which was 2.3 times higher than in the absence of glycerol.

ENERGY STORAGE MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Effect of cetyl trimethyl ammonium bromide as an electrolyte additive on secondary discharge performance of aluminum-air battery

Huihui Luo et al.

Summary: The standby protection of the aluminum-air battery using electrolyte additives such as CTAB can effectively reduce the corrosion of aluminum alloy, improve the battery's restart performance, and shorten the restart time by 97.27%.

IONICS (2023)

Add to Collection

Article Chemistry, Physical

Influence of an imidazole-based ionic liquid as electrolyte additive on the performance of alkaline Al-air battery

Qiao Zhang et al.

Summary: In this study, an imidazole-based ionic liquid (HMIC) was explored as a corrosion inhibitor for Al-5052 alloy in 4 M NaOH electrolyte. The electrochemical tests showed that the inhibition efficiency reached 58.2% at a concentration of 7 mM HMIC, and the anode utilization increased to 82.9%. X-ray photoelectron spectroscopy (XPS) and molecular dynamics simulation revealed that HMIC could adsorb on the surface of Al-5052 to form a protective barrier, preventing self-corrosion of the Al anode. Additionally, the addition of HMIC significantly improved the discharge performance of the Al-air battery, achieving a nominal specific capacity of 2469 mAh g(-1) and energy density of 3313 Wh kg(-1).

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Electrochemistry

Synergistic Effect of Vanadate and Nanoclay Hybrid Inhibitor on the Self-Corrosion and Discharge Activity of Al Anode in Alkaline Aluminum-Air Batteries

R. K. Harchegani et al.

Summary: This work addresses the issues of Al anode in aqueous Al-air batteries by applying an innovative design strategy with vanadate and nanoclay additives. The results showed that adding vanadate, nanoclay, and a hybrid combination of both effectively reduced Al anode corrosion, with the hybrid additive providing the highest inhibition efficiency of 72.6%. The anodic efficiency and capacity density of the anode reached 81.4% and 2426 mAh.g(-1) using the hybrid inhibitor. Electrochemical and microscopical analysis indicated that the corrosion inhibition of the additives was attributed to the formation of a protective film on the Al anode surface. Therefore, this technique has the potential to increase the lifespan of Al-air batteries by enhancing the inhibition efficiency of the Al anode.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2023)

Add to Collection

Article Electrochemistry

The Effect of a Nonionic Surfactant/ZnO Hybrid Inhibitor on the Self-Corrosion of Al Alloy in Alkaline Electrolyte and its Application to Al-air Batteries

Xueqin Wang et al.

Summary: To inhibit the self-corrosion of aluminum in alkaline electrolytes, a hybrid of nonionic surfactant BAG and ZnO is developed as an inhibitor. The results show that the hybrid inhibitor successfully inhibits the self-corrosion of aluminum with an inhibition efficiency of 85.7%. SEM and FTIR analysis reveal the formation of glucoside-Al and glucoside-Zn bonds on the aluminum surface. The BAG/ZnO hybrid improves the discharge performances of Al-air batteries, with a specific capacity of 2396 Ah kg(-1) at 20 mA cm(-2) and a high anode utilization efficiency of 80.4%.

CHEMELECTROCHEM (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Graphene-loaded and Mn-doped SrCoO3 perovskite oxide as a cathode catalyst for aluminum-air battery

S. P. Qin et al.

Summary: In this study, a SrCoO3 perovskite catalyst modified by loading graphene and doping Mn was prepared by sol-gel method. The effects of 20% graphene loading and 50% Mn doping on the performance of SrCoO3 perovskite as a cathode catalyst for Al-air battery were investigated. The results showed that 50% Mn-doped SrCo0.5Mn0.5O3 effectively improved the catalytic performance of oxygen reduction reaction (ORR). The catalyst containing the graphene-loaded SrCo0.5Mn0.5O3 perovskite exhibited outstanding electrocatalytic ORR activity and is suitable for use as cathode catalyst in Al-air battery.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Chemistry, Physical

Inhibiting anodic parasitic reaction for high-performance Al-air batteries via a multi-functional hybrid additive

Tao Wang et al.

Summary: A green, low-cost, and multi-functional ZnO/glucose hybrid additive (ZGHA) has been developed to continuously inhibit the parasitic hydrogen evolution reaction (HER) and stabilize the Al-metal anode in Al-air batteries. The addition of ZnO and glucose shows a synergy, achieving a more uniform and firmer Zn-containing protective layer on the Al surface. This work is instructive for developing long-life and green Al-air batteries.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Review Chemistry, Physical

A review of the Al-gas batteries and perspectives for a Real Al-air battery

Zhengying Zhang et al.

Summary: Aluminum-gas batteries are a type of fuel cell that directly converts chemical energy into electrical energy, offering high specific energy density, safety, and low cost. While most Al-gas batteries focus on reducing O2, there is limited research on using multi-component gases as cathode active gases. This review explores the electrode structure, catalytic principle, and electrolyte composition of various Al-gas batteries, investigating the differences and connections among different active gases and aiming for the development of a practical aluminum-air battery in the future.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Engineering, Environmental

Excellent performance of 8-hydroxyquinoline and alkyl polyglycolides hybrid electrolyte additives on aluminum-air battery

Wenyue Zhang et al.

Summary: We investigated the corrosion inhibition of Al-5052 anode in sodium hydroxide solution using 8-hydroxyquinoline (8-HQ) and decyl glucoside (DG) as hybrid additives. Gas evolution experiment, electrochemical measurements, morphological and spectral analysis, ellipsometer, and simulating computation were used to examine the corrosion inhibition strengthening mechanism. Results showed that 8-HQ could coordinate with Al3+ ions to form a complex film. DG could assemble on the complex film to improve corrosion inhibition performance through micelle solubilization. The optimum corrosion protection efficiency was 83.7% for 10 mM 8-HQ + 3 mM DG.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating solvation and interface chemistry enables advanced aluminum-air batteries

Chaonan Lv et al.

Summary: To solve the challenge of hydrogen evolution reaction, researchers have proposed a strategy of regulating solvation and interface chemistry by introducing organic methylurea (MU) and inorganic stannous chloride (SnCl2) to the alkaline electrolyte. This strategy can modulate the solvent structure and electrode/electrolyte interface, enabling the aqueous aluminum-air battery to achieve an outstanding mass-specific capacity of 2625 mA h g(-1) at 50 mA cm(-2).

CHEMICAL COMMUNICATIONS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges and Strategies of Low-Cost Aluminum Anodes for High-Performance Al-Based Batteries

Min Jiang et al.

Summary: The market growth of electric vehicles and grid-scale storage systems has driven the development of renewable energy storage technologies, with aluminum-based batteries emerging as a promising alternative to lithium-ion batteries. Despite their potential, challenges like self-corrosion and volume expansion in aluminum anodes hinder their commercialization. This article provides an overview of various aluminum-based batteries and strategies to address the anode-related issues for future development of advanced aluminum batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Effect of quinoline-8-sulfonic acid and CaO as hybrid electrolyte additives on microstructure and property of AA5052 alloy anode for aluminum-air battery

Junyu Yang et al.

Summary: This study developed hybrid corrosion inhibitors for the AA5052 alloy anode of Al-air battery in alkaline solution, finding that the combination of 8-QS and CaO significantly improved the protection efficiency and utilization rate of the alloy anode. The proposed synergistic mechanism between the two additives provides theoretical guidance for the development of hybrid additives in alkaline electrolytes.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Add to Collection

Article Engineering, Environmental

Near solution-level conductivity of polyvinyl alcohol based electrolyte and the application for fully compliant Al-air battery

Shihao Liu et al.

Summary: By introducing polyethylene oxide (PEO) and N,N'-methylene bisacrylamide (MBA) into polyvinyl alcohol (PVA) electrolyte, the contradiction between mechanical and electrochemical properties in Al-air batteries can be coordinated. The optimized gel electrolyte exhibits high ion conductivity and excellent porous structure, improving the power density, capacity density, and lifespan of the batteries. A flexible Al-air gel battery pack was demonstrated to drive a smart phone.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Modification on water electrochemical environment for durable Al-Air Battery: Achieved by a Low-Cost sucrose additive

Pengfei Wu et al.

Summary: In this study, a low-cost sucrose-modified electrolyte is used to enhance the durability of aluminum-air batteries. The sucrose molecules inhibit the corrosion of the aluminum anode, leading to improved battery performance and practical application prospects.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Electrochemistry

Synergistic regulating the aluminum corrosion by ellagic acid and sodium stannate hybrid additives for advanced aluminum-air battery

Chaonan Lv et al.

Summary: A design strategy is proposed to suppress the corrosion of aluminum anode in aqueous aluminum-air batteries by modifying the aluminum/electrolyte interface. The addition of hybrid additives significantly reduces the corrosion rate and enables higher discharge specific capacity in the aluminum-air battery.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Corrosion inhibition of hybrid H2QS/CaO additives for AA5052 alloy in alkaline solution

Junyu Yang et al.

Summary: The hybrid H(2)QS/CaO additive has synergistic effects to help form a stable composite film that significantly retards the hydrogen evolution reaction of the Al alloy anode for the alkaline AAB.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Evaluation of corrosion resistant, antimicrobial and cytocompatible behaviour of cobalt based metallosurfactants self-assembled monolayers on 316L stainless steel surface

Harshal Mehta et al.

Summary: The present research aims to develop a more economic and ecological way to improve the biocompatibility of medical-grade stainless steel. By functionalizing 316L stainless steel with self-assembled monolayers of cost-effective Cobalt-based metallosurfactants, superior corrosion and bacterial protection are provided without compromising the cytocompatibility of the surface, making them promising candidates for biomedical applications.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Physical

Solvation Structures in Aqueous Metal-Ion Batteries

Xiaomin Li et al.

Summary: This review summarizes the research progress in solvation structures in metal-ion batteries, introducing the design principles of solvation structure and its impact on battery performance, as well as the regulation methods and commonly used characterization methods for solvation structure.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution

Wenyue Zhang et al.

Summary: Dodecyl dimethyl betaine (BS-12) and calcium gluconate (CaGlu) were investigated as hybrid corrosion inhibitors for AA5052 aluminum alloy in 4 M NaOH electrolyte. The study demonstrated that the hybrid inhibitors can effectively protect the aluminum alloy with a maximum corrosion inhibition efficiency of 86.3%.

CORROSION SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Synergistic construction of bifunctional interface film on anode via a novel hybrid additive for enhanced alkaline Al-air battery performance

Liang Luo et al.

Summary: Aluminum-air battery is a promising clean energy source, but it is hindered by the self-corrosion of the aluminum anode. A new hybrid additive has been proposed to inhibit self-corrosion and form a dense bifunctional film on the anode, improving the battery's performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Anode Interfacial Layer Construction via Hybrid Inhibitors for High-Performance Al-Air Batteries

Hao Cheng et al.

Summary: A hybrid corrosion inhibitor containing ZnO and acrylamide was developed to construct a protective interface on the aluminum anode, effectively suppressing self-corrosion and enhancing the performance of Al-air batteries. The optimized combination of inhibitors showed a high inhibition efficiency, remarkable capacities, and a high power density in AABs, demonstrating the potential of this corrosion inhibition mechanism for ZnO and AM in alkaline solutions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

High energy efficiency of Al-based anodes for Al-air battery by simultaneous addition of Mn and Sb

Xuan Liu et al.

Summary: The Al-Mn-Sb anode exhibits high discharge voltage and peak power density, with a small degree of polarization at high discharge rate. It also has high energy density and considerable anodic utilization.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Synergistic effect of 8-aminoquinoline and ZnO as hybrid additives in alkaline electrolyte for Al-air battery

Xiaohui Li et al.

Summary: The study found that the hybrid additives of 8-aminoquinoline and zinc oxide can effectively inhibit the self-corrosion of commercial AA5052 Al alloy anode, which significantly improves the electrochemical activity of Al anode and increases the anodic utilization rate.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Physical

Solvothermal synthesis of functionalized carbon dots from amino acid as an eco-friendly corrosion inhibitor for copper in sulfuric acid solution

Yu Zhang et al.

Summary: Novel N-doped carbon dots (N-CDs) were synthesized and investigated for their inhibition performance on copper, showing high suppression efficiency. The interaction between N-CDs and copper substrate, as well as the anticorrosion mechanism, were explored in detail through various techniques. The aim of the study is to explore eco-friendly and efficient corrosion inhibitor materials for metal protection.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Improvement of electrochemical performance with amphoteric surfactants for Al anode of Al-air battery in alkaline system

Yongxin Zhu et al.

Summary: The study shows that the amphoteric surfactants, BS and BS-12, act as effective inhibitors in 4 M NaOH for Al-air battery, suppressing self-corrosion of the Al alloy anode and improving anode utilization efficiency. The action mechanism of the surfactants is proposed based on their different molecular structures.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Chemistry, Physical

Aluminum-air batteries: A review of alloys, electrolytes and design

Robert Buckingham et al.

Summary: Research on high theoretical energy density metal battery anode materials, such as aluminum in Al-air batteries, has been ongoing for several decades. Despite the attractive properties of aluminum such as light weight and low cost, commercialization has been impeded by challenges such as aluminum hydroxide surface barrier formation, high corrosion rate, and self-discharge susceptibility. Many studies have explored the use of alloying elements to address these issues in aqueous electrolytes.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Engineering, Environmental

A novel approach for copper protection: UV light triggered preparation of the click-assembled film on copper surface

Kai Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Inhibition effect and mechanism of inorganic-organic hybrid additives on three-dimension porous aluminum foam in alkaline Al-air battery

Hao Jiang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Engineering, Environmental

Understanding the synergistic effect of alkyl polyglucoside and potassium stannate as advanced hybrid corrosion inhibitor for alkaline aluminum-air battery

Shengan Wu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Excellent performance of aluminium anode based on dithiothreitol additives for alkaline aluminium/air batteries

Hanxue Yang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

The sandwich-like structures of polydopamine and 8-hydroxyquinoline coated graphene oxide for excellent corrosion resistance of epoxy coatings

Yanning Chen et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Review Electrochemistry

Recent Developments for Aluminum-Air Batteries

Ryohei Mori

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Add to Collection

Article Electrochemistry

Effect of Agar as Electrolyte Additive on the Aluminum-Air Batteries

Woo-Hyuk Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic effect of potassium iodide and sodium dodecyl sulfonate on the corrosion inhibition of carbon steel in HCl medium: a combined experimental and theoretical investigation

Jianhong Tan et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

Synergistic effect between glutamic acid and rare earth cerium (III) as corrosion inhibitors on AA5052 aluminum alloy in neutral chloride medium

Chong Zhu et al.

IONICS (2019)

Add to Collection

Article Chemistry, Physical

Experimental and theoretical investigation on calcium oxide and L-aspartic as an effective hybrid inhibitor for aluminum-air batteries

Q. X. Kang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Effect of nonionic surfactant as an electrolyte additive on the performance of aluminum-air battery

M. A. Deyab

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic Corrosion Inhibition Effect of Molybdate and Phosphate Ions for Anodic Oxidation Film Formed on 2024 Aluminum Alloy

Wenbo Wang et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2019)

Add to Collection

Article Chemistry, Physical

Modified alkaline electrolyte with 8-hydroxyquinoline and ZnO complex additives to improve Al-air battery

Chong Zhu et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Inhibitive effect of quaternary ammonium-type surfactants on the self-corrosion of the anode in alkaline aluminium-air battery

Yong Liu et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Advanced Technologies for High-Energy Aluminum-Air Batteries

Jaechan Ryu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

An All-Solid-State Fiber-Shaped Aluminum-Air Battery with Flexibility, Stretchability, and High Electrochemical Performance

Yifan Xu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Physical

Stability of trianionic curcumin enhanced by gemini alkyl O-Glucosides and alkyl trimethyl ammonium halides mixed micelles

Jin Feng et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)

Add to Collection

Article Chemistry, Analytical

Investigation of the electrochemical behaviour of AA1050 aluminium alloy in aqueous alkaline solutions using Dynamic Electrochemical Impedance Spectroscopy

Joanna Wysocka et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2016)

Add to Collection

Article Chemistry, Physical

Synergistic effects of carboxymethyl cellulose and ZnO as alkaline electrolyte additives for aluminium anodes with a view towards Al-air batteries

Jie Liu et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and theoretical investigation on corrosion inhibition of AA5052 aluminium alloy by L-cysteine in alkaline solution

Dapeng Wang et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

Add to Collection

Article Chemistry, Physical

Electrochemical and DFT studies of quinoline derivatives on corrosion inhibition of AA5052 aluminium alloy in NaCl solution

Dapeng Wang et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Performance of AA5052 alloy anode in alkaline ethylene glycol electrolyte with dicarboxylic acids additives for aluminium-air batteries

DaPeng Wang et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Evaluation of AA5052 alloy anode in alkaline electrolyte with organic rare-earth complex additives for aluminium-air batteries

Dapeng Wang et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Molecular dynamics simulation of inhibition mechanism of 3,5-dibromo salicylaldehyde Schiff's base

Si-Wei Xie et al.

COMPUTATIONAL AND THEORETICAL CHEMISTRY (2015)

Add to Collection

Article Electrochemistry

Evaluation of an Alkaline Electrolyte System for Al-Air Battery

Zegao Sun et al.

ECS ELECTROCHEMISTRY LETTERS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Degradability of aluminum in acidic and alkaline solutions

I. Boukerche et al.

CORROSION SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

In situ inhibitor synthesis from admixture of benzaldehyde and benzene-1,2-diamine along with FeCl3 catalyst as a new corrosion inhibitor for mild steel in 0.5 M sulphuric acid

Sh. Pournazari et al.

CORROSION SCIENCE (2013)

Add to Collection

Article Chemistry, Applied

Novel Amide-Based Cationic Surfactants as Efficient Corrosion Inhibitors for Carbon Steel in HCl and H2SO4 media

A. Yildirim et al.

JOURNAL OF SURFACTANTS AND DETERGENTS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series - Part III. Immersion time effects and theoretical studies

Mohammed A. Amin et al.

CORROSION SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Inhibition by tetradecylpyridinium bromide of the corrosion of aluminium in hydrochloric acid solution

Xianghong Li et al.

CORROSION SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

High efficiency corrosion inhibitor 8-hydroxyquinoline and its synergistic effect with sodium dodecylbenzenesulphonate on AZ91D magnesium alloy

H. Gao et al.

CORROSION SCIENCE (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Novel package for inhibition of aluminium corrosion in alkaline solutions

A. M. Abdel-Gaber et al.

MATERIALS CHEMISTRY AND PHYSICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

The effects of surface treatment and stannate as an electrolyte additive on the corrosion and electrochemical performances of pure aluminum in an alkaline methanol-water solution

X. X. Zeng et al.

MATERIALS CHEMISTRY AND PHYSICS (2010)

Add to Collection

Review Materials Science, Multidisciplinary

The aluminum chemistry and corrosion in alkaline solutions

Jinsuo Zhang et al.

JOURNAL OF NUCLEAR MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation of inhibitive action of some quaternary N-heterocyclic compounds on the corrosion of Al-Cu alloy in hydrochloric acid

Ehteram A. Noor

MATERIALS CHEMISTRY AND PHYSICS (2009)

Add to Collection

Article Electrochemistry

High effective organic corrosion inhibitors for 2024 aluminium alloy

S. V. Lamaka et al.

ELECTROCHIMICA ACTA (2007)

Add to Collection

Article Electrochemistry

Quantum chemical approach of corrosion inhibition

N Khalil

ELECTROCHIMICA ACTA (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.