☆ 4.8 Article

Hard carbon anodes for sodium-ion batteries: Dependence of the microstructure and performance on the molecular structure of lignin

JOURNAL OF POWER SOURCES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Engineering of Sodium-Ion Batteries: Opportunities and Challenges

Lina Zhao et al.

Summary: This article discusses the advantages of sodium-ion batteries (SIBs) as an alternative to lithium-ion batteries (LIBs) in renewable energy storage technology. It provides insights into the application prospects, commercial achievements, and challenges of SIBs.

ENGINEERING (2023)

Add to Collection

Article Chemistry, Physical

Micro-nano Na3V2(PO4)3/C derived from metal-organic frameworks for high performance sodium ion batteries

Hongxia Chen et al.

Summary: Hierarchical porous micro-nano NVP/C materials were successfully prepared using a metal-organic frameworks (MOFs) precursor, which exhibit a unique 3D highly conductive network and high specific surface area. The materials show excellent rate capability and cycle life, providing a promising pathway for the application of MOFs in battery materials and promoting the development of sodium ion batteries in large-scale energy storage systems.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Engineering, Environmental

Regulation of surface oxygen functional groups and pore structure of bamboo-derived hard carbon for enhanced sodium storage performance

Tianyue Xu et al.

Summary: This study introduces carbonyl groups and closed micropores into bamboo-derived hard carbon materials to enhance sodium ion storage performance. Carbonyl groups enhance reversible sodium adsorption in the sloping region, while closed micropores are beneficial for sodium ion storage in the low-voltage plateau region. The introduction of carbonyl groups does not increase the specific surface area or deteriorate the initial Coulombic efficiency.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Enzymatic Hydrolysis Lignin-Derived Porous Carbons through Ammonia Activation: Activation Mechanism and Charge Storage Mechanism

Wenbin Jian et al.

Summary: In this study, nitrogen-doped lignin-derived porous carbon (NLPC) was prepared as electrode materials for electrochemical capacitors (ECs) using enzymatic hydrolysis lignin. By comparing the surface capacitance with different electrolytes, it was found that NLPC significantly improved the energy density.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Changes of porosity of hard carbons during mechanical treatment and the relevance for sodium-ion anodes

Ivan K. Ilic et al.

Summary: Sodium-ion batteries have attracted attention as an alternative to lithium-ion batteries, with hard carbon being a promising material for sodium storage. However, the porosity of hard carbon can be influenced by ball milling, affecting the reversible sodium storage capacity.

CARBON (2022)

Add to Collection

Article Chemistry, Physical

Direct carbonization of sodium lignosulfonate through self-template strategies for the synthesis of porous carbons toward supercapacitor applications

Xiaoshan Zhang et al.

Summary: This study presents a novel approach for the synthesis of lignin-derived porous carbon materials using alkalized sodium lignosulfonate as a precursor. The introduction of alkaline metal ions in the precursor plays a crucial role as a template for the generation of porous carbon structures. This work provides a new paradigm for the transformation of lignin into porous carbon electrodes for future supercapacitor applications.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Chemistry, Applied

Ethanol organosolv lignin from different agricultural residues: Toward basic structural units and antioxidant activity

Yuanyuan Sheng et al.

Summary: The research investigated the antioxidant activities of lignin obtained from inexpensive or residual sources, finding that lignin antioxidants can scavenge free radicals and reduce oxidants. The main contributors to these lignins' antioxidant activity were phenolic hydroxyl groups, as indicated by the high correlation between antioxidant capacity and total phenol content.

FOOD CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Synthesis and photoinitiation properties of lignin model compounds

Yujie Qi et al.

Summary: Lignin model compounds containing C alpha-carbonyl beta-O-4 structure unit were synthesized and characterized, and their photoinitiation efficiency was evaluated. F4 showed the best performance as a one-component photoinitiator, equivalent to a commercial two-component system. The photolysis mechanism of F4 and the generated active species under light irradiation were also identified.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Chemistry, Analytical

Hard carbon derived for lignin with robust and low-potential sodium ion storage

Minghao Chen et al.

Summary: The study prepared hard carbon materials derived from lignin by controlling carbonization temperature for sodium ion batteries, showing high initial Coulomb efficiency and reversible discharge capacity, suggesting a potential application of biomass carbon materials in SIBs.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Multidisciplinary Sciences

A cellulose-derived supramolecule for fast ion transport

Qi Dong et al.

Summary: In this study, a scalable and cost-effective synthesis method is reported for cellulose-derived supramolecules with high ionic conductivity and potential applications.

SCIENCE ADVANCES (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Developing High-Performance Metal Selenides for Sodium-Ion Batteries

Zhiqiang Hao et al.

Summary: This review analyzes the sodium-storage mechanisms of different metal selenides and discusses the specific challenges and corresponding modification strategies for metal selenides as sodium-ion battery anodes. Recent advances and potential research directions are also presented. The review aims to provide constructive comments on the optimization and large-scale application of high-performance metal selenide-based anodes for sodium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis of high quality hard carbon anode from Eucalyptus wood for sodium-ion batteries

Jinyu Liu et al.

Summary: This study reports a hard carbon material derived from Eucalyptus wood for Na-ion battery anodes. The material exhibits high initial Columbic efficiency, moderate carbon yield, and satisfactory electrochemical performance. The hierarchical porous structure of the material is inherited from the natural holey structure of the wood. By optimizing the open and closed pores through adjustment of the pyrolysis temperature, the hard carbon obtained shows high specific capacity and good capacity retention. The material is promising for designing Na-ion battery anodes with comprehensive merits.

CHEMICAL PAPERS (2022)

Add to Collection

Article Chemistry, Physical

Towards enhanced sodium storage of hard carbon anodes: Regulating the oxygen content in precursor by low-temperature hydrogen reduction

Mingxin Song et al.

Summary: The oxygen content of precursors plays a crucial role in regulating the microstructures of hard carbon anodes for sodium-ion batteries. Decreasing the oxygen content while maintaining stability of crosslinking structures can promote closure of open pores and alignment of carbon layers, leading to improved performance. The optimal sample with low specific surface area and high proportion of pseudo-graphitic domains exhibited high reversible sodium storage capacity and provided sufficient diffusion channels for Na+ ions intercalation and pore-filling.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Microwave pyrolysis of herb residue for syngas production with in-situ tar elimination and nitrous oxides controlling

Jian Li et al.

Summary: Microwave pyrolysis integrated with in-situ reforming is a promising method for clean syngas production from herb residue, with microwave showing more enhancement on tar elimination than conventional heating. By adjusting microwave heating, reaction temperature and catalyst types, the performance of tar elimination and nitrous oxides control can be improved efficiently.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Controlling intercalation sites of hard carbon for enhancing Na and K storage performance

Stevanus Alvin et al.

Summary: Controlling the intercalation sites in cellulose-derived hard carbon can enhance the specific capacities in sodium-ion batteries and potassium-ion batteries. The increased percentage of pseudo-graphitic regions could serve as a rational guide for designing high-performance anodes.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Engineering hard carbon with high initial coulomb efficiency for practical sodium-ion batteries

Bin Yang et al.

Summary: This study developed an efficient solvothermal stabilization method to fabricate hard carbon spheres with high carbon yield, showing high capacity, enhanced initial coulombic efficiency, and long cycle stability as anodes for sodium-ion batteries. When coupled with a specific cathode electrode, the full cell exhibited high ICE and excellent stability.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Carbon nanosheets derived from reconstructed lignin for potassium and sodium storage with low voltage hysteresis

Keren Jiang et al.

Summary: This study successfully reconstructed lignin by partially tailoring the side chains, resulting in carbonized reconstructed lignin with significantly fewer defects, oxygen functionalities, and micropores. The reconstructed lignin delivers notably higher capacity at low-potential range, improved performance at high current density, and reduces voltage hysteresis between discharge and charge processes.

NANO RESEARCH (2021)

Add to Collection

Article Energy & Fuels

Design of Multilayered Porous Aluminum Nitride for Supercapacitor Applications

Shuhua Hao et al.

Summary: For the first time, multilayered porous AlN materials have been synthesized using 2D carbon nitride organic materials as a template, showing excellent specific capacitance and cycling performance. AlN symmetric supercapacitors fabricated with a neutral electrolyte exhibit high energy and power density, along with excellent cycle performance and the ability to power a light-emitting diode lamp, suggesting significant potential for applications in microelectronic devices.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Applied

Carbonization of mesocarbon microbeads prepared from mesophase pitch with different anisotropic contents and their application in lithium-ion batteries

Xin Gong et al.

Summary: The relationship between the chemical compositions of green mesocarbon microbeads (GMCMBs) and the electrochemical behavior of carbonized mesocarbon microbeads (CMCMBs) for lithium-ion batteries was investigated. GMCMBs with different anisotropic contents were prepared from mesophase pitch and carbonized, showing different structural characteristics and electrochemical performances. The study revealed that higher anisotropic content in GMCMBs led to a more ordered structure and higher initial coulombic efficiency, while lower anisotropic content resulted in higher porosity and disorder, leading to higher reversible capacity and superior rate performance.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Hard carbon porosity revealed by the adsorption of multiple gas probe molecules (N2, Ar, CO2, O2 and H2)

Adrian Beda et al.

Summary: The porosity of hard carbon materials is commonly evaluated by nitrogen adsorption, but this study found that a series of complementary gases such as N2, Ar, CO2, O2 and H2 can provide a more comprehensive understanding of the pore structure of hard carbons, with O2 showing particularly high adsorbed volumes.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Agricultural Engineering

Enzymatic hydrolysis of lignin by ligninolytic enzymes and analysis of the hydrolyzed lignin products

Sitong Zhang et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

NaOH-Aided Sulfolane Pretreatment for Effective Fractionation and Utilization of Willow (Salix matsudana cv. Zhuliu)

Lei Zhong et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Hard carbon derived from waste tea biomass as high-performance anode material for sodium-ion batteries

Linyuan Pei et al.

IONICS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Recent progress in plant-derived hard carbon anode materials for sodium-ion batteries: a review

Peng Yu et al.

RARE METALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Novel green and cost-effective preparation of acetylated lignin at high temperature without further separation

Liang Xia et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Review Thermodynamics

A review of lithium ion battery failure mechanisms and fire prevention strategies

Qingsong Wang et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Structural characterization of lignin from D. sinicus by FTIR and NMR techniques

Zhengjun Shi et al.

GREEN CHEMISTRY LETTERS AND REVIEWS (2019)

Add to Collection

Article Chemistry, Physical

Regulating Pore Structure of Hierarchical Porous Waste Cork-Derived Hard Carbon Anode for Enhanced Na Storage Performance

Yuqi Li et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Lithium-ion batteries: outlook on present, future, and hybridized technologies

Taehoon Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

A SAXS outlook on disordered carbonaceous materials for electrochemical energy storage

Damien Saurel et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Intercalation chemistry of graphite: alkali metal ions and beyond

Yuqi Li et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Sodium-ion battery anodes: Status and future trends

Wenli Zhang et al.

ENERGYCHEM (2019)

Add to Collection

Article Chemistry, Physical

Sodium-Ion Batteries: From Academic Research to Practical Commercialization

Jianqiu Deng et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Rice husk-derived hard carbons as high-performance anode materials for sodium-ion batteries

Qiaoqiao Wang et al.

CARBON (2018)

Add to Collection

Review Chemistry, Physical

From Charge Storage Mechanism to Performance: A Roadmap toward High Specific Energy Sodium-Ion Batteries through Carbon Anode Optimization

Damien Saurel et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Carbon with Expanded and Well-Developed Graphene Planes Derived Directly from Condensed Lignin as a High-Performance Anode for Sodium-Ion Batteries

Dohyeon Yoon et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Thermodynamics

Algae pyrolytic poly-generation: Influence of component difference and temperature on products characteristics

Wei Chen et al.

ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Dual-Channel, Molecular-Sieving Core/Shell ZIF@MOF Architectures as Engineered Fillers in Hybrid Membranes for Highly Selective CO2 Separation

Zhuonan Song et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Synthesis of hard carbon from argan shells for Na-ion batteries

Mouad Dahbi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Instruments & Instrumentation

Performance on absolute scattering intensity calibration and protein molecular weight determination at BL16B1, a dedicated SAXS beamline at SSRF

Jianrong Zeng et al.

JOURNAL OF SYNCHROTRON RADIATION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Outlook on Lithium Ion Battery Technology

Arumugam Manthiram

ACS CENTRAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Free-standing fluorine and nitrogen co-doped graphene paper as a high-performance electrode for flexible sodium-ion batteries

Haoran An et al.

CARBON (2017)

Add to Collection

Article Chemistry, Physical

Improving the deconvolution and interpretation of XPS spectra from chars by ab initio calculations

Matthew Smith et al.

CARBON (2016)

Add to Collection

Article Materials Science, Multidisciplinary

SnSex flowerlike composites as anode materials for sodium ion batteries

Zhian Zhang et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Chemistry, Physical

Hard Carbon Microtubes Made from Renewable Cotton as High-Performance Anode Material for Sodium-Ion Batteries

Yunming Li et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Applied

Hard carbon derived from cellulose as anode for sodium ion batteries: Dependence of electrochemical properties on structure

V. Simone et al.

JOURNAL OF ENERGY CHEMISTRY (2016)

Add to Collection

Article Chemistry, Physical

A waste biomass derived hard carbon as a high-performance anode material for sodium-ion batteries

Pin Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Physical

Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries

Lifen Xiao et al.

NANO ENERGY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage

Dipan Kundu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Review Chemistry, Physical

Lithium and lithium ion batteries for applications in microelectronic devices: A review

Yuxing Wang et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Review Chemistry, Physical

Update on anode materials for Na-ion batteries

Hongyan Kang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid-Assisted Synthesis of Microporous Carbon Nanosheets for Use in High Rate and Long Cycle Life Supercapacitors

Zhen-Yu Jin et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Engineering, Environmental

Adsorption of dimethyl ether (DME) on zeolite molecular sieves

Jai B. Lad et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Environmental Sciences

Study on biodegradation process of lignin by FTIR and DSC

Yang Liu et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2014)

Add to Collection

Article Polymer Science

Thermal degradation of softwood lignin and hardwood lignin by TG-FTIR and Py-GC/MS

Jing Zhao et al.

POLYMER DEGRADATION AND STABILITY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Van der Waals density functional study of the energetics of alkali metal intercalation in graphite

Zhaohui Wang et al.

RSC ADVANCES (2014)

Add to Collection

Review Chemistry, Physical

A review on the key issues for lithium-ion battery management in electric vehicles

Languang Lu et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

In Situ X-ray Study of the Solid Electrolyte Interphase (SEI) Formation on Graphene as a Model Li-ion Battery Anode

Sudeshna Chattopadhyay et al.

CHEMISTRY OF MATERIALS (2012)

Add to Collection

Article Agriculture, Multidisciplinary

Accurate and Reproducible Determination of Lignin Molar Mass by Acetobromination

Janne Asikkala et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2012)

Add to Collection

Article Chemistry, Analytical

Study on structure and pyrolysis behavior of lignin derived from corncob acid hydrolysis residue

Yanqin Huang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)

Add to Collection

Article Electrochemistry

A novel method for preparation of macroposous lithium nickel manganese oxygen as cathode material for lithium ion batteries

Xiaoya Wang et al.

ELECTROCHIMICA ACTA (2011)

Add to Collection

Article Chemistry, Analytical

FTIR study of pyrolysis products evolving from typical agricultural residues

Peng Fu et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2010)

Add to Collection

Article Energy & Fuels

Characteristics of hemicellulose, cellulose and lignin pyrolysis

Haiping Yang et al.

FUEL (2007)

Add to Collection

Article Energy & Fuels

Mechanism of palm oil waste pyrolysis in a packed bed

Haiping Yang et al.

ENERGY & FUELS (2006)

Add to Collection

Article Electrochemistry

The mechanisms of lithium and sodium insertion in carbon materials

DA Stevens et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

Article Electrochemistry

An in situ small-angle X-ray scattering study of sodium insertion into a nanoporous carbon anode material within an operating electrochemical cell

DA Stevens et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.