4.8 Article

Design of multi-layered gradient catalysts for efficient proton exchange membrane fuel cells

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Effects of various operating conditions and optimal ionomer-gradient distribution on temperature-driven water transport in cathode catalyst layer of PEMFC

Yiming Xu et al.

Summary: The temperature distribution plays a crucial role in water transport by phase-change-induced flow in the cathode catalyst layer. This study investigates the impact of operating temperature and inlet relative humidity on the relationship between capillary-driven flow and phase-change-induced flow. The results show that raising the operating temperature increases the dominance of phase-change-induced flow, while optimizing the catalyst layer gradient structure enhances the overall mass transport capability and output performance.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

Stable and high-performance N-micro/mesoporous carbon-supported Pt/Co nanoparticles-GDE for electrocatalytic oxygen reduction in PEMFC

Zeynab Abkar et al.

Summary: This research presents a novel and high-performance electrocatalyst for oxygen reduction reaction (ORR) by synthesizing N-micro/mesoporous carbon-supported Pt/Co nanoparticles. The prepared electrocatalyst exhibits desirable surface properties and chemical structure, enhancing the ORR kinetic. The ORR performance of Pt/Co-NC-GDE loaded on the gas diffusion electrode shows superior current density and power density compared to Pt/C-GDE, along with higher stability.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Engineering, Environmental

An ingenious design of nanoporous nafion film for enhancing the local oxygen transport in cathode catalyst layers of PEMFCs

Xiaojing Cheng et al.

Summary: This study successfully regulated the nanoscale distribution of the Nafion film using polyvinyl alcohol (PVA) as a sacrificial pore-forming agent, which reduced the oxygen transport resistance and improved the performance of fuel cells.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Effect of uniformity and surface morphology of Pt nanoparticles to enhance oxygen reduction reaction in polymer electrolyte membrane fuel cells

Su-yeong Lim et al.

Summary: Platinum (Pt)-based electrocatalysts supported by reduced graphene oxide (rGO) were fabricated under microwave-assisted polyol method. The relationship between the Pt NP morphology distribution and oxygen reduction reaction of catalysts was elucidated, highlighting the important role of size and inter-particle spacing on the Pt electrochemical catalytic performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Biochemistry & Molecular Biology

Hybrid Carbon Supports Composed of Small Reduced Graphene Oxide and Carbon Nanotubes for Durable Oxygen Reduction Catalysts in Proton Exchange Membrane Fuel Cells

Su-Jeong Bak et al.

Summary: Highly active and durable hybrid catalysts composed of small reduced graphene oxide and carbon nanotubes were prepared for oxygen reduction reaction in fuel cells. The catalysts exhibited excellent performance and stability, with the addition of carbon nanotubes further improving durability and electrical conductivity.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Article Biochemistry & Molecular Biology

Small Reduced Graphene Oxides for Highly Efficient Oxygen Reduction Catalysts

Su-Jeong Bak et al.

Summary: The study demonstrated highly efficient oxygen reduction catalysts composed of uniform Pt nanoparticles on small, reduced graphene oxides (srGO). The catalysts exhibited efficient surface reactions, large surface areas, high metal dispersions, and excellent oxygen reduction performance. Detailed investigations suggested that the chemical functionality and electrical conductivity greatly influenced the enhanced oxygen reduction efficiency of the catalysts.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Article Chemistry, Physical

Dual-layer catalyst layers for increased proton exchange membrane fuel cell performance

Yannick Garsany et al.

Summary: The use of a dual-layer cathode catalyst layer improves the performance of proton exchange membrane fuel cells by boosting maximum power regardless of carbon porosity directionality. At 25% relative humidity, a 20% performance boost is realized with dual-layer cathode CLs. Electrochemical impedance spectroscopy results show that dual-layer catalyst layers aid in water management and reduce kinetic activity losses of the Pt.

JOURNAL OF POWER SOURCES (2021)

Review Multidisciplinary Sciences

Advancements in cathode catalyst and cathode layer design for proton exchange membrane fuel cells

Yanyan Sun et al.

Summary: The high platinum loadings at the cathodes of proton exchange membrane fuel cells significantly increase the cost of these clean energy conversion devices. Recent developments focus on low- and non-platinum-based cathode catalysts and catalyst layers to address this issue. Advances in nanotechnologies and material sciences have led to the discovery of promising materials, including platinum-based alloys and platinum-group-metal-free catalysts, for more cost-effective solutions in the future.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Optimizing the Mass-Transfer Efficiency of a Microporous Layer for High-Performance Proton Exchange Membrane Fuel Cells

Liang Chen et al.

Summary: The use of carbon-based gel to create micron-scale ordered indentations on the microporous layer surface in fuel cells enhances mass transfer efficiency and water management, ultimately improving performance. The gel's high viscosity prevents slurry intrusion into pores, creating more space for rapid mass transfer in the gas diffusion layer.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Multidisciplinary Sciences

Designing the next generation of proton-exchange membrane fuel cells

Kui Jiao et al.

Summary: The rapid growth of proton-exchange membrane fuel cell technology is driving the demand for clean and sustainable global energy applications. Increasing PEMFC power density is critical for commercialization, with ambitious goals set globally. Future high-power-density PEMFCs will focus on improving membrane electrode assembly components, water and thermal management, and materials.

NATURE (2021)

Article Chemistry, Multidisciplinary

Simple and high-yield preparation of carbon-black-supported ∼1 nm platinum nanoclusters and their oxygen reduction reactivity

Tokuhisa Kawawaki et al.

Summary: A simple method was established for the size-selective synthesis of ligand-protected platinum nanoclusters with similar particle size, achieving high yield. The ligand-protected Pt nanoclusters exhibited higher ORR mass activities on carbon black compared to commercial nanoparticles, showing improved durability.

NANOSCALE (2021)

Article Chemistry, Physical

Controllable synthesis of Fe-N4 species for acidic oxygen reduction

Xuecheng Yan et al.

CARBON ENERGY (2020)

Article Energy & Fuels

Impact of manufacturing processes on proton exchange membrane fuel cell performance

Samaneh Shahgaldi et al.

APPLIED ENERGY (2018)

Article Thermodynamics

Cathode catalyst layer design with gradients of ionomer distribution for proton exchange membrane fuel cells

Samaneh Shahgaldi et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Article Electrochemistry

Cathode Loading Impact on Voltage Cycling Induced PEMFC Degradation: A Voltage Loss Analysis

Gregor S. Harzer et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Editorial Material Chemistry, Physical

Boosting Fuel Cell Performance with Accessible Carbon Mesopores

Venkata Yarlagadda et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Physical

The Priority and Challenge of High-Power Performance of Low-Platinum Proton-Exchange Membrane Fuel Cells

Anusorn Kongkanand et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Article Chemistry, Multidisciplinary

Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells

Binghong Han et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Physical

Unexplained transport resistances for low-loaded fuel-cell catalyst layers

Adam Z. Weber et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Electrochemistry

Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance

Jon P. Owejan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Chemistry, Physical

Analysis and modeling of PEMFC degradation: Effect on oxygen transport

Shinji Jomori et al.

JOURNAL OF POWER SOURCES (2012)

Article Chemistry, Physical

Optimal catalyst layer structure of polymer electrolyte membrane fuel cell

Doo Sung Hwang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Physics, Multidisciplinary

Theory, Synthesis, and Oxygen Reduction Catalysis of Fe-Porphyrin-Like Carbon Nanotube

Duck Hyun Lee et al.

PHYSICAL REVIEW LETTERS (2011)

Article Chemistry, Physical

Performance analysis of a PEM fuel cell cathode with multiple catalyst layers

M. Srinivasarao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

Effect of Nafion® gradient in dual catalyst layer on proton exchange membrane fuel cell performance

K. -H. Kim et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Chemistry, Physical

Effect of loading and distributions of Nafion ionomer in the catalyst layer for PEMFCs

Dokyol Lee et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Chemistry, Physical

PEM fuel cell electrocatalyst durability measurements

Rod L. Borup et al.

JOURNAL OF POWER SOURCES (2006)

Article Electrochemistry

Water management in cathode catalyst layers of PEM fuel cells - A structure-based model

M Eikerling

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Article Electrochemistry

Optimum Nafion content in PEM fuel cell electrodes

G Sasikumar et al.

ELECTROCHIMICA ACTA (2004)

Article Chemistry, Physical

Effect of pore structure of catalyst layer in a PEMFC on its performance

YG Yoon et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2003)

Article Chemistry, Physical

A multi-layer structured cathode for the PEMFC

YG Yoon et al.

JOURNAL OF POWER SOURCES (2003)