Related references
Note: Only part of the references are listed.Defects and failure types of solid insulation in gas-insulated switchgear: In situ study and case analysis
Yunqi Xing et al.
HIGH VOLTAGE (2022)
Insulating materials for realising carbon neutrality: Opportunities, remaining issues and challenges
Chuanyang Li et al.
HIGH VOLTAGE (2022)
Mechanical, Low Velocity Impact, Fatigue and Tribology Behaviour of Silane Grafted Aramid Fibre and Nano-silica Toughened Epoxy Composite
Pratibha Dharmavarapu et al.
SILICON (2021)
Revealing the active sites of the structured Ni-based catalysts for one-step CO2/CH4 conversion into oxygenates by plasma-catalysis
Jiangwei Li et al.
JOURNAL OF CO2 UTILIZATION (2021)
Temperature-independent, nonoxidative methane conversion in nanosecond repetitively pulsed DBD plasma
Xiaoxiao Chen et al.
SUSTAINABLE ENERGY & FUELS (2021)
In-situ polymerization and covalent modification on aramid fiber surface via direct fluorination for interfacial enhancement
Junwei Lv et al.
COMPOSITES PART B-ENGINEERING (2020)
Surface modification of aramid fibers by amino functionalized silane grafting to improve interfacial property of aramid fibers reinforced composite
Chuyuan Jia et al.
POLYMER COMPOSITES (2020)
Flame retardant efficiency of modified para-aramid fiber synergizing with ammonium polyphosphate on PP/EPDM
Kai Wu et al.
POLYMER DEGRADATION AND STABILITY (2020)
Study on interfacial adhesion of the aramid fibers/rubber matrix by grafting mercapto hyperbranched polysiloxane
Xuan Yang et al.
POLYMER TESTING (2020)
Improving UV Resistance of Aramid Fibers by Simultaneously Synthesizing TiO2 on Their Surfaces and in the Interfaces Between Fibrils/Microfibrils Using Supercritical Carbon Dioxide
Hui Sun et al.
POLYMERS (2020)
Supercritical CO2-induced nondestructive coordination between ZnO nanoparticles and aramid fiber with highly improved interfacial-adhesion properties and UV resistance
Luwei Zhang et al.
APPLIED SURFACE SCIENCE (2020)
Toward high-performance nanofibrillated cellulose/aramid fibrid paper-based composites via polyethyleneimine-assisted decoration of silica nanoparticle onto aramid fibrid
Fan Xie et al.
CARBOHYDRATE POLYMERS (2020)
Influence of Low-Pressure RF Plasma Treatment on Aramid Yarns Properties
Alicja Nejman et al.
MOLECULES (2020)
Lightweight Composites through Imidazolium Ionic Liquid Enhanced Aramid-Epoxy Resin Interactions
Carolina Moraes et al.
ACS APPLIED POLYMER MATERIALS (2020)
Atmospheric-pressure pulsed plasma actuators for flow control: shock wave and vortex characteristics
Cheng Zhang et al.
PLASMA SOURCES SCIENCE & TECHNOLOGY (2019)
Atmospheric pressure plasmas and direct fluorination treatment of A2O3-filled epoxy resin: A comparison of surface charge dissipation
Cheng Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Enhancing fatigue properties of styrene butadiene rubber composites by improving interface adhesion between coated aramid fibers and matrix
Jincheng Zhong et al.
COMPOSITES PART B-ENGINEERING (2019)
Study on atmospheric air glow discharge plasma generation based on multiple potentials and aramid fabric surface modification
Luxiang Zhao et al.
PLASMA PROCESSES AND POLYMERS (2019)
Preparation of Silver-Plated Para-Aramid Fiber by Employing Low-Temperature Oxygen Plasma Treatment and Dopamine Functionalization
Zhenhua Sun et al.
COATINGS (2019)
Improvement of adhesion of kevlar fabrics to epoxy by surface modification with acetic anhydride in supercritical carbon dioxide
Kong Haijuan et al.
POLYMER COMPOSITES (2019)
Reinforcing effect of aramid fibers on fatigue behavior of SBR/aramid fiber composites
Lianpeng Yin et al.
POLYMER TESTING (2019)
Fe3+ coordination induced selective fluorination of aramid fiber to suppress surface chain scission behavior and improve surface polarity
Zheng Cheng et al.
APPLIED SURFACE SCIENCE (2018)
Hydrophilicity modification of aramid fiber using a linear shape plasma excited by nanosecond pulse
Hao Yuan et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Functionalized Aramid Fibers and Composites for Protective Applications: A Review
Prakash M. Gore et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Surface ammonification of the mutual-irradiated aramid fibers in 1,4-dichlorobutane for improving interfacial properties with epoxy resin
Fei Xie et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
The facile preparation of aramid insulation paper from the bottom-up nanofiber synthesis
Wenting Tian et al.
MATERIALS LETTERS (2017)
Plasma surface treatment to improve surface charge accumulation and dissipation of epoxy resin exposed to DC and nanosecond-pulse voltages
Cheng Zhang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
Mechanical characterization of fiber metal laminate based on aramid fiber reinforced polypropylene
N. G. Gonzalez-Canche et al.
COMPOSITE STRUCTURES (2017)
Estimation of aramid fiber/epoxy interfacial properties by fiber bundle tests and multiscale modeling considering the fiber skin/core structure
Guocheng Qi et al.
COMPOSITE STRUCTURES (2017)
Improved adhesion properties of poly-p-phenyleneterephthamide fibers with a rubber matrix via UV-initiated grafting modification
Rina Sa et al.
RSC Advances (2015)
Surface modification of poly(p-phenylene terephthalamide) fibers with HDI assisted by supercritical carbon dioxide
Kong Haijuan et al.
RSC ADVANCES (2015)
Hydrophobic treatment on polymethylmethacrylate surface by nanosecond-pulse DBDs in CF4 at atmospheric pressure
Cheng Zhang et al.
APPLIED SURFACE SCIENCE (2014)
Surface modification of Twaron aramid fiber by the atmospheric air plasma technique
M. A. Karim Biswas et al.
TEXTILE RESEARCH JOURNAL (2013)
Surface treatment of para-aramid fiber by argon dielectric barrier discharge plasma at atmospheric pressure
Ruxi Gu et al.
APPLIED SURFACE SCIENCE (2012)
Atmospheric plasmas for thin film deposition: A critical review
Delphine Merche et al.
THIN SOLID FILMS (2012)
Surface treatment of aramid fiber by air dielectric barrier discharge plasma at atmospheric pressure
Caixia Jia et al.
APPLIED SURFACE SCIENCE (2011)
The effect of oxygen-plasma treatment on Kevlar fibers and the properties of Kevlar fibers/bismaleimide composites
Min Su et al.
APPLIED SURFACE SCIENCE (2011)
Surface Treatment of Polyethylene Terephthalate Films Using DBD Excited by Repetitive Unipolar Nanosecond Pulses in Air at Atmospheric Pressure
Cheng Zhang et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2010)
Effects of Twaron fiber surface treatment by air dielectric barrier discharge plasma on the interfacial adhesion in fiber reinforced composites
Caixia Jia et al.
SURFACE & COATINGS TECHNOLOGY (2010)
The Ultrasound-Based Interfacial Treatment of Aramid Fiber/Epoxy Composites
Huijuan Dong et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Improvement of interfacial adhesion for plasma-treated aramid fiber-reinforced poly(phthalazinone ether sulfone ketone) composite and fiber surface aging effects
Ping Chen et al.
SURFACE AND INTERFACE ANALYSIS (2009)
Effect of plasma treatment of Kevlar fabric on the tribological behavior of Kevlar fabric/phenolic composites
Fang Guo et al.
TRIBOLOGY INTERNATIONAL (2009)
Experimental study on repetitive unipolar nanosecond-pulse dielectric barrier discharge in air at atmospheric pressure
Shao Tao et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)
Characterization of the surface changes and the aging effects of low-pressure nitrogen plasma treatment in a polyurethane film
M. R. Sanchis et al.
POLYMER TESTING (2008)
Surface modification of aramid fiber by air DBD plasma at atmospheric pressure with continuous on-line processing
Min Xi et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Short-beam and three-point-bending tests for the study of shear and flexural properties in unidirectional-fiber-reinforced epoxy composites
E Sideridis et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Surface modifications and its effect on the interfacial properties of model aramid-fibre/epoxy composites
RJ Day et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Share Paper
