☆ 4.6 Article

Low-Temperature and Ambient Processed All Inorganic CsPbBr3 Perovskite Solar Cells: Stability Enhancement with AZO as an Electron Transport Layer

JOURNAL OF PHYSICAL CHEMISTRY C (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

The thermodynamical and optical properties of surface bromine vacancy in two-dimensional CsPbBr3: A first principles study

Beichen Liu et al.

Summary: This study investigates the properties of surface Br vacancy in 2D CsPbBr3 using first principles methods, and specifically studies the optical transitions associated with the vacancy. The results show that as the thickness of 2D CsPbBr3 increases, the defect level and charge transition energy level become shallower. However, the surface Br vacancy may not have a significant impact on the luminescence spectrum due to strong lattice relaxation.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Highly efficient and stable ZnO-based MA-free perovskite solar cells via overcoming interfacial mismatch and deprotonation reaction

Gengling Liu et al.

Summary: In this study, aluminium-doped zinc oxide modified by polydopamine is found to be an effective electron transport layer for perovskite solar cells. It optimizes interfacial contact, inhibits detrimental interfacial reactions, and passivates surface defects. It also induces the growth of perovskite grains, releases lattice strain, and inhibits deprotonation reactions, resulting in high power conversion efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Origin of open-circuit voltage reduction in high-mobility perovskite solar cells

Hyuna Lee et al.

Summary: This article provides a new insight into the charge-carrier mobility in perovskite solar cells using experimentally calibrated numerical simulations. It is found that increasing the mobility substantially improves the short-circuit current, but simultaneously decreases the open-circuit voltage, resulting in efficiency roll-off in the high-mobility regime. The increased bending of potential profiles and decreased electric field due to carrier diffusion are identified as the key mechanisms behind this behavior, providing a theoretical guideline for material and device engineering.

SOLAR ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Attributes of High-Performance Electron Transport Layers for Perovskite Solar Cells on Flexible PET versus on Glass

Marwa Dkhili et al.

Summary: This study investigates the application of different types of ETLs in flexible solar cells, finding that ETLs specifically developed for plastic substrates are needed to achieve high efficiency. Among all the ETLs, the ZnO/SnO2 double layer exhibits the highest average power conversion efficiency. Additionally, single ETLs made of SnO2 nanoparticles are more stable and efficient than those made from a liquid precursor. The study also highlights the importance of high shunt resistances and lower recombination currents in achieving high efficiency in flexible devices. Moreover, the wetting behavior of the ETL surfaces significantly affects the performance of the device, with better wetting leading to higher-quality layers and interfaces.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Energy & Fuels

High-purity synthesis of all-inorganic CsPbBr3 perovskite powder assisted by solubilizing organic ligand and its application to perovskite solar cells

Hyeon Ju Tak et al.

Summary: All-inorganic perovskites have high thermal stabilities and show promising performances for optoelectronic applications. This study presents a facile preparation method for all-inorganic CsPbBr3 perovskite powder, which demonstrates cost-effectiveness and high purity. The CsPbBr3 film prepared from this synthesized powder offers improved homogeneity and reduced defects, leading to higher power conversion efficiency and stability in perovskite solar cells.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Physics, Multidisciplinary

Fabrication and characterization of air-stable, highly efficient all-inorganic CsPbBr3 perovskite solar cell

Naba Kumar Rana et al.

Summary: Cesium lead bromide perovskite solar cells are promising photovoltaic devices with excellent environmental stability and low-cost fabrication method. By comparing different devices, the AZO-based solar cell shows higher efficiency and fill factor, and exhibits remarkable stability.

PHYSICA SCRIPTA (2022)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Revealing Charge Carrier Mobility and Defect Densities in Metal Halide Perovskites via Space-Charge-Limited Current Measurements

Vincent M. Le Corre et al.

Summary: Space-charge-limited current (SCLC) measurements are widely used to study charge carrier mobility and trap density in semiconductors, but their application to metal halide perovskites is complicated by the mixed ionic and electronic nature of these materials. The presence of mobile ions strongly affects the measurements, requiring a refined analysis and interpretation of SCLC. Pulsed SCLC, combined with drift-diffusion simulations, offers a reliable method for simultaneously extracting mobility, trap, and ion densities in perovskite semiconductors.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Slow Hot-Carrier Cooling Enabled by Uniformly Arranging Different-n-Value Nanoplates in Quasi-2D Perovskites through Long-Range Orbit-Orbit Interaction toward Enhancing Photovoltaic Actions

Jia Zhang et al.

Summary: This paper reports a slow hot-carriers cooling process enabled by uniformly arranging different-n-value nanoplates in quasi-2D perovskites. The long-range orbit-orbit interaction provides the necessary condition to enable the unusual long-order electron-lattice coupling for a slow hot-carrier cooling effect through energy-momentum dispersion curvature within the crystalline lattice. With the slow hot-carrier cooling and long-range orbit-orbit interaction, the quasi-2D perovskite demonstrates superior carrier transport shown by high fill-factor values (>80%) with reduced photovoltaic loss in solar cells.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Dielectric screening in perovskite photovoltaics

Rui Su et al.

Summary: Regulating the dielectric properties can decrease the defect capture probability in perovskite photovoltaic devices, leading to reduced surface recombination and weaker electron-phonon coupling, thereby boosting the power conversion efficiency.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

p-i-n Structured Semitransparent Perovskite Solar Cells with Solution-Processed Electron Transport Layer

Asim Guchhait et al.

Summary: Solution processed p-i-n structured semitransparent perovskite solar cells were developed in this study, with Al-doped ZnO showing superior optoelectronic performance and yielding a higher power conversion efficiency. Aluminum-doped zinc oxide nanoparticles were found to be effective as a buffer layer for enhancing the overall photovoltaic performance.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Optical features of PbBr2 semiconductor thin films for radiation attenuation application

O. G. Torres et al.

Summary: This work reports the synthesis and optical characterization of semiconductor thin film lead bromide (PbBr2) synthesized by thermal evaporation, discussing its potential applications in UV and ionizing radiation attenuation. Experimental studies using X-ray diffraction and scanning electron microscopy showed the quality of the samples, while diffuse reflectance and transmittance spectroscopy experiments revealed a weakly semiconductor optical gap of 3.5 eV, indicating potential applicability in medical diagnostic and treatment equipment design involving ionizing radiation. High transparency of the thin film was also confirmed, suggesting potential applications in microelectronic devices.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Review Energy & Fuels

Advancement in CsPbBr3 inorganic perovskite solar cells: Fabrication, efficiency and stability

Naveen Kumar et al.

Summary: Hybrid perovskite solar cells have significantly improved in power conversion efficiency since 2009, but suffer from instability issues. Cesium lead bromide inorganic perovskite can provide better stability, but commercial use is still limited due to lifetime constraints.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells

Jianjun Zhang et al.

Summary: By doping CsPbBr3 nanocrystals into perovskites, a bilateral interface modification was achieved which effectively suppressed defects and enhanced electron transport. The enhanced built-in electric field facilitated oriented migration of carriers within the perovskite, resulting in a power conversion efficiency exceeding 20% in the solar cells.

ADVANCED SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics

Saad Ullah et al.

Summary: In recent years, inorganic CsPbBr3-based perovskites have achieved significant progress in stability under harsh humid environments, but their power conversion efficiency still lags behind that of other hybrid perovskite materials.

MATERIALS ADVANCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Using Soft Polymer Template Engineering of Mesoporous TiO2 Scaffolds to Increase Perovskite Grain Size and Solar Cell Efficiency

Qing Lian et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

On the Origin of the Ideality Factor in Perovskite Solar Cells

Pietro Caprioglio et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Improving the performances of CsPbBr3solar cells fabricated in ambient condition

Beilei Yuan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Dominant effect of the grain size of the MAPbI3 perovskite controlled by the surface roughness of TiO2 on the performance of perovskite solar cells

Methawee Nukunudompanich et al.

CRYSTENGCOMM (2020)

Add to Collection

Article Chemistry, Physical

Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering

Xingyue Liu et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

All-Inorganic CsPbBr3 Perovskite Solar Cells with 10.45% Efficiency by Evaporation-Assisted Deposition and Setting Intermediate Energy Levels

Xin Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

A Highly Stable All-Inorganic CsPbBr3 Perovskite Solar Cell

Masood Mehrabian et al.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Advanced Modification of Perovskite Surfaces for Defect Passivation and Efficient Charge Extraction in Air-Stable CsPbBr3 Perovskite Solar Cells

Yang Ding et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Effective Control of the Growth and Photoluminescence Properties of CsPbBr3/Cs4PbBr6 Nanocomposites by Solvent Engineering

Wenkang Wang et al.

ACS OMEGA (2019)

Add to Collection

Article Chemistry, Physical

One-step solution deposition of CsPbBr3 based on precursor engineering for efficient all-inorganic perovskite solar cells

Dewei Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

A Design Based on a Charge-Transfer Bilayer as an Electron Transport Layer for Improving the Performance and Stability in Planar Perovskite Solar Cells

Shang-Hsuan Wu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Solar Cells with Inorganic Electron- and Hole-Transport Layers Exhibiting Long-Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air

Seongrok Seo et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Investigation of Al2O3 and ZrO2 spacer layers for fully printable and hole-conductor-free mesoscopic perovskite solar cells

Zheng Meng et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Air-Stable Direct Bandgap Perovskite Semiconductors: All-Inorganic Tin-Based Heteroleptic Halides A(x)SnCl(y)I(z) (A = Cs, Rb)

Jiangwei Li et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

Zhiyong Liu et al.

NANO-MICRO LETTERS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

Zhiyong Liu et al.

NANO-MICRO LETTERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Ellipsometric study of the complex optical constants of a CsPbBr3 perovskite thin film

Minglin Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Physics, Multidisciplinary

Switching excitonic recombination and carrier trapping in cesium lead halide perovskites by air

Yue Wang et al.

COMMUNICATIONS PHYSICS (2018)

Add to Collection

Review Chemistry, Physical

High-Bandgap Perovskite Materials for Multijunction Solar Cells

Terry Chien-Jen Yang et al.

JOULE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Inorganic Lead Halide Perovskite Single Crystals: Phase-Selective Low-Temperature Growth, Carrier Transport Properties, and Self-Powered Photodetection

Makhsud I. Saidaminov et al.

ADVANCED OPTICAL MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells

Chien-Hung Chiang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Aluminum-Doped Cesium Lead Bromide Perovskite Nanocrystals with Stable Blue Photoluminescence Used for Display Backlight

Ming Liu et al.

ADVANCED SCIENCE (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications

Yixin Zhao et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection

Article Chemistry, Physical

Bandgap-Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells

Rebecca J. Sutton et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Surface engineering of ZnO electron transporting layer via Al doping for high efficiency planar perovskite solar cells

Zong-Liang Tseng et al.

NANO ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Enhancement of Open-Circuit Voltage of Solution-Processed Cu2ZnSnS4 Solar Cells with 7.2% Efficiency by Incorporation of Silver

Asim Guchhait et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Article Energy & Fuels

Consensus stability testing protocols for organic photovoltaic materials and devices

Matthew O. Reese et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Sn-doped on microstructural and optical properties of ZnO thin films deposited by sol-gel method

Chien-Yie Tsay et al.

THIN SOLID FILMS (2008)

Add to Collection

Article Chemistry, Physical

Synthesis and photocatalytic activity of ZnO/ZnO2 cornposite

CC Hsu et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.