☆ 4.7 Article

Unexpected creep behavior in a rejuvenated metallic glass

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Comprehensive insights into the thermal and mechanical effects of metallic glasses via creep

Z. R. Xu et al.

Summary: The evolution of deformation and relaxation behaviors of a prototypical Cu46Zr46Al8 metallic glass under physical aging and cyclic loading was explored. A decrease in local defects and recoverable deformation units within the metallic glass were observed with increasing annealing time and cyclic numbers. The suppressed relaxation process can be gradually alleviated with increasing resuming time between two consecutive cycles, indicating a notable discrepancy between thermal treatment and mechanical treatment.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Ceramics

Ageing effect on nanoindentation creep behaviors of CuZrTiNb bulk metallic glass

Defeng Song et al.

Summary: This study investigates the room-temperature nanoindentation creep behaviors of as-cast and aged CuZrTiNb bulk metallic glasses, showing that ageing influences the hardness, creep displacement, and resistance to localized plastic deformation of the materials. Ageing decreases the resistance to localized plastic deformation but increases the creep resistance of current bulk metallic glass. The quantity of large holes decreases while that of small voids increases with ageing, as revealed by compliance and retardation spectra analysis.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture toughness of a rejuvenated β-Ti reinforced bulk metallic glass matrix composite

Devashish Rajpoot et al.

Summary: This study investigates the embrittlement of a beta-Ti dendrite reinforced Zr-based bulk metallic glass composite (BMGC) when cast in a large size, and examines the effectiveness of cryothermal cycling (CTC) treatment in restoring the mode I fracture toughness. The plasticity of CTC treated BMGC is estimated through nanoindentation tests and differential scanning calorimetry (DSC), and validated through compression tests. The study reveals that both as-cast embrittled BMGC and CTC treated BMGC exhibit brittleness, with 5 times lower notch toughness compared to their tougher counterpart. The absence of notch-tip plasticity in the CTC treated BMGC, despite indications of plasticity in nanoindentation and higher enthalpy of relaxation (Delta H-rel), is explained through reassessing the origin of pop-ins in nanoindentation tests and variations in chemical and topological short range ordering during CTC. The implications of these results for improving the fracture toughness of structurally relaxed BMGCs using CTC are discussed.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Manipulating internal flow units toward favorable plasticity in Zr-based bulk-metallic glasses by hydrogenation

Fuyu Dong et al.

Summary: This study manipulated internal flow units in bulk-metallic glasses through plasma-assisted hydrogenation to improve plasticity and induce structural relaxation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Strain-hardening under uniaxial tension in a rejuvenated bulk metallic glass

W. H. Zhou et al.

Summary: A rejuvenated Zr-based bulk metallic glass was tested in tension and exhibited strain-hardening behavior. The plastic strain at failure reached 0.9%, which is considered high for metallic glasses. Comparisons with other alloys showed that the hardening rate of the metallic glass decreases rapidly with increasing strain, limiting its tensile plastic strain to approximately 1%. Rejuvenation delayed early catastrophic failure and resulted in changes in the fracture surface morphology.

SCRIPTA MATERIALIA (2022)

Add to Collection

Article Engineering, Mechanical

Unraveling the microstructural heterogeneity and plasticity of Zr50Cu40Al10 bulk metallic glass by nanoindentation

K. Tao et al.

Summary: Understanding the microstructural heterogeneity of metallic glasses is crucial for understanding their physical and mechanical properties. Through structural relaxation and cold rolling, the state of metallic glasses can be modified, thereby altering their microstructural heterogeneity. The study shows that enhancing microstructural heterogeneity plays a significant role in tailoring the mechanical behavior of metallic glasses.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of physical aging and cyclic loading on power-law creep of high-entropy metallic glass

Langting Zhang et al.

Summary: The influence of physical aging and cyclic loading on the power-law creep mechanism of a La30Ce30Ni10Al20Co10 high-entropy metallic glass was investigated. The results revealed significant discrepancies between thermal treatment and mechanical treatment in terms of the creep mechanism.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of mechanically induced structural rejuvenation on the deformation behaviour of CuZr based bulk metallic glass

Christian Ebner et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Multidisciplinary Sciences

Strain-hardening and suppression of shear-banding in rejuvenated bulk metallic glass

J. Pan et al.

NATURE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Structural rejuvenation and relaxation of a metallic glass induced by ion irradiation

K. Sun et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Engineering, Mechanical

On the origin of softening in the plastic deformation of metallic glasses

M. Zhang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Nanoindentation creep behavior of Cu-Zr metallic glass films

Yaqiang Wang et al.

MATERIALS RESEARCH LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Rejuvenation and plasticization of metallic glass by deep cryogenic cycling treatment

Wei Guo et al.

INTERMETALLICS (2018)

Add to Collection

Article Multidisciplinary Sciences

Extreme rejuvenation and softening in a bulk metallic glass

J. Pan et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Spatial heterogeneity as the structure feature for structure-property relationship of metallic glasses

Fan Zhu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Rejuvenation by weakening the medium range order in Zr46Cu46Al8 metallic glass with pressure preloading: A molecular dynamics simulation study

S. D. Feng et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Room temperature nanoindentation creep behavior of TiZrHfBeCu(Ni) high entropy bulk metallic glasses

Pan Gong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Rejuvenation decreases shear band sliding velocity in Pt-based metallic glasses

P. Denis et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Multidisciplinary Sciences

Understanding the mechanisms of amorphous creep through molecular simulation

Penghui Cao et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Add to Collection

Article Multidisciplinary Sciences

Hardening of shear band in metallic glass

J. G. Wang et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Interface-controlled creep in metallic glass composites

Constanze Kalcher et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Ductile fracture in notched bulk metallic glasses

J. Pan et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Ceramics

Nanoindentation study on shear transformation zone in a Cu-Zr-Al metallic glassy film with different thickness

Y. Ma et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

Add to Collection

Review Nanoscience & Nanotechnology

Thermomechanical processing of metallic glasses: extending the range of the glassy state

Yonghao Sun et al.

NATURE REVIEWS MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Origin of anomalous inverse notch effect in bulk metallic glasses

J. Pan et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)

Add to Collection

Article Multidisciplinary Sciences

Rejuvenation of metallic glasses by non-affine thermal strain

S. V. Ketov et al.

NATURE (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical annealing in the homogeneous deformation of bulk metallic glass under elastostatic compression

Y. M. Wang et al.

SCRIPTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Indentation size effect and shear transformation zone size in a bulk metallic glass in two different structural states

In-Chul Choi et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Chemistry, Physical

Enhanced plasticity by introducing icosahedral medium-range order in ZrCuNiAl metallic glass

J. Pan et al.

INTERMETALLICS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Softening and dilatation in a single shear band

J. Pan et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Chemistry, Physical

Nanoindentation analysis of time-dependent deformation in as-cast and annealed Cu-Zr bulk metallic glass

Byung-Gil Yoo et al.

INTERMETALLICS (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Room temperature creep in amorphous alloys: Influence of initial strain and free volume

Byung-Gil Yoo et al.

SCRIPTA MATERIALIA (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Ion irradiation enhances the mechanical performance of metallic glasses

R. Raghavan et al.

SCRIPTA MATERIALIA (2010)

Add to Collection

Article Chemistry, Physical

Indentation creep of an Fe-based bulk metallic glass

Y. J. Huang et al.

INTERMETALLICS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Indentation creep of a Ti-based metallic glass

Y. J. Huang et al.

JOURNAL OF MATERIALS RESEARCH (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Micropillar compression studies on a bulk metallic glass in different structural states

A. Dubach et al.

SCRIPTA MATERIALIA (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Room-temperature creep and structural relaxation of Mg-Cu-Y metallic glasses

A. Castellero et al.

ACTA MATERIALIA (2008)

Add to Collection

Article Multidisciplinary Sciences

Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses

D. Pan et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)

Add to Collection

Review Materials Science, Multidisciplinary

Overview No.144 - Mechanical behavior of amorphous alloys

Christopher A. Schuh et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Creep behavior of Ti-6Al-4V and a comparison with titanium matrix composites

M. J. R. Barboza et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Physics, Multidisciplinary

Softening caused by profuse shear banding in a bulk metallic glass

H Bei et al.

PHYSICAL REVIEW LETTERS (2006)

Add to Collection

Article Physics, Applied

Creation and annihilation of free volume during homogeneous flow of a metallic glass

M Heggen et al.

JOURNAL OF APPLIED PHYSICS (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr-W steels

F Abe

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass

A Slipenyuk et al.

SCRIPTA MATERIALIA (2004)

Add to Collection

Review Multidisciplinary Sciences

Supercooled liquids and the glass transition

PG Debenedetti et al.

NATURE (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Stabilization of metallic supercooled liquid and bulk amorphous alloys

A Inoue

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.