☆ 4.5 Article

Modelling of flow stresses during hot deformation of Ti-6Al-4Mo-1V-0.1Si alloy

JOURNAL OF MATERIALS RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Correction and Modeling of Flow Stress during Hot Deformation of 7055 Aluminum Alloy

Renhai Yu et al.

Summary: This study investigates the flow behavior and processing properties of 7055 aluminum alloy, and conducts hot compression tests using a thermomechanical simulation machine. The results show that the influence of friction and adiabatic effect cannot be ignored during the experiment, and the MZA model can accurately predict the flow behavior of the alloy. The hot processing map reveals the safety and instability zone of 7055 aluminum alloy.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Chemistry, Physical

Microstructure evolution and corrosion behaviour of a high Mo containing α plus β titanium alloy for biomedical applications

Diksha Mahadule et al.

Summary: The study investigated the effect of heat treatment on the microstructure and corrosion behavior of a high Mo containing titanium alloy. Different microstructures were observed depending on the heating temperature and cooling conditions. Heat-treated samples showed improved corrosion resistance, attributed to the presence of stable TiO2 film on the corroded surfaces. Samples treated at 950 degrees Celsius exhibited the best corrosion resistance overall.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hot Deformation Characteristic and Strain Dependent Constitutive Flow Stress Modelling of Ti plus Nb Stabilized Interstitial Free Steel

Sumit Ghosh et al.

Summary: Efforts have been made to establish a relation between Zener-Hollomon parameter, flow stress, and dynamic recrystallization in Ti + Nb stabilized interstitial free (IF) steel. A novel constitutive model has been developed to predict the flow behavior in both alpha and gamma phase regions, showing high correlation coefficients and low average absolute relative errors with experimental data. The dominant mechanism for dynamic recrystallization appears to be dislocation glide controlled by dislocation climb.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of heating temperature and cooling rate on the microstructure and mechanical properties of a Mo-rich two phase α plus β titanium alloy

Diksha Mahadule et al.

Summary: The study examined the influence of heating temperature and cooling rate on the microstructure and mechanical properties of a Ti-6Al-1V-4Mo-Si alloy. Different processing conditions resulted in varying microstructures, with oil quenching from the beta phase field leading to high strength and low elongation. The elongation increased with decreasing heating temperature, with the highest elongation obtained from samples heated to 850 degrees C followed by furnace cooling.

JOURNAL OF MATERIALS RESEARCH (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Strain rate sensitivity behaviour of Fe-21Cr-1.5Ni-5Mn alloy and its constitutive modelling

Tushar Ramdas Dandekar et al.

Summary: The hot deformation behavior of Fe-21Cr-1.5Ni-5Mn alloy was studied through isothermal unidirectional hot compression tests, showing that the developed model accurately portrayed its flow behavior. The hot deformation activation energy for peak stress was found to be 508.3 kJ mol(-1), with the best match between experimental and predicted flow stress obtained at 975 degrees C.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hot Deformation Characteristics and Processing Parameter Optimization of Al-6.32Zn-2.10Mg Alloy Using Constitutive Equation and Processing Map

Zhengbing Xiao et al.

Summary: Hot compression tests were conducted on a homogenized Al-6.32Zn-2.10Mg alloy to characterize its hot deformation behavior. A modified Arrhenius constitutive equation was established to describe the flow behavior with good predictive effect on flow stress. Processing maps and optimal parameters were determined, and electron backscatter diffraction was used to analyze grain structure evolution during deformation. Dynamic recovery and continuous dynamic recrystallization were identified as the main softening mechanisms.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of Deformation Behavior and Microstructure Changes for α/β Titanium Alloy at Elevated Temperature

Wenhua Yang et al.

Summary: This study investigated the isothermal compressive behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy, revealing the influence of deformation heating effect and microstructure changes on flow softening behavior. Dynamic recovery may be the main mechanism for microstructure evolution under the influence of deformation temperature and strain rate.

METALS (2021)

Add to Collection

Article Chemistry, Physical

Microstructure Evolution and a Unified Constitutive Model of Ti-55511 Alloy Compressed at Stepped Strain Rates

Gang Su et al.

Summary: The study investigated the flow behavior and microstructure change of the Ti-55511 alloy through thermal compression experiments. A unified constitutive model was developed, considering work hardening effect and dynamic softening mechanisms, with material parameters optimized using a multi-objective algorithm, demonstrating the model's ability to accurately describe the hot compressed alloy's flow features and microstructure evolution.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Hot Deformation Behavior and Processing Maps of a New Ti-6Al-2Nb-2Zr-0.4B Titanium Alloy

Zhijun Yang et al.

Summary: The hot deformation behaviors of a new Ti-6Al-2Nb-2Zr-0.4B titanium alloy were evaluated and a constitutive equation describing the change of deformation temperature and flow stress with strain rate was established. The study found that the deformation mechanism of the alloy varies under different temperatures and strain rates.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region

Yu-Qiang Jiang et al.

Summary: The microstructure evolution of a Ti-55511 alloy deformed at high temperatures and wide strain rate range was studied, and a unified constitutive equation was established to describe the evolution of flow stress, grain size, and dynamic recrystallization fraction. Experimental results showed different structures were formed within the alloy under different deformation conditions, with DRX fraction and sub-grain size changing with increasing deformation temperature and strain rate.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior and corrosion properties of Ti-7Mo-8Nb alloy for biomedical applications

Modar Saood et al.

Summary: The Ti-7Mo-8Nb alloy manufactured through powder metallurgy exhibited superior mechanical properties, including higher compressive yield strength and hardness, lower wear rate, and lower elastic modulus compared to the cast Ti-6Al-4V alloy. Additionally, the Ti-7Mo-8Nb alloy showed higher corrosion resistance in simulated body fluid, indicating its potential as a promising candidate for orthopedic biomedical applications.

MATERIALS RESEARCH EXPRESS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Hot deformation characteristics and microstructure evolution of Ti-5Al-3Mo-1.5V alloy

Faisal Waqar Syed et al.

Summary: The research investigated the microstructure evolution in Ti-5Al-3Mo-1.5V dual-phase Titanium alloy under the concurrent effect of temperature and strain rate, determining the safe hot working regime through compressive characteristics and microstructural analysis.

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING SCIENCES AND APPLIED MATHEMATICS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: A review

Pengfei Gao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Hot tensile properties, microstructure evolution and fracture mechanisms of Ti-6Al-4V alloy with initial coarse equiaxed phases

Yu-Qiang Jiang et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in α plus β region

Y. C. Lin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Constitutive Relationship for Hot Deformation of TB18 Titanium Alloy

Qiang Fu et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Construction of processing maps combined with deformation mechanism maps using creep deformation equations

W. J. Kim et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hot deformation behaviour of Ti-6Al-4V alloy with a transformed microstructure: a multimodal characterisation

Jyoti S. Jha et al.

PHILOSOPHICAL MAGAZINE (2019)

Add to Collection

Article Chemistry, Physical

Role of microstructure on the tension/compression asymmetry in a two-phase Ti-5Al-3Mo-1.5V titanium alloy

Faisal Waciar Syed et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Constructing processing maps for hot deformation and microstructural evolution of Al-Zn-Mg-Cu alloys

Guohui Shi et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural Modeling of the α plus β Phase in Ti-6Al-4V: A Diffusion-Based Approach

M. Villa et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Two flow stress models for describing hot deformation behavior of AISI-1045 medium carbon steel at elevated temperatures

Mohanraj Murugesan et al.

HELIYON (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Investigations on the effect of heating temperature and cooling rate on evolution of microstructure in an α plus β titanium alloy

Aman Gupta et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High-temperature deformation behavior and microstructural characterization of high-Mn bearing titanium-based alloy

Saad Ebied et al.

MATERIALS CHARACTERIZATION (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hot deformation behavior and processing maps of Ti-6Al-4V alloy with starting fully lamellar structure

Wenjing Zhang et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Strain Rate Sensitivity Behaviour of a Chrome-Nickel Austentic-Ferritic Stainless Steel and its Constitutive Modelling

Amit Kumar et al.

ISIJ INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of Hot Deformation Behavior of Duplex Stainless Steel Grade 2507

Saranya Kingklang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Hot deformation behavior of Ti-6Al-4V alloy: Effect of initial microstructure

Z. X. Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Study on Hot Deformation Behavior and Microstructure Evolution of Ti-55 High-Temperature Titanium Alloy

Fengyong Wu et al.

METALS (2017)

Add to Collection

Article Engineering, Biomedical

Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid

Xueyuan Yang et al.

ACTA BIOMATERIALIA (2016)

Add to Collection

Article Chemistry, Physical

Characterization of the hot deformation behavior and microstructural evolution of Ti-6Al-4V sintered preforms using materials modeling techniques

Youngmoo Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Identification for the Optimal Working Parameters of Ti-6Al-4V-0.1Ru Alloy in a Wide Deformation Condition Range by Processing Maps Based on DMM

Yu-feng Xia et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2016)

Add to Collection

Article Engineering, Mechanical

Modeling of a tempered martensitic hot work tool steel behavior in the presence of thermo-viscoplastic coupling

Halina Egner et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Hot deformation behavior of microstructural constituents in a duplex stainless steel during high-temperature straining

Amir Momeni et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)

Add to Collection

Article Mechanics

Experimental and numerical analysis of the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles

J. A. Rodriguez-Martinez et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel

Hamed Mirzadeh et al.

ISIJ INTERNATIONAL (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map

Jingqi Zhang et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection

Article Nanoscience & Nanotechnology

The evolution of microstructure of Ti-6Al-4V alloy during concurrent hot deformation and phase transformation

Lijia He et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Strain-induced phase transformation during thermo-mechanical processing of titanium alloys

Ali Dehghan-Manshadi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic Phase Transformation during Hot-Forging Process of a Powder Metallurgy α+β Titanium Alloy

B. Liu et al.

MATERIALS TRANSACTIONS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior of Ti-8Al-1Mo-1V alloy compared to Ti-6A1-4V

M. Atapour et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behaviour of investment cast and friction stir processed Ti-6Al-4V

M. Atapour et al.

CORROSION SCIENCE (2010)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Hot deformation mechanism and microstructure evolution of TC11 titanium alloy in β field

Chen Hui-qin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of heat treatment on tensile behaviour of Ti-6Al-5Zr-0.5Mo-0.25Si alloy

Anil Kumar Nag et al.

BULLETIN OF MATERIALS SCIENCE (2006)

Add to Collection

Article Engineering, Multidisciplinary

Constitutive modeling and finite element methods for TRIP steels

I. Papatriantafillou et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling beta transus temperature of titanium alloys using artificial neural network

Z Guo et al.

COMPUTATIONAL MATERIALS SCIENCE (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing

R Ding et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Engineering, Manufacturing

Microstructural modeling and process control during hot working of commercial Ti-6Al-4V: Response of lamellar and equiaxed starting microstructures

YVRK Prasad et al.

MATERIALS AND MANUFACTURING PROCESSES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.