☆ 4.5 Article

Analysis of the Anticorrosion Performance and Antibacterial Efficacy of Ti-Based Ceramic Coatings for Biomedical Applications

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Superamphiphobic TiO2 Film by Sol-Gel Dip Coating Method on Commercial Pure Titanium

Mevra Aslan Cakir et al.

Summary: Oxide coatings with superhydrophobic and superoleophobic properties were obtained using the solgel dip-coating method on CP-Ti samples. The coated titanium samples were characterized using XRD, SEM, EDS, 3D optical profilometer, and optical tensiometer. Electrochemical corrosion experiments and in vitro cytotoxicity tests were performed to evaluate the electrochemical properties and biocompatibility of the coatings, respectively. The results showed that the resistance to corrosion current increased significantly due to the low free surface energy values of the superamphiphobic coating. The oxide-coated superamphihobic titanium surfaces exhibited improved biocompatibility after 24 hours, and the films had self-cleaning, antibacterial, and anticorrosion properties.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Add to Collection

Review Infectious Diseases

Bacterial Adhesion Strength on Titanium Surfaces Quantified by Atomic Force Microscopy: A Systematic Review

Juliana Dias Corpa Tardelli et al.

Summary: This review examines the factors determining the strength of bacterial adhesion on titanium surfaces and its alloys. The study demonstrates that the hydrophilicity of surfaces influences bacterial adhesion, but hydrophobic bacteria can also adhere to hydrophilic surfaces through hydrogen bonding. Additionally, surface treatments that reduce areas favorable for bacterial adhesion have a greater impact on biofilm formation than surface roughness. Time-dependent studies are crucial for evaluating bacterial colonization as bacteria develop adaptation mechanisms over time.

ANTIBIOTICS-BASEL (2023)

Add to Collection

Article Automation & Control Systems

Fabrication of hydrophobic surface on Ti6Al4V by WEDM process for surgical instruments and bioimplants

Ved Prakash et al.

Summary: The study demonstrates that the hierarchical structure with dual-scale surface roughness formed on Ti6Al4V material can effectively enhance the surface hydrophobicity and antibacterial properties, reducing bacterial adhesion and growth.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Nanometric CrN/CrAlN and CrN/ZrN multilayer physical vapor deposited coatings on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells

Tohid Rajabi et al.

Summary: Nanometric CrN/ZrN and CrN/CrAlN multilayer coatings were deposited on 316L stainless steel as metallic bipolar plates for PEMFCs. The electrochemical behavior of the coatings was studied and it was found that they can potentially enhance the interfacial contact resistance and corrosion behavior of the bipolar plates, making them suitable for PEMFCs applications.

THIN SOLID FILMS (2022)

Add to Collection

Review Engineering, Mechanical

Thermocapillary lubricant migration on textured surfaces-a review of theoretical and experimental insights

Philipp G. Gruetzmacher et al.

Summary: Thermocapillary migration in tribological systems can cause lubricant starvation and damage due to temperature-induced surface tension gradients. Various approaches, including surface textures and chemical patterns, can be used to manipulate lubricant migration. The review summarizes theoretical and experimental advancements in this field, discussing challenges, potential applications, and future research directions.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2021)

Add to Collection

Article Chemistry, Physical

Enhancing mechanical and biomedical properties of protheses - Surface and material design

Raj Shah et al.

Summary: The long-term success of prosthetics hinges greatly on the biomechanical/medical properties of implanted materials. Special attention to modifying/treating prosthetic surfaces is crucial in enhancing cell proliferation, bio-tribological performance, tendon growth, and mobility, ultimately improving longevity and performance.

SURFACES AND INTERFACES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Corrosion Properties of Ceramic-Based TiO2 Films on Plasma Oxidized Ti6Al4V/316L Layered Implant Structured Manufactured by Selective Laser Melting

Hilmi Tekdir et al.

Summary: This study investigated the corrosion resistance of 316L stainless steel biomaterial with duplex surface modification (metal additive manufacturing and plasma oxidizing). The results showed that plasma oxidized samples had higher corrosion resistance compared to untreated 316L and layered Ti6Al4V/316L samples. The optimal corrosion resistance was achieved under the parameter conditions of 750 degrees C and 4 hours.

JOURNAL OF BIONIC ENGINEERING (2021)

Add to Collection

Review Cell & Tissue Engineering

Modulation of immune-inflammatory responses through surface modifications of biomaterials to promote bone healing and regeneration

Fareeha Batool et al.

Summary: Control of inflammation is crucial for optimal oral wound healing and tissue regeneration. Biomaterial implantation can trigger an immune-inflammatory response, and the interface between cells and the biomaterial surface is critical for tissue regeneration success. The physical nanotopography and surface chemistry of biomaterials play an important role in driving cellular attachment and migration.

JOURNAL OF TISSUE ENGINEERING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Improvement corrosion resistance of Ni-Ti alloy by TiO2 coating and hydroxyaptite/TiO2 composite coating using micro arc oxidation process

Ekbal Mohammed Saeed et al.

Summary: Titanium oxide ceramic coatings and composite coatings of HA/TiO2 on NiTi alloy were prepared by micro-arc oxidation, improving the surface structure and corrosion properties significantly.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Surface performances of Ti-6Al-4V substrates coated PVD multilayered films in biological environments

R. Bahi et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Formation mechanism, corrosion behaviour and biological property of hydroxyapatite/TiO2 coatings fabricated by plasma electrolytic oxidation

Xinxin Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Ceramics

Mechanical, biocorrosion, and antibacterial properties of nanocrystalline TiN coating for orthopedic applications

M. A. Hussein et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of copper-doped titanium nitride coating on angiogenesis

Hui Liu et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Thin Niobium and Niobium Nitride PVD Coatings on AISI 304 Stainless Steel as Bipolar Plates for PEMFCs

Masoud Atapour et al.

COATINGS (2020)

Add to Collection

Review Chemistry, Physical

Wettability Transition for Laser Textured Surfaces: A Comprehensive Review

Ahmed Olanrewaju Ijaola et al.

SURFACES AND INTERFACES (2020)

Add to Collection

Article Multidisciplinary Sciences

Enhancement in corrosion resistance and vibration damping performance in titanium by titanium nitride coating

Kaushik Sarkar et al.

SN APPLIED SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

Tribological performance of titanium nitride coatings: A comparative study on TiN-coated stainless steel and titanium alloy

Magdalena Lepicka et al.

WEAR (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and corrosion properties of thin TiO2 films obtained by magnetron sputtering

A. Kozlovskiy et al.

VACUUM (2019)

Add to Collection

Review Materials Science, Biomaterials

Review on titanium and titanium based alloys as biomaterials for orthopaedic applications

Manmeet Kaur et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A Review on Biomedical Titanium Alloys: Recent Progress and Prospect

Lai-Chang Zhang et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Orthopedics

A comparison of bacterial adhesion and biofilm formation on commonly used orthopaedic metal implant materials: An In vitro study

Rajesh Malhotra et al.

INDIAN JOURNAL OF ORTHOPAEDICS (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Corrosion resistance and mechanical properties of titanium nitride plating on orthodontic wires

Haruki Sugisawa et al.

DENTAL MATERIALS JOURNAL (2018)

Add to Collection

Article Orthopedics

No lower bacterial adhesion for ceramics compared to other biomaterials: An in vitro analysis

P. A. Slullitel et al.

ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH (2018)

Add to Collection

Article Materials Science, Coatings & Films

Friction reduction of steel by laser-induced periodic surface nanostructures with atomic layer deposited TiO2 coating

Zhuo Wang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Biophysics

Facile synthesis of hydroxyapatite nanoparticles mimicking biological apatite from eggshells for bone-tissue engineering

Nguyen Kim Nga et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Antibacterial Surface Coating for Bone Scaffolds Based on the Dark Catalytic Effect of Titanium Dioxide

David Wiedmer et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Materials Science, Composites

Effect of the Chemical Composition of Simulated Body Fluids on Aerogel-Based Bioactive Composites

Eniko Gyori et al.

JOURNAL OF COMPOSITES SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Improvement of the bio-functional properties of TiO2 nanotubes

A. Roguska et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Biophysics

Nanorough titanium surfaces reduce adhesion of Escherichia coli and Staphylococcus aureus via nano adhesion points

Claudia Luedecke et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy

H. R. Bakhsheshi-Rad et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of nanotube arrays on commercially pure titanium and their apatite-forming ability in a simulated body fluid

Hsueh-Chuan Hsu et al.

MATERIALS CHARACTERIZATION (2015)

Add to Collection

Article Materials Science, Coatings & Films

TiN coated stainless steel bracket: Tribological, corrosion resistance, biocompatibility and mechanical performance

Jun Zuo et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Antibacterial efficacy, corrosion resistance, and cytotoxicity studies of copper-substituted carbonated hydroxyapatite coating on titanium substrate

Yong Huang et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Add to Collection

Article Engineering, Biomedical

Bacterial adhesion and Hemocompatibility behavior of TiN, TiO2 Single and TiN/TiO2 Multilayer Coated 316L SS for Bioimplants

Vinita Vishwakarma et al.

JOURNAL OF BIOMIMETICS BIOMATERIALS AND BIOMEDICAL ENGINEERING (2015)

Add to Collection

Article Microbiology

Effect of surface roughness of biomaterials on Staphylococcus epidermidis adhesion

Itaru Yoda et al.

BMC MICROBIOLOGY (2014)

Add to Collection

Article Engineering, Biomedical

Differential response of Staphylococci and osteoblasts to varying titanium surface roughness

Yong Wu et al.

BIOMATERIALS (2011)

Add to Collection

Review Engineering, Biomedical

Titanium oxide antibacterial surfaces in biomedical devices

Livia Visai et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2011)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Effect of nitride film coatings on cell compatibility

Chia-Chi Chien et al.

DENTAL MATERIALS (2008)

Add to Collection

Article Electrochemistry

Time-dependent growth of biomimetic apatite on anodic TiO2 nanotubes

Julia Kunze et al.

ELECTROCHIMICA ACTA (2008)

Add to Collection

Article Engineering, Biomedical

Preparation of SBF with different HCO-3 content and its influence on the composition of biomimetic apatites

L Müller et al.

ACTA BIOMATERIALIA (2006)

Add to Collection

Article Engineering, Biomedical

Decreased bacterial adhesion to surface-treated titanium

B Del Curto et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Bioactivity of TiN-coated titanium implants

S Piscanec et al.

ACTA MATERIALIA (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Deposition of calcium ions on rutile (110): A first-principles investigation

M Svetina et al.

ACTA MATERIALIA (2001)

Add to Collection

Article Engineering, Biomedical

Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties

SWK Kweh et al.

BIOMATERIALS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.