Related references
Note: Only part of the references are listed.
Article
Polymer Science
Serife Parlayici
Summary: In the synthesis of alginate-based composites, new materials consisting of alginate as biopolymer matrix, sepiolite and glutaraldehyde as cross-linking agents were obtained. The adsorption process of methylene blue, malachite green, and methyl violet from aqueous medium by the synthesized glutaraldehyde cross-linked alginate/sepiolite hydrogel capsules was studied. The experimental parameters and isotherm models were investigated to understand the adsorption behavior, and the results showed that the synthesized composite had good adsorption capability.
Article
Chemistry, Multidisciplinary
Omar Mbrouk et al.
Summary: Solar-to-fuel conversion is a promising clean energy approach that has attracted the attention of researchers. The use of solar-driven photocatalysts, such as plasmonic nanoparticles, is crucial for producing valuable fuel gases like methane and hydrogen. In this study, orange peel extract was employed as a capping agent to combine titanium dioxide with Pd-plasmonic nanoparticles. The obtained plasmonic photocatalysts exhibited enhanced performance in capturing visible light and showed promising results in the production of combustible gases through photocatalytic reactions.
Article
Agricultural Engineering
Long Chen et al.
Summary: In this study, functionalized banana peel biochar (BPB) was prepared by microwave-assisted pyrolysis for the first time to investigate its adsorption to malachite green (MG) dye. The maximum adsorption capacity of BPB500 and BPB900 to malachite green reached 1790.30 and 2297.83 mg.g(-1) within 120 min. The adsorption mechanism of MG dye on BPB included hydrophobic interaction, hydrogen bonding, pi-pi interaction, n-pi interaction, and ion exchange. Furthermore, BPB showed great potential for practical applications in simulated wastewater treatment experiments and cost calculations.
BIORESOURCE TECHNOLOGY
(2023)
Article
Environmental Sciences
Daniel K. Sarfoa et al.
Summary: By using a simple copper electrode under cathodic conditions, reactive nitrosonium ions can be electrochemically generated for the degradation of different classes of synthetic organic dyes. This process can be achieved in an aqueous HNO3/KNO3 electrolyte at a relatively low cathodic potential of -0.5 V RHE at room temperature. The rapid decolorisation and mineralisation of various dye types have been demonstrated, showing potential for the remediation of polluted waterways.
Article
Polymer Science
A. M. Hezma et al.
Summary: Alginate-zinc oxide (Alg-ZnO) biocomposite was synthesized and tested as an adsorbent for chromium ions Cr(VI) in environmental applications. The biocomposite was prepared by interaction between sodium alginate biopolymer and zinc oxide nanoparticles (ZnO-NPs). The adsorption characteristics of the synthesized Alg-ZnO biocomposite were analyzed using various techniques and isotherm models, showing favorable adsorption capacity and dominance of monolayer and physisorption.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS
(2023)
Article
Polymer Science
Katiyan Mohammed Rehan et al.
Summary: Poly(Glycidyl methacrylate)/Fe3O4-GO nanocomposite (PFG) and Poly(Glycidyl methacrylate)-GO nanocomposite (PG) were prepared as reusable adsorbents for methylene blue dye (MB) adsorption. Characterization of PFG and PG was conducted to understand their structural, thermal, magnetic, morphological and compositional properties. The adsorption of MB on PFG and PG was studied by investigating pH, contact time, adsorbent dosage, temperature, and dye concentration. Both PFG and PG showed good fits with pseudo second order kinetic model and Langmuir isotherm for adsorption. PFG exhibited a higher maximum adsorption capacity for MB compared to PG due to the presence of Fe3O4, making it a super-paramagnetic material suitable for efficient recovery and reusability.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS
(2023)
Article
Polymer Science
Asaad. F. Hassan et al.
Summary: In this study, a novel nanomaterial called MKCO was fabricated by incorporating Fenton (NM) and Fenton-like reagent (NCO) into a potassium carrageenan biopolymer matrix. The prepared MKCO showed unique properties and exhibited high adsorption capacity and catalytic degradation efficiency for Safranin-O dye. Langmuir's adsorption model was found to be the best-fitted model for SO adsorption onto the prepared solid materials. The catalytic decomposition of SO was found to be an endothermic and non-spontaneous process.
MACROMOLECULAR RESEARCH
(2023)
Article
Green & Sustainable Science & Technology
Yuwei Hua et al.
Summary: To address environmental pollution caused by dyes and heavy metals, it is crucial to develop adsorbents with efficient adsorption and removal capabilities. In this study, biomimetic apatite hydrogel beads resembling the structure of petunia pollen were created for the effective removal of lead ions (Pb2+) and malachite green (MG) through adsorption. By encapsulating magnetic hydroxyapatite nanoparticles (MHNPs) in sodium alginate gels using an ionic cross-linking approach, the resulting hydrogel beads (MHSB) exhibited satisfactory adsorption capacities of 208.06 mg/g for MG and 475.50 mg/g for Pb2+. The magnetic MHNPs and MHSB showed promising potential for adsorbing and removing dyes and heavy metal pollutants due to their strong adsorption capability and stability.
JOURNAL OF CLEANER PRODUCTION
(2023)
Article
Materials Science, Multidisciplinary
Amira A. Hashem et al.
Summary: This study investigates the synthesis of calcium silicate nanopowders from marble sawing dust and silica fume using microwave irradiation-assisted route. Coalesced tiny cubes and rods with flower-like shapes in the range of similar to 150 nm in size with a surface area of 18.357 m(2)g(-1) have been obtained.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS
(2023)
Article
Chemistry, Physical
Asaad F. Hassan et al.
Summary: Four types of nano-solid adsorbents, including nanohydroxyapatite based on sea scallop shells (NHAP), potassium kappa-carrageenan (KG), potassium kappa-carrageenan/nanohydroxyapatite (KPC), and potassium kappa-carrageenan/calcium alginate/nanohydroxyapatite as triple biocomposite (TBC) beads, were synthesized and used for methylene blue removal from wastewater. The TBC particles showed higher specific surface area, smaller particle size, thermal stability, and the maximum adsorption capacity towards methylene blue. The adsorption of methylene blue onto all the solid adsorbents followed Freundlich, Langmuir, Dubinin-Radushkevich, and Temkin adsorption models, and the desorption efficiency reached about 86% using hydrochloric acid (1 mol/L) as the desorbing agent.
APPLIED SURFACE SCIENCE ADVANCES
(2023)
Article
Agricultural Engineering
Hai-Yong Yao et al.
Summary: The eco-friendly treatment of complex textile and dyeing wastewaters is a pressing environmental concern. This study examined an approach that utilizes different treatment paths and integrated anaerobic-aerobic processes to treat high-strength and recalcitrant textile dyeing wastewaters. The results showed that polyaluminum chloride precoagulation was effective in removing over 97% of suspended solids (SS) and more than 70% of chemical oxygen demand (COD) in the suede fabric dyeing stream. Hydrolysis pretreatment also proved successful in removing up to 58% of COD and 83% of SS in other low-strength streams. Additionally, the integrated anaerobic-aerobic treatment achieved notable COD removal of up to 99% from high-strength wastewaters. The anaerobic granular sludge process demonstrated several advantageous attributes, including high feed loading, a smaller footprint, minimal sludge production, and good stability. Overall, the integrated anaerobic-aerobic treatment provides a robust and viable option for highly contaminated and recalcitrant textile dyeing wastewaters.
BIORESOURCE TECHNOLOGY
(2023)
Article
Materials Science, Ceramics
Jiten Yadav et al.
Summary: The purpose of this research is to treat wastewater containing Malachite Green Dye with locally available ceramic clay. The study found that optimizing operating parameters can treat the effluent up to the recycling limit, and ceramic clay can be used as a dye remover.
CERAMICS INTERNATIONAL
(2023)
Article
Engineering, Environmental
Oranso T. Mahlangu et al.
Summary: In this study, graphene oxide-zinc oxide (GO-ZnO) nanocomposite photocatalytic membranes were fabricated using a novel double casting phase inversion method. The incorporation of GO-ZnO improved the hydrophilicity of the membranes, while the addition of PVP increased the pure water flux. Conversely, increasing GO-ZnO concentration improved the rejection of salt and drugs. Furthermore, the GO-ZnO/PVP membrane displayed the highest photocatalytic degradation performance. Overall, this work demonstrates the potential to improve both membrane filtration and photocatalytic properties through tailored membrane synthesis.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2023)
Article
Chemistry, Multidisciplinary
Asaad F. Hassan et al.
Summary: Ferric-modified nanocellulose composite and nanocellulose particles were synthesized and found to have high adsorption potential for the removal of the insecticide diazinon from contaminated water. The synthesized adsorbents showed good thermal stability, surface area, and mesoporous structure, and exhibited high adsorption capacity and removal efficiency under specific conditions. This study provides insights into the health and environmental risks posed by insecticides and offers a potential solution for their removal.
Article
Multidisciplinary Sciences
Ashfaque Ali Bhutto et al.
Summary: The biosynthesis of iron oxide nanoparticles and their application in removing toxic metals from water were studied. The synthesized materials showed excellent adsorption capacity for the removal of Cd, Ni, and Pb. The proposed nanocomposite exhibited favorable adsorption kinetics and thermodynamics. The study concluded that this nanocomposite is efficient in removing toxic metals from drinking water.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2023)
Article
Multidisciplinary Sciences
Asaad F. Hassan et al.
Summary: This study successfully prepared nanomagnetite/potassium carrageenan bio-composite beads and characterized them. Compared to the adsorption process, the photo-Fenton degradation showed higher efficiency in degrading methylene blue dye. The results showed that NC had a large specific surface area, mesoporous structure, and high adsorption capacity. The adsorption process followed the Langmuir model, while the photo-Fenton degradation followed a nonspontaneous and endothermic process.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2023)
Article
Materials Science, Paper & Wood
Khaled Charradi et al.
Summary: The spinel zinc ferrite (ZnFe2O4) /cellulose composite was successfully fabricated and evaluated as a photocatalyst for the degradation of methylene blue (MB). The properties and degradation mechanism of the composite were investigated using various characterization techniques. Under suitable conditions, the composite effectively degraded MB and showed certain cycling regeneration capability. The photocatalytic process followed a pseudo-second-order kinetic model.
Article
Chemistry, Physical
Gianluca Viscusi et al.
Summary: This research focuses on designing and fabricating green and sustainable systems for efficient removal of methylene blue from aqueous solutions. Hybrid beads were produced using ionotropic gelation technique with calcium chloride, consisting of a sodium alginate matrix, hemp hurd, and halloysite nanoclay. The adsorption capacity of the composite beads was found to increase with higher HNTs content, with the process mainly characterized by boundary diffusion and intraparticle diffusion. Additionally, diffusion of the dye varied with HNTs content and pH, decreasing from acidic to neutral solutions and then increasing in an alkaline environment.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2022)
Article
Polymer Science
Saruchi et al.
Summary: A semi interpenetrating polymer network (SIPN) of Aloe-vera-poly(acrylic acid) and its nano-composite were synthesized, and the effect of various chemical properties on the swelling of the nano-composites was investigated. The synthesized nanocomposite showed excellent adsorption performance and can be utilized as an efficient device for dye sorption.
JOURNAL OF POLYMER RESEARCH
(2022)
Article
Polymer Science
Mahreni Mahreni et al.
Summary: This study reported the synthesis of Ca-Alginate as an adsorbent to reduce the amount of malachite green (MG) in wastewater. The adsorbent exhibited a macropore structure with a high specific surface area. Under specific conditions, the Ca-Alginate was able to adsorb up to 84.47% of MG, following a modified pseudofirst-order kinetic model.
Article
Food Science & Technology
Reddicherla Umapathi et al.
Summary: Recent scientific and technological studies on optical sensing strategies for on-site detection of pesticide residues in agricultural foods have made novel advancements, including fluorescence sensors, hydrogels, chemiluminescence assay, enzyme-linked immunosorbent assays, fiber-optic biosensors, phosphorescence, lateral flow immunoassays, double-signal fluorescence strategies, glove-based sensors, and paper-based sensors. These advancements provide significant insights and future perspectives for the design and development of novel optical sensors with applications in various fields.
TRENDS IN FOOD SCIENCE & TECHNOLOGY
(2022)
Article
Energy & Fuels
Fouzia Mashkoor et al.
Summary: A magnetically separable Fe3O4 decorated chitosan adsorbent was synthesized and characterized for the adsorption of malachite green and methylene blue dyes. The adsorbent showed efficient adsorption capacity, reusability for multiple cycles, and was found to be endothermic and spontaneous in nature for the adsorption of the dyes. Overall, Fe3O4 decorated chitosan demonstrated promising performance in treating dye-containing wastewater.
BIOMASS CONVERSION AND BIOREFINERY
(2022)
Article
Engineering, Chemical
Patricia Grassi et al.
Summary: In this study, white sugar-derived carbons prepared by different methods were employed as adsorbents for methylene blue dye in water. The characterization results revealed that one of the carbon samples (SC4) exhibited a highly porous structure and a larger surface area, showing excellent adsorption performance for methylene blue.
CHEMICAL ENGINEERING RESEARCH & DESIGN
(2022)
Article
Environmental Sciences
Yisen Li et al.
Summary: In this study, an amphoteric self-floating adsorbent (Am-SA) was synthesized to capture dyes in a wide pH range. The co-precipitation phenomenon of dyes was observed and the mechanism was revealed through simulation. The aggregation phenomena were also observed in various mixed dye systems. The utilization of co-precipitation and adsorption mechanisms can significantly improve dye removal. This study is of great importance for developing cost-effective treatment strategies.
Article
Environmental Sciences
Thangavel Akkini Devi et al.
Summary: In this study, a green synthetic method using Sargassum ilicifolium to prepare extremely stable silver nanoparticles and gold nanoparticles was demonstrated. The synthesized nanoparticles were characterized and found to have stability, bactericidal activity, and photocatalytic behavior, showing potential applications in wastewater treatment and water purification.
ENVIRONMENTAL RESEARCH
(2022)
Article
Biochemistry & Molecular Biology
Raoudha Soury et al.
Summary: The study successfully prepared and characterized a new composite gel bead by chemically modifying a biopolymer. It was found that the composite beads exhibited excellent adsorption capacity for removing cationic dye from water.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2022)
Article
Chemistry, Multidisciplinary
R. J. Kamble et al.
Summary: A simple and time-efficient hydrothermal method was used to prepare phase-pure anatase TiO2 and Co2+-TiO2 nanoparticles, which showed high efficiency as visible light active photocatalysts for the degradation of MG. The Co2+-TiO2 nanoparticles with a weight percentage of 1.61% exhibited an 82% removal rate of MG under direct sunlight.
JOURNAL OF THE IRANIAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Multidisciplinary
Renu Yadav et al.
Summary: Photocatalytic degradation of dyes using metal oxides and their composites is an effective method for removing pollutants from wastewater systems. The coupling of metal oxides increases the efficiency of the process, thanks to their ability to absorb broad spectrum light, operate quickly, and exhibit natural p-n characteristics. In this study, binary and ternary nanocomposites of Copper Oxide/Zinc Oxide (CuO/ZnO) and beta cyclodextrin (beta-CD) were prepared using the sol-gel method. The synthesized materials were characterized using various techniques, and their photocatalytic performance was tested using model textile dyes. The addition of beta-CD improved the efficiency of the catalyst and reduced electron hole recombination. The beta-CD-CuO/ZnO nanocomposite exhibited superior photocatalytic activity compared to CuO/ZnO, with degradation efficiencies of up to 89.15% and 79.90% for MB and MG dyes, respectively, after 180 minutes of irradiation.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
(2022)
Article
Materials Science, Multidisciplinary
Ivan Halomoan et al.
Summary: CuO-Gd2Ti2O7 material was successfully prepared with the assistance of Acmella uliginosa leaf extract, and it showed improved photocatalytic activity under visible light illumination for the degradation of pollutants.
MATERIALS RESEARCH BULLETIN
(2022)
Article
Chemistry, Multidisciplinary
Alireza Nasiri et al.
Summary: A powerful and magnetically separable nano-adsorbent CuCoFe2O4@Chitosan was successfully synthesized using a new microwave-assisted method. The magnetic nanohybrid adsorbent was characterized and its adsorption process for Tetracycline (TC) was investigated. The results showed that the TC adsorption process on the synthesized magnetic nanocomposite followed the Freundlich isotherm model and pseudo-second-order kinetic. Thermodynamic analyses revealed that the adsorption process was spontaneous, favorable, and exothermic. The nano-adsorbent exhibited good magnetic properties for easy separation and maintained high removal efficiency after multiple adsorption-desorption cycles.
ARABIAN JOURNAL OF CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Islam Elsayed et al.
Summary: The adsorption behavior of anionic dyes by polyethylenimine ozone oxidized hydrochar was studied, and it was found that the adsorption capacities of the dyes increased with the functionalization of polyethylenimine. Surface characterization showed that the modification greatly enhanced the adsorbent surface chemistry. The adsorption kinetics and isotherm results demonstrated the efficient removal of anionic dyes by the adsorbent.
ARABIAN JOURNAL OF CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Alireza Nasiri et al.
Summary: In this study, CoFe2O4@MC/activated carbon nano-adsorbent was synthesized and successfully used for the removal of Reactive Red 198 dye. The adsorbent showed high removal efficiency, good thermodynamic properties, and reusable characteristics.
ARABIAN JOURNAL OF CHEMISTRY
(2022)
Article
Energy & Fuels
Walaa A. Shaltout et al.
Summary: In this study, four solid adsorbents prepared through green synthesis sources were characterized and investigated for their adsorption performance, kinetics, and thermodynamics towards Safranin-O dye. The results showed that the ferric @nanocellulose/nanohydroxyapatite composite exhibited a high surface area and adsorption capacity, and good adsorption performance under different conditions.
BIOMASS CONVERSION AND BIOREFINERY
(2022)
Article
Green & Sustainable Science & Technology
Qixia Qiao et al.
Summary: A facile and scalable synthesis method was designed for the preparation of mesoporous composite materials from waste coal gasification fine slag, which exhibited unique structure and high adsorption performance on malachite green. Thermodynamic and kinematic analysis suggested that the adsorption process was dominated by chemisorption, and the adsorption was endothermic, entropy-increasing and entropy-controlled.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Chemistry, Applied
Omar A. Mbrouk et al.
Summary: Plasmonic Pd-ZnO nano photocatalysts synthesized via a green chemistry approach show innovation in visible-light-induced photocatalysis for photobiogas production from organic dye pollutants.
APPLIED ORGANOMETALLIC CHEMISTRY
(2022)
Article
Biotechnology & Applied Microbiology
Walaa R. Abd-Ellatif et al.
Summary: Zn-Co layered double hydroxide (LDH) nanosheets were synthesized and the effect of different temperatures on LDH was studied. LDH-300 showed efficient removal of Ponceau 4R dye from water. The study investigated the impact of various parameters on the photo-degradation process and obtained relevant kinetic and thermodynamic parameters.
ENVIRONMENTAL TECHNOLOGY & INNOVATION
(2022)
Article
Engineering, Chemical
Alireza Nasiri et al.
Summary: CuCoFe2O4@MC/AC, a highly powerful and magnetically separable nano-adsorbent, was synthesized using a novel microwave-assisted technique. The nanomagnetic adsorbent showed high adsorption efficiency for pollutants under optimal conditions. The adsorption process followed Freundlich and pseudo-second-order models. The reusability of the magnetic nano-adsorbent decreased slightly after multiple cycles. Toxicity and bioassay evaluations indicated the potential of CuCoFe2O4@MC/AC for antibiotic removal.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Engineering, Environmental
Soraya Ihaddaden et al.
Summary: This study successfully removed a basic dye using a bentonite-based coagulant and a cactus-based flocculant. The results show that these biomaterials have excellent removal efficiency under appropriate conditions, even outperforming conventional chemicals.
JOURNAL OF WATER PROCESS ENGINEERING
(2022)
Article
Chemistry, Multidisciplinary
Omar Mbrouk et al.
Summary: The photocatalytic degradation of ethanol was studied using morphologically tuned nanostructured ZnO and ZnO/TiO2 nanocomposites. The composite matrix exhibited higher photocatalytic activity than pure ZnO nanomaterials due to the synergistic interaction between ZnO and TiO2 particles.
Article
Environmental Sciences
Zubaria Khan et al.
Summary: Three different types of copper ferrite nanoparticles were synthesized and characterized. The functionalized CuFe2O4 nanoparticles showed the highest photocatalytic degradation efficiency for the tested dye in an acidic medium.
ENVIRONMENTAL RESEARCH
(2022)
Article
Chemistry, Multidisciplinary
Sundas Ali et al.
Summary: CdS nanoparticles were synthesized and characterized through hydrothermal method. The nanoparticles exhibited a small band gap and a hexagonal crystalline structure. The degradation of methylene blue by CdS nanocatalyst followed second order kinetics and was effective at low concentration and optimal dosage of the catalyst.
CHEMISTRY AFRICA-A JOURNAL OF THE TUNISIAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Multidisciplinary
Youssef Aoulad El Hadj Ali et al.
Summary: In this study, a simple method using dried dewatered sewage sludge (D@DSS) as an adsorbent was proposed for the removal of malachite green (MG) dye from aqueous solutions. The D@DSS showed excellent adsorption capacity for MG in synthetic and industrial wastewater, and had better selectivity towards cationic dyes compared to other dyes. The adsorbent characterization confirmed its rough and charged surface with specific functional groups, and the adsorption process followed the Jovanovic model isotherm and pseudo-second order kinetics.
CHEMISTRY AFRICA-A JOURNAL OF THE TUNISIAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Physical
Runxuan Long et al.
Summary: The study successfully constructed a composite schottky photocatalytic adsorbent by in situ growing MOF (Fe) on Ti3C2 MXene, enhancing the photocatalytic performance of MOF and showing good removal and treatment effects on wastewater containing different dyes.
APPLIED SURFACE SCIENCE
(2021)
Article
Materials Science, Multidisciplinary
Ngonidzashe Masunga et al.
Summary: This study successfully synthesized single-phase superparamagnetic CF nanoparticles with high surface area and low bandgap energy by optimizing different synthesis parameters. The nanoparticles exhibited excellent performance in photocatalysis and magnetic properties due to the optimization of parameters.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS
(2021)
Article
Acoustics
Zeinab Talebzadeh et al.
Summary: The study focused on the photocatalytic process for removing artificial dyes and organic impurities by synthesizing La2Sn2O7/Graphitic carbon nitrides nanocomposites through rapid ultrasonic treatment. Utilizing broccoli extract as a natural surfactant enabled control over crystal nucleation and growth, leading to advanced photocatalytic performance. The research also investigated the mechanism of dye removal through photocatalysis under different experimental parameters, providing valuable insights for nano-catalyst applications.
ULTRASONICS SONOCHEMISTRY
(2021)
Article
Engineering, Environmental
Fengjie Deng et al.
Summary: A novel method for surface modification of mesoporous carbon (MC) with poly (ionic liquids) (PIL) using efficient and green chemical reactions was reported. The resulting MC@PIL composites showed enhanced adsorption capacity for Congo red and good adsorption/desorption cycle performance, making them promising candidates for pollutant removal in wastewater treatment.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2021)
Article
Engineering, Environmental
Zahra Rahimi et al.
Summary: This study aimed to remove non-biodegradable colored compounds from biologically treated baker's yeast effluent using an antifouling membrane. The synthesized NF membrane with 1 wt% CA-f-TA nanofiller showed the highest flux recovery ratio (FRR) and dye rejection, as well as significant COD removal efficiencies, indicating its potential for wastewater reuse.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2021)
Article
Engineering, Environmental
Ahmed El Nemr et al.
Summary: Mesoporous nano-activated carbon was prepared from green algae Ulva lactuca using zinc chloride impregnation as the activation process. The obtained activated carbon has high carbon content, specific surface area, pore volume, and average pore diameter. The adsorption properties of the activated carbon were tested using Methylene blue dye, showing effective adsorption capacity and high correlation with Langmuir and pseudo-second-order models. Multiple adsorption-desorption cycles showed minimal loss of dye-adsorption capacities.
ENVIRONMENTAL PROCESSES-AN INTERNATIONAL JOURNAL
(2021)
Article
Chemistry, Physical
Gokben Basaran Kankilic et al.
JOURNAL OF MOLECULAR LIQUIDS
(2020)
Article
Materials Science, Ceramics
Asaad F. Hassan et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
(2020)
Article
Chemistry, Physical
Ali H. Jawad et al.
SURFACES AND INTERFACES
(2020)
Article
Environmental Sciences
Asaad F. Hassan
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
(2019)
Article
Materials Science, Multidisciplinary
R. Priya et al.
MATERIALS RESEARCH EXPRESS
(2019)
Article
Engineering, Chemical
Kholod H. Kamal et al.
DESALINATION AND WATER TREATMENT
(2019)
Article
Engineering, Environmental
Roman Bulanek et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2019)
Article
Engineering, Chemical
Alberto Boretti et al.
Article
Polymer Science
Mukesh Kumar et al.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS
(2018)
Article
Biochemistry & Molecular Biology
Hossein Hosseinzadeh et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2018)
Article
Chemistry, Physical
Youssef Guesmi et al.
JOURNAL OF MOLECULAR LIQUIDS
(2018)
Proceedings Paper
Materials Science, Multidisciplinary
Sh A. Idrees et al.
INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND SCIENCE
(2018)
Article
Engineering, Chemical
Asaad F. Hassan et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
(2017)
Article
Computer Science, Artificial Intelligence
Aboul Ella Hassanien et al.
APPLIED SOFT COMPUTING
(2016)
Article
Optics
Annie P. Vinosha et al.
Article
Acoustics
M. Ahmad et al.
ULTRASONICS SONOCHEMISTRY
(2014)
Article
Ecology
Emine Akar et al.
ECOLOGICAL ENGINEERING
(2013)
Article
Chemistry, Applied
Yongchun Dong et al.
Article
Materials Science, Multidisciplinary
Iman Khosravi et al.
MATERIALS CHEMISTRY AND PHYSICS
(2011)
Article
Chemistry, Physical
Mouloud Lezehari et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2010)
Article
Energy & Fuels
Renu Yadav et al.
Article
Engineering, Environmental
Vincent Rocher et al.
JOURNAL OF HAZARDOUS MATERIALS
(2010)
Article
Engineering, Environmental
Kaili Lin et al.
JOURNAL OF HAZARDOUS MATERIALS
(2009)
Article
Chemistry, Physical
RB Kale et al.
APPLIED SURFACE SCIENCE
(2004)
Article
Materials Science, Multidisciplinary
SW Tao et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY
(2000)
