☆ 4.7 Article

The effect of synthesis conditions on the in situ grown MIL-100(Fe)-chitosan beads: Interplay between structural properties and arsenic adsorption

JOURNAL OF HAZARDOUS MATERIALS (2024)

Related references

Note: Only part of the references are listed.

Article Biochemistry & Molecular Biology

Efficient adsorption of Congo red by micro/nano MIL-88A (Fe, Al, Fe-Al)/chitosan composite sponge: Preparation, characterization, and adsorption mechanism

Shiyong Zhao et al.

Summary: For the first time, MIL-88A crystals with different metal ligands (Fe, Al, Fe-Al) were prepared using the hydrothermal method. These materials showed different crystal structures and surface morphologies, leading to varying adsorption properties towards Congo red (CR). The maximum adsorption capacities for MIL-88A (Fe), MIL-88A (Fe-Al), and MIL-88A (Al) were found to be 607.7 mg·g(-1), 536.4 mg·g(-1), and 512.1 mg·g(-1), respectively. Furthermore, the combination of MIL-88A with chitosan (CS) and the freeze-drying method produced a MIL-88A/CS composite sponge, which not only addressed the difficulty in recovering MIL-88A powder but also enhanced the CR removal capability of the adsorbent. The maximum adsorption capacities for MIL-88A (Fe-Al)/CS, MIL-88A (Fe)/CS, MIL-88A (Al)/CS, and CS were 1312 mg·g(-1), 1056 mg·g(-1), 996.7 mg·g(-1), and 769.6 mg·g(-1), respectively. The structure and physicochemical properties of the materials were assessed using SEM, FTIR, XRD, TGA, BET, and Zeta. The adsorption of CR followed pseudo-second-order kinetics and the Langmuir, Sips isotherm model, indicating endothermic monomolecular chemical adsorption. The removal of CR was attributed to electrostatic interactions, hydrogen bonding, metal coordination effects, and size-matching effects.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Review Environmental Sciences

Arsenic in the geo-environment: A review of sources, geochemical processes, toxicity and removal technologies

N. Janardhana Raju

Summary: Arsenic contamination in groundwater is a global concern for human health through drinking and irrigation practices. The review in this paper covers sources, processes, health effects, and treatment technologies for arsenic removal. The most serious known arsenic contamination problem with the largest population at risk is found in Bangladesh and West Bengal state in India.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Incorporation of MIL-101 (Fe or Al) into chitosan hydrogel adsorbent for phosphate removal: Performance and mechanism

Shaopeng Zhang et al.

Summary: This study incorporated MIL-101 (Al/Fe) into chitosan for phosphate removal and studied the effects of different adsorption parameters on phosphate adsorption, demonstrating that MOFs-chitosan adsorbents have excellent adsorption capacity and selectivity for phosphate.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection

Review Chemistry, Applied

Advances in the application of chitosan-based metal organic frameworks as adsorbents for environmental remediation

Herbert Musarurwa et al.

Summary: This review provides a comprehensive overview of the advances in the application of chitosan/MOF composites as versatile adsorbents for environmental pollutants. It highlights their excellent adsorptive properties, easy regeneration, and recycling capabilities. The challenges and future prospects associated with the use of these composites are also discussed in detail.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Article Engineering, Chemical

Confined growth of MOF in chitosan matrix for removal of trace Pb(II) from reclaimed water

Yu Ma et al.

Summary: In this study, metal-organic framework/chitosan composite beads were prepared and showed a high adsorption efficiency of 99.95% for Pb(II) ions, meeting the international drinking water standards. The material also demonstrated good recoverability and has potential applications in reclaimed water treatment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Facile in-situ growth of metal-organic framework layer on carboxylated nanocellulose/chitosan aerogel spheres and their high-efficient adsorption and catalytic performance

Zhaohang Zhang et al.

Summary: A core-shell hybrid aerogel sphere material was fabricated by combining ionic cross-linking and coordination bonding strategies, with MOF199 crystal shell grown on Cu2+ ions cross-linked CNCA and CMCS hydrogel sphere templates. The resulting aerogel spheres exhibited mesoporous and macroporous structure and excellent adsorption capacity for methylene blue. Moreover, the carbonization product of hybrid aerogels showed high efficiency as a catalyst for the reduction of p-nitrophenol, with CuO species playing a dominant role in the catalytic process.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Biochemistry & Molecular Biology

In situ growth of ZIF-8 on carboxymethyl chitosan beads for improved adsorption of lead ion from aqueous solutions

Xiaoyan Zhu et al.

Summary: This study proposed a method for in situ growth of ZIF-8 on BCMC to produce a composite adsorbent for Pb2+ removal from water. Results showed that BCMC enhanced the stability of ZIF-8 and improved the removal efficiency of Pb2+. The maximum adsorption capacity of BCMC@ZIF-8 was 566.09 mg/g according to the Langmuir model fitting.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Engineering, Environmental

Selective adsorption of arsenic over phosphate by transition metal cross-linked chitosan

Lauren N. Pincus et al.

Summary: The study investigated the selective adsorption capabilities of transition metal chitosan complexes towards arsenite and arsenate over phosphate, with Fe(III)-chitosan showing the strongest affinity for As(V) and As(III) over phosphate.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Applied

A review on the use of chitosan and chitosan derivatives as the bio-adsorbents for the water treatment: Removal of nitrogen-containing pollutants

Mina Keshvardoostchokami et al.

Summary: This review paper discusses the use of chitosan and its derivatives as adsorbents for removing nitrogen-containing pollutants from water, highlighting the impact of modification on adsorbent properties.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Arsenic removal technologies and future trends: A mini review

Sadiya Alka et al.

Summary: Arsenic contamination is recognized as a significant environmental issue, with its remediation being crucial for the health of plants, animals, humans, and the overall ecosystem. This review comprehensively examines arsenic toxicities and removal techniques, including adsorption, ion exchange, and phytoremediation, among others.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Engineering, Environmental

A review on sources, identification and treatment strategies for the removal of toxic Arsenic from water system

B. Senthil Rathi et al.

Summary: This article discusses the release and accumulation of arsenic in groundwater, as well as the factors influencing these processes. Various arsenic removal technologies are explored, including adsorption, ion exchange, bio sorption, and membrane technology. Innovative functional substances are proposed as potential alternatives for arsenic removal, showing promising results in achieving nearly 99% removal efficiency under ideal conditions.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Uniform and stable immobilization of metal-organic frameworks into chitosan matrix for enhanced tetracycline removal from water

Rui Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures

Mark Kalaj et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Multidisciplinary Sciences

Global threat of arsenic in groundwater

Joel Podgorski et al.

SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Biopolymer@Metal-Organic Framework Hybrid Materials: A Critical Survey

Samir El Hankari et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Review Engineering, Environmental

Metal-organic frameworks for aquatic arsenic removal

C. Wang et al.

WATER RESEARCH (2019)

Add to Collection

Article Materials Science, Characterization & Testing

The Powder Diffraction File: a quality materials characterization database

Stacy Gates-Rector et al.

POWDER DIFFRACTION (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Performance of metal-organic frameworks for the adsorptive removal of potentially toxic elements in a water system: a critical review

Sammani Ramanayaka et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

Hierarchically porous MOF/polymer composites via interfacial nanoassembly and emulsion polymerization

Peng Jin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Review Environmental Sciences

Removal of As(III) and As(V) from water by chitosan and chitosan derivatives: a review

Xianli Wang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2016)

Add to Collection

Review Environmental Sciences

Arsenic and human health effects: A review

Khaja Shameem Mohammed Abdul et al.

ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY (2015)

Add to Collection

Article Chemistry, Physical

Efficient degradation of high concentration azo-dye wastewater by heterogeneous Fenton process with iron-based metal-organic framework

Huanli Lv et al.

JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Mercury CSD 2.0 -: new features for the visualization and investigation of crystal structures

Clare F. Macrae et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and catalytic properties of MIL-100(Fe), an iron(III) carboxylate with large pores

Patricia Horcajada et al.

CHEMICAL COMMUNICATIONS (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.