☆ 4.7 Article

Three-dimensionally multiple protected silicon anode toward ultrahigh areal capacity and stability

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Expired milk powder emulsion-derived carbonaceous framework/Si composite as efficient anode for lithium-ion batteries

Junkai Zhao et al.

Summary: Silicon/carbon composites with N, P codoped carbonaceous framework and carbon-coated silicon were prepared using expired milk powder as a carbon source. The carbon skeleton and shell improved the conductivity of silicon, stabilized the solid electrolyte interfaces, and alleviated the volume expansion of silicon. The composite electrodes showed excellent cycling stability and rate capability, with reversible capacity maintained at 587.3 and 731.2 mAh g-1 after 1000 charge/discharge cycles for FPC@Si and NPC@Si, respectively.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Novel Insight into Rechargeable Aluminum Batteries with Promising Selenium Sulfide@Carbon Nanofibers Cathode

Linlin Li et al.

Summary: Due to the unique electronic structure of aluminum ions (Al3+), traditional electrodes usually exhibit slow kinetic process and inferior rechargeable aluminum batteries (RABs) performance. To solve this problem, a Se2.9S5.1-based cathode with sufficient valence electronic energy overlap with Al3+ and easily accessible structure is developed. This cathode exhibits high capacity, high rate-capacity, robust stability, and enhanced flexibility, and the mechanism of SexSy in RABs is also explored.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Adapting Electrochemical Grinding Strategy for Stable Silicon Anode

Haozheng Wang et al.

Summary: This research proposes an innovative in-situ self-adapting electrochemical grinding (ECG) strategy to address the pulverization issue of silicon anodes during lithiation/delithiation, resulting in stable cycling performance and improved reversible specific capacity. By utilizing MgH2 as a grinding aid, micron-sized Si particles are ground to an equilibrium size during the ECG process, enhancing the electrode's stability and capacity retention.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Suitable thickness of carbon coating layers for silicon anode

Chuanlei Qi et al.

Summary: In this study, core-shell nanostructured Si@C materials with different thickness of carbon coating were prepared using chemical vapor deposition. The Si@C composite with 2-3 carbon coating layers exhibited excellent electrical conductivity and strong mechanical strength, which helped to buffer the volume expansion of silicon nanoparticles.

CARBON (2022)

Add to Collection

Article Chemistry, Physical

Biomass-derived hierarchical N, P codoped porous 3D-carbon framework@TiO2 hybrids as advanced anode for lithium ion batteries

Junkai Zhao et al.

Summary: A novel hierarchical N, P codoped porous 3D-carbon framework@TiO2 nanoparticle hybrid was successfully synthesized in this study, exhibiting superior reversible capacity and cycling stability attributed to its hierarchical porous hollow structure and synergistic contributions from N, P codoped-carbon and TiO2 components.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Liquid Metal Remedies Silicon Microparticulates Toward Highly Stable and Superior Volumetric Lithium Storage

Ziyun Zhao et al.

Summary: The use of liquid metal as a conducting material has been proposed to address expansion and pulverization issues in silicon microparticulate materials used in lithium-ion batteries, improving stability and volumetric lithium storage.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Spontaneous nanominiaturization of silicon microparticles with structural stability as flexible anodes for lithium ion batteries

Zhi Yong Zhang et al.

Summary: The researchers developed a free-standing Si-based film anode with a structure of carbon nanotube networks and carbon nanocoating layer, which improved the long cycling performance of the Si anode, enhanced electronic contact, and maintained lithium storage properties. The Si anode exhibited ultra-high specific capacity and excellent cycling performance, making it suitable for lithium-ion batteries.

CARBON (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Spheres of Graphene and Carbon Nanotubes Embedding Silicon as Mechanically Resilient Anodes for Lithium-Ion Batteries

Jinhui Xu et al.

Summary: Novel anode materials for lithium-ion batteries were synthesized by growing spheres of graphene and carbon nanotubes around silicon particles, resulting in composites with high electrical conductivity and mechanical resiliency. These materials can withstand the high-pressure calendering process in electrode fabrication and the stress induced during charging and discharging of the electrodes.

NANO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Blood clot-inspired viscoelastic fibrin gel: New aqueous binder for silicon anodes in lithium ion batteries

Woong-Ju Kim et al.

Summary: This study introduces a new binder based on fibrin for silicon anodes in lithium-ion batteries. The binder, with abundant polar functional groups and time-dependent viscoelastic behavior, shows better cycling stability and rate performance than other binders. Further optimization by mixing with other binders and ionic cross-linking results in an advanced binder with remarkable cycling stability.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Two-dimensional ultrathin networked CoP derived from Co(OH)2 as efficient electrocatalyst for hydrogen evolution

Junkai Zhao et al.

Summary: The application of hydrogen is a promising way to alleviate global energy pollution. However, the current electrocatalytic hydrogen evolution using noble metals is limited by low kinetics. Therefore, it is urgent to develop non-noble metal electrocatalysts with enhanced efficiency and environmental friendliness. In this study, two-dimensional ultrathin CoP networked materials were successfully synthesized and showed high current density and cyclic stability, suggesting their potential applications in various electrochemical energy conversion and storage fields.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Si-P-Ti stabilized Si-P/Ti3C2Tx nanohybrids for enhanced lithium-ion storage

Deng Wang et al.

Summary: Si-P/Ti3C2Tx composite is a potential candidate for the anode material of next-generation lithium-ion batteries, with high specific capacity and stable electrochemical properties during lithiation/delithiation. It shows promising application prospects in energy storage.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

A self-sacrifice template strategy to synthesize silicon@carbon with interior void space for boosting lithium storage performance

Liwen Liu et al.

Summary: Appropriate void spaces are crucial for improving the performance of silicon anode materials, and internal voids formed by low-temperature calcination of citric acid contribute to stable cycle life and superior rate capability.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Inorganic crosslinked supramolecular binder with fast Self-Healing for high performance silicon based anodes in Lithium-Ion batteries

Junkai Zhao et al.

Summary: In this study, a three-dimensional self-healing binder (PVA + LB) composed of polyvinyl alcohol and lithium metaborate solution is proposed to improve the cycle stability of Si-based lithium-ion batteries. The use of PVA + LB as a binder results in maintained reversible capacity and excellent electrochemical performance of silicon electrodes.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Fast charging of energy-dense lithium-ion batteries

Chao-Yang Wang et al.

Summary: Researchers have achieved fast charging of high-energy density batteries using an asymmetric temperature modulation and a thermally stable dual-salt electrolyte method, allowing for a 75% state of charge in just 12 minutes. They have also developed a digital twin to assess cooling and safety, demonstrating the feasibility of thermally modulated 4C charging with air convection.

NATURE (2022)

Add to Collection

Article Chemistry, Physical

A Multilevel Buffered Binder Network for High-Performance Silicon Anodes

Xin Wan et al.

Summary: The study developed a self-healing binder with a multilevel buffered structure to address structural damage and performance degradation issues caused by volume deformation in silicon anodes. By utilizing a coexistence strategy of dynamic supramolecular interactions and rigid covalent bonds, the binder successfully achieved dynamic reconstruction of the electrode structure, leading to improved cycling stability and capacity retention in silicon electrodes.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Gradient H-Bonding Binder Enables Stable High-Areal-Capacity Si-Based Anodes in Pouch Cells

Linlin Hu et al.

Summary: This study introduces a gradient hydrogen-bonding binder for silicon-based anodes in lithium-ion batteries, which effectively alleviates stress and prevents structure fracture, resulting in stable high-areal-capacity electrodes. The silicon-based pouch cell utilizing this binder demonstrates an impressive capacity retention of 80.2% after 700 cycles, showing great potential for practical applications.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

In-situ formation of Co1-xS hollow polyhedrons anchored on multichannel carbon nanofibers as self-supporting anode for lithium/sodium-ion batteries

Xintong Lian et al.

Summary: A reliable synthetic approach was reported for the in-situ growth of Co-based ZIF-67 on electrospun nanofibers, followed by carbonization and sulfurization to form Co1-xS hollow polyhedrons anchored on multichannel carbon nanofibers (Co1-xS/MCF) for LIBs and SIBs. The resulting binder-free Co1-xS/MCF anode demonstrated advanced electrochemical properties for both LIBs and SIBs, attributed to the unique multichannel nanostructure and Co1-xS hollow polyhedrons providing active sites and reducing structural strain.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Designing Adaptive Binders for Microenvironment Settings of Silicon Anode Particles

Haesung A. Lee et al.

Summary: This study introduces the concept of an adaptive binder to tackle the silicon anode challenge in Li-ion batteries. The binder exhibits adaptable capabilities in response to gradual changes in the microenvironments surrounding silicon particles, with reversible and irreversible chemical interactions stabilizing adhesion to the silicon particle surfaces. The adaptive properties of the binder contribute to maintaining a higher charge capacity after repeated battery cycles, highlighting the importance of adaptability in designing silicon-anode binders.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A mechanically robust self-healing binder for silicon anode in lithium ion batteries

Hao Chen et al.

Summary: Silicon is considered the most promising anode material for next-generation lithium ion batteries, but silicon particles undergo volume changes and pulverization during charge/discharge processes, damaging the longevity of silicon anodes. This study synthesized a novel self-healing binder to repair the damage to silicon anodes, achieving excellent electrochemical performance.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Subnano-sized silicon anode via crystal growth inhibition mechanism and its application in a prototype battery pack

Jaekyung Sung et al.

Summary: Silicon-based anodes are a promising alternative to commonly used graphite anodes in commercial batteries. Researchers have developed a synthesis route for silicon anodes consisting of subnanometre-sized particles, enhancing cycling stability and Coulombic efficiency. The practical application of the fabricated energy storage system demonstrates high cycle life and calendar life retention percentages.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Supercritical CO2-Assisted SiOx/Carbon Multi-Layer Coating on Si Anode for Lithium-Ion Batteries

Rahmandhika Firdauzha Hary Hernandha et al.

Summary: The use of supercritical CO2 for depositing carbon and SiOx layers on silicon particles leads to the development of a unique anode material suitable for lithium-ion batteries. By comparing different carbon precursors, glucose is found to be the most suitable for SCCO2 synthesis. The anode exhibits high specific capacity and good cycling stability at high currents.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In situ formation of ionically conductive nanointerphase on Si particles for stable battery anode

Xiaoxue Chen et al.

Summary: Utilizing solar Si photovoltaic waste as a material for battery anodes can simultaneously solve the problem of solid waste pollution and enable high energy density LIBs. The Si-P core shell structure reduces undesirable side reactions between Si and electrolytes, resulting in stable electrochemical cycling performance.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Review Electrochemistry

Tailoring the structure of silicon-based materials for lithium-ion batteries via electrospinning technology

Aoming Huang et al.

Summary: Silicon shows promise as an anode material for lithium-ion batteries, but challenges like volume variation and low conductivity still need to be addressed. Designing micro-nano structures and composites of heterogeneous materials are effective strategies. Electrospinning technology can help construct unique structures to solve issues with Si-based anodes.

ESCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Overcoming the fundamental challenge of PVDF binder use with silicon anodes with a super-molecular nano-layer

Weibo Huang et al.

Summary: By creating a supramolecular buffer layer on the surface of Si particles, the electrochemical performance of an Si anode using a PVDF binder has been significantly improved, particularly in terms of initial coulombic efficiency, high rate capability, and cycling stability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Room-Temperature Crosslinkable Natural Polymer Binder for High-Rate and Stable Silicon Anodes

Jaegeon Ryu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects

Ersha Fan et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High rate capacity anode of Si-C composite nanofiber wrapped with Cu foam for lithium-ion batteries

Xiaoqiang Tian et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Silicon Anode with High Initial Coulombic Efficiency by Modulated Trifunctional Binder for High-Areal-Capacity Lithium-Ion Batteries

Zeheng Li et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Stable Silicon Anode for Lithium-Ion Batteries through Covalent Bond Formation with a Binder via Esterification

Chul-Ho Jung et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional Rigidity-Reinforced SiOx Anodes with Stabilized Performance Using an Aqueous Multicomponent Binder Technology

Tianxing Kang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Room-Temperature Liquid Metal Confined in MXene Paper as a Flexible, Freestanding, and Binder-Free Anode for Next-Generation Lithium-Ion Batteries

Chuanliang Wei et al.

SMALL (2019)

Add to Collection

Article Chemistry, Physical

Polyvinyl alcohol grafted poly (acrylic acid) as water-soluble binder with enhanced adhesion capability and electrochemical performances for Si anode

Jiarong He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Electrochemistry

Citric Acid Based Pre-SEI for Improvement of Silicon Electrodes in Lithium Ion Batteries

K. W. D. Kaveendi Chandrasiri et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Ionically Conductive Self-Healing Binder for Low Cost Si Microparticles Anodes in Li-Ion Batteries

Takatoshi Munaoka et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Enhanced Ion Conductivity in Conducting Polymer Binder for High-Performance Silicon Anodes in Advanced Lithium-Ion Batteries

Wenwu Zeng et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Spontaneous repairing liquid metal/Si nanocomposite as a smart conductive-additive-free anode for lithium-ion battery

Bing Han et al.

NANO ENERGY (2018)

Add to Collection

Article Electrochemistry

Utilizing Room Temperature Liquid Metals for Mechanically Robust Silicon Anodes in Lithium-Ion Batteries

Sashini N. S. Hapuarachchi et al.

BATTERIES & SUPERCAPS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Binder-Free and Free-Standing Cobalt Sulfide@Carbon Nanotube Cathode Material for Aluminum-Ion Batteries

Yuxiang Hu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Improved Cycling Performance of a Si Nanoparticle Anode Utilizing Citric Acid as a Surface-Modifying Agent

Cao Cuong Nguyen et al.

LANGMUIR (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Double Core-Shell Si@C@SiO2 for Anode Material of Lithium-Ion Batteries with Excellent Cycling Stability

Tao Yang et al.

CHEMISTRY-A EUROPEAN JOURNAL (2017)

Add to Collection

Article Chemistry, Physical

Honeysuckle-derived hierarchical porous nitrogen, sulfur, dual-doped carbon for ultra-high rate lithium ion battery anodes

Junke Ou et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A high-performance nanoporous Si/Al2O3 foam lithium-ion battery anode fabricated by selective chemical etching of the Al-Si alloy and subsequent thermal oxidation

Gaeun Hwang et al.

CHEMICAL COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

Integration of Si in a metal foam current collector for stable electrochemical cycling in Li-ion batteries

Chunsong Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Interpenetrated Gel Polymer Binder for High-Performance Silicon Anodes in Lithium-ion Batteries

Jiangxuan Song et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Tin-indium/graphene with enhanced initial coulombic efficiency and rate performance for lithium ion batteries

Hongxun Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene-Encapsulated Si on Ultrathin-Graphite Foam as Anode for High Capacity Lithium-Ion Batteries

Junyi Ji et al.

ADVANCED MATERIALS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.