4.7 Article

Ferroelectric-Enhanced cathode kinetics toward High-Performance aqueous Zinc-Ion batteries

Related references

Note: Only part of the references are listed.
Article Chemistry, Inorganic & Nuclear

Integrating a Ferroelectric Interface with a Well-Tuned Electronic Structure in Lithium-Rich Layered Oxide Cathodes for Enhanced Lithium Storage

Chunxiao Zhang et al.

Summary: Through La/Al codoping and Bi0.5Na0.5TiO3 (BNT) coating, the electronic structure of LLOs is tuned and a ferroelectric interface is constructed on their surface. The synergistic effect of the ferroelectric interface and the well-tuned electronic structure not only promotes Li+ diffusion and hinders On- migration, but also suppresses lattice volume changes and reduces interfacial side reactions at voltage up to 4.9 V vs Li+/Li. As a result, the modified material exhibits enhanced initial capacities and retention rates of 224.4 mAh g-1 and 78.57% after 500 cycles at 2.0-4.65 V and 231.7 mAh g(-1) and 85.76% after 200 cycles at 2.0-4.9 V at 1C, respectively.

INORGANIC CHEMISTRY (2023)

Article Nanoscience & Nanotechnology

Enabling Reversible MnO2/Mn2+ Transformation by Al3+ Addition for Aqueous Zn-MnO2 Hybrid Batteries

Zengming Qin et al.

Summary: A new Zn-MnO2 hybrid battery using Al3+ in the sulfate-based electrolyte is proposed, which exhibits excellent electrochemical performance and cycle life while avoiding environmental hazards and corrosion of the Zn anodes.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Controlled Deposition of Zinc-Metal Anodes via Selectively Polarized Ferroelectric Polymers

Yizhou Wang et al.

Summary: A novel strategy is proposed in this study to prevent zinc dendrite growth in aqueous zinc-ion batteries by using a selectively polarized ferroelectric polymer material as a protective layer on the zinc anodes. This approach enables long cycling lifespan and high rate performance of the batteries. The work provides insight into protecting zinc anodes and potentially other metal anodes using polymer ferroelectricity.

ADVANCED MATERIALS (2022)

Article Multidisciplinary Sciences

Open challenges and good experimental practices in the research field of aqueous Zn-ion batteries

Giorgia Zampardi et al.

Summary: Aqueous zinc-ion batteries have potential as stationary storage systems for power-grid applications, but certain challenges need to be addressed and experimental practices need to be aligned with industrial working conditions to promote their commercialization.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Multidisciplinary

An Optical/Ferroelectric Multiplexing Multidimensional Nonvolatile Memory from Ferroelectric Polymer

Shan He et al.

Summary: This study demonstrates the multiplexing of optical and ferroelectric signals for storage in a PVDF ultrathin film, expanding the range of material supporting physical dimensions multiplexing beyond optical storage material. The achieved storage density and data security are high, making it a promising approach for future high-capacity and multifunctional nano-memory.

ADVANCED MATERIALS (2022)

Article Chemistry, Applied

Aqueous Zn-MnO2 battery: Approaching the energy storage limit with deep Zn2+ pre-intercalation and revealing the ions insertion/extraction mechanisms

Yaxiong Zhang et al.

Summary: This study achieved deep Zn2+ ions intercalated delta-MnO2 (Zn-MnO2) as the cathode material for AZIBs, significantly enhancing the diffusion ability of Zn2+ and delivering a record capacity. The deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Physical

Achieving high-rate and durable aqueous rechargeable Zn-Ion batteries by enhancing the successive electrochemical conversion reactions

Xiaosha Cui et al.

Summary: This research proposes a strategy to enhance the electrochemical performance of rechargeable aqueous Zn-ion batteries (AZIBs) by improving the successive electrochemical conversion reactions. By designing the electrode with a rational approach, an even and homogeneous electric field is achieved, leading to significantly improved efficiency of the electrochemical conversion reactions. The reversibility behaviors of byproducts are found to play a crucial role in determining the charge-discharge process and cycling stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Review Chemistry, Multidisciplinary

Artificial Interphase Layer for Stabilized Zn Anodes: Progress and Prospects

Qihui Zhang et al.

Summary: This review focuses on the latest research progress in the design of artificial interphase layers (AIL) for zinc anode protection, including the classification of functional materials, preparation methods, mechanism investigations, and device performances. The origins of zinc instability are explained from the perspectives of electrical field, mass transfer, and nucleation process, followed by a comprehensive summary of the functions and design criteria of AIL. Finally, current challenges and future outlooks are discussed based on theoretical and experimental considerations.

SMALL (2022)

Article Chemistry, Physical

Hydrogen-Bond Reinforced Superstructural Manganese Oxide As the Cathode for Ultra-Stable Aqueous Zinc Ion Batteries

Jianwei Li et al.

Summary: A new class of layered manganese oxides, Mg0.9Mn3O7·2.7H2O, is proposed as a robust cathode for high-performance aqueous zinc-ion batteries. It delivers high capacity and exceptional cycling stability due to its unique motif and interstratified hydrogen bond, which minimize manganese migration/dissolution and exhibit quasi-zero-strain characteristics. The revealed structure-function insights pave the way for rational design of superstructural cathodes for reversible aqueous zinc-ion batteries.

ADVANCED ENERGY MATERIALS (2022)

Article Engineering, Environmental

Al-Intercalated MnO2 cathode with reversible phase transition for aqueous Zn-Ion batteries

Cong Chen et al.

Summary: The novel Al-intercalation engineering of MnO2 cathode for aqueous ZIBs significantly improves specific capacity and cycling retention, demonstrating great potential for applications in energy technologies and portable/wearable electronics.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Stabilizing zinc deposition with sodium lignosulfonate as an electrolyte additive to improve the life span of aqueous zinc-ion batteries

Weijun Zhou et al.

Summary: Low-cost sodium lignosulfonate was used as an electrolyte additive to improve the cyclability of rechargeable zinc-ion batteries, resulting in enhanced capacity retention and cycle life.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

A self-healing neutral aqueous rechargeable Zn/MnO2 battery based on modified carbon nanotubes substrate cathode

Hao Chen et al.

Summary: A capacity self-healing aqueous Zn/MnO2 battery was proposed using carboxyl-modified carbon nanotubes as the cathode substrate, achieving or recovering specific capacity by controllable electrodeposition of MnO2, significantly improving cycling performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Inhibition of Manganese Dissolution in Mn2O3 Cathode with Controllable Ni2+ Incorporation for High-Performance Zinc Ion Battery

Dongdong Zhang et al.

Summary: A Ni-doped Mn2O3 cathode has been developed in this study to suppress the dissolution of manganese and improve the electrochemical performance, showing high specific capacity and excellent capacity retention over cycles. The doped Ni effectively stabilizes the Mn2O3 structure, demonstrating a promising strategy for future development of ZIBs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Interlayer Engineering of Preintercalated Layered Oxides as Cathode for Emerging Multivalent Metal-ion Batteries: Zinc and Beyond

Xun Zhao et al.

Summary: Typical layered structures with large capacity, such as alpha-, delta-V2O5, delta-MnO2, and alpha-MoO3, have poor electrical conductivity and suffer from severe structural deterioration and sluggish diffusion kinetics during charging/discharging. Interlayer engineering of preintercalation strategies has offered effective solutions to stabilize these structures. Various substances like water molecules, alkali cations, transition metal cations, and organic molecules have been proven to enhance diffusion kinetics and stability, especially in emerging multivalent metal-ion batteries like rechargeable aqueous zinc ion batteries. This review clarifies the crystal structures, preparation methods, characterization techniques, mechanistic insights, and applications of preintercalated layered oxides in multivalent metal-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Fast ion diffusion kinetics based on ferroelectric and piezoelectric effect of SnO2/BaTiO3 heterostructures for high-rate sodium storage

Rui Li et al.

Summary: This study introduces a tin oxide/barium titanate heterostructure encapsulated in nitrogen-doped carbon nanofibers as a sodium ion battery anode, and utilizes the ferroelectric and piezoelectric effect to boost the rate performance of the anode.

NANO ENERGY (2021)

Article Engineering, Environmental

Zn anode with flexible β-PVDF coating for aqueous Zn-ion batteries with long cycle life

Luong Trung Hieu et al.

Summary: This study successfully enhanced the performance of aqueous zinc ion batteries by coating the Zn anode with a thin protective layer of beta-PVDF, resulting in reduced overpotential and improved cyclic stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Multidisciplinary

Zn Metal Anodes for Zn-Ion Batteries in Mild Aqueous Electrolytes: Challenges and Strategies

Vo Pham Hoang Huy et al.

Summary: Rechargeable aqueous Zn-ion batteries have attracted significant interest as potential alternatives to lithium-ion batteries due to their low cost and high theoretical capacity, but constraints associated with Zn metal anodes have hindered further advancements in this technology. Various strategies have been proposed to overcome the limitations of Zn metal anodes, but a successful solution has not yet been developed.

NANOMATERIALS (2021)

Review Chemistry, Multidisciplinary

Application of Carbon Materials in Aqueous Zinc Ion Energy Storage Devices

Ziting Wang et al.

Summary: This article reviews widely used carbon materials in zinc ion storage devices and highlights their unique roles and advantages in both zinc ion supercapacitors and zinc ion batteries. Characteristics and functionalizations of different carbon materials are compared in the context of zinc-ion energy storage devices.

SMALL (2021)

Article Chemistry, Multidisciplinary

Employing the Dynamics of the Electrochemical Interface at Aqueous Zinc-Ion Battery Cathode

Nigel Becknell et al.

Summary: This study demonstrates that the intrinsic instability of an electrochemical interface can be turned from an obstacle into an advantage in aqueous zinc-ion batteries, where manganese oxide (MnO2) shows considerable dissolution even in electrolyte containing Mn2+ salt. Balancing with redeposition can alleviate the harmful impact of dissolution on performance and alter the trajectory of the active phase.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Applied

Guest ions pre-intercalation strategy of manganese-oxides for supercapacitor and battery applications

Lina Chen et al.

Summary: This review systematically summarizes recent advances in cation preintercalation engineering in Mn-based electrode materials, aiming to improve the performance of secondary batteries by expanding interlayer space, stabilizing structure, and controlling composition.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

Impact of Binder Functional Groups on Controlling Chemical Reactions to Improve Stability of Rechargeable Zinc-Ion Batteries

Natta Jaikrajang et al.

Summary: This study investigates the effects of different chemical structure binders on the performance and cycling stability of rechargeable zinc-ion batteries, with results showing that ZIBs based on CMC exhibit superior battery reactions and cycling stability.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

A relaxor ferroelectric polymer with an ultrahigh dielectric constant largely promotes the dissociation of lithium salts to achieve high ionic conductivity

Yan-Fei Huang et al.

Summary: In this study, a novel approach using a relaxor ferroelectric (RFE) polymer of P(VDF-TrFE-CTFE) as the matrix of solid-state polymer electrolytes (SPEs) significantly increased the ionic conductivity in solid-state lithium metal batteries. The high dielectric constant of P(VDF-TrFE-CTFE) enabled enhanced solvation ability towards lithium ions and promoted dissociation, resulting in improved charge carrier mobility. The hybrid electrolytes with larger dielectric constant showed higher ionic conductivity, and tight interfaces of P(VDF-TrFE-CTFE) based SPEs ensured stable interfacial resistance during cycling, leading to stable cycling performance in LiFePO4/Li and LiNi0.8Co0.1Mo0.1O2/Li batteries at 25 degrees C. This work suggests a new research direction to construct SPEs with high ionic conductivity by increasing the dielectric constant of polymers.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Effects of water-based binders on electrochemical performance of manganese dioxide cathode in mild aqueous zinc batteries

Hee Jung Chang et al.

Summary: The study demonstrates that using sodium carboxymethyl cellulose (CMC) binder significantly improves the electrochemical performance of Zn/MnO2 aqueous batteries, offering desirable adhesion, wettability, and chemical stability.

CARBON ENERGY (2021)

Article Materials Science, Multidisciplinary

Interfacial adsorption-insertion mechanism induced by phase boundary toward better aqueous Zn-ion battery

Lutong Shan et al.

Summary: In this study, a biphasic vanadate material was reported, and a novel interfacial adsorption-insertion mechanism induced by phase boundaries was detected. First-principles calculations showed that this mechanism can enhance specific capacity, reduce diffusion energy barrier, and promote faster reaction kinetics.

INFOMAT (2021)

Article Chemistry, Physical

Hydroxide ion dependent α-MnO2 enhanced via oxygen vacancies as the negative electrode for high-performance supercapacitors

Yucheng Chen et al.

Summary: This study investigates the applicability and energy storage mechanism of manganese dioxide (MnO2) as a negative electrode material for supercapacitors, comparing different crystalline forms of MnO2 and improving its performance by introducing oxygen vacancies. Experimental and theoretical analysis reveal the unique charge storage process of MnO2 as a negative electrode under alkaline conditions, providing insights for the development of high-performance supercapacitors.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Preintercalation Strategy in Manganese Oxides for Electrochemical Energy Storage: Review and Prospects

Qinghe Zhao et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes

Xuesong Xie et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

An Electrolytic Zn-MnO2 Battery for High-Voltage and Scalable Energy Storage

Dongliang Chao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Dendrite-Free Zinc Deposition Induced by Multifunctional CNT Frameworks for Stable Flexible Zn-Ion Batteries

Yinxiang Zeng et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

A Superior δ-MnO2 Cathode and a Self-Healing Zn-δ-MnO2 Battery

Donghong Wang et al.

ACS NANO (2019)

Article Chemistry, Physical

Built-in oriented electric field facilitating durable Zn-MnO2 battery

Sitian Lian et al.

NANO ENERGY (2019)

Article Nanoscience & Nanotechnology

Electrolyte Effect on the Electrochemical Performance of Mild Aqueous Zinc-Electrolytic Manganese Dioxide Batteries

Huilin Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

The Charge Storage Mechanisms of 2D Cation-Intercalated Manganese Oxide in Different Electrolytes

Qingnuan Zhang et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Zinc ion stabilized MnO2 nanospheres for high capacity and long lifespan aqueous zinc-ion batteries

Jinjin Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Physical

Recent Advances in Aqueous Zinc-Ion Batteries

Guozhao Fang et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Multidisciplinary

Cation-Deficient Spinel ZnMn2O4 Cathode in Zn(CF3SO3)2 Electrolyte for Rechargeable Aqueous Zn-Ion Battery

Ning Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Review Polymer Science

Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications

P. Martins et al.

PROGRESS IN POLYMER SCIENCE (2014)

Article Engineering, Electrical & Electronic

Temperature Control of P(VDF-TrFE) Copolymer Thin Films

Tingting Feng et al.

INTEGRATED FERROELECTRICS (2013)

Article Chemistry, Multidisciplinary

Novel ferroelectric polymer composites with high dielectric constants

ZM Dang et al.

ADVANCED MATERIALS (2003)