☆ 4.7 Article

Multi-layering of carbon conductivity enhancers for boosting rapid recharging performance of high mass loading lithium ion battery electrodes

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2024)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Cathodes Coating Layer with Li-Ion Diffusion Selectivity Employing Interactive Network of Metal-Organic Polyhedras for Li-Ion Batteries

You Jin Kim et al.

Summary: This study proposes a method to fabricate dual functional coating materials using metal-organic polyhedra (MOP) for stabilizing the surface of lithium-ion battery cathodes and facilitating ion diffusion. The results show that the MOPAC-coated Ni-rich layered cathode exhibits better cycle retention and enhanced kinetic properties compared to the pristine and MOP-coated cathodes.

SMALL (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Electrochemical Performance of Rare-Earth Metal-Ion- Doped Nanocrystalline Li4Ti5O12 Electrodes in High-Power Li-Ion Batteries

A. Lakshmi-Narayana et al.

Summary: A comprehensive and comparative exploration research reveals the enhanced electrochemical performance of nanocrystalline RE-LTO electrodes in high-power Li-ion batteries, through the fundamental mechanisms of rare-earth metal-ion doping into Li4Ti5O12.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Improved electrochemical performance using well-dispersed carbon nanotubes as conductive additive in the Ni-rich positive electrode of lithium-ion batteries

Jae Hong Choi et al.

Summary: The researchers propose a strategy to fabricate the positive electrode with well-dispersed carbon nanotubes (CNTs), which improves the capacity retention and cycle ability of the battery. By controlling the solid content and sonication process, CNTs are evenly distributed in the electrode, leading to stable electrochemical performance.

ENVIRONMENTAL MODELLING & SOFTWARE (2023)

Add to Collection

Article Optics

Performance improvement approaches for optical fiber SPR sensors and their sensing applications

Jianying Jing et al.

Summary: This review outlines the promising applications of optical fiber surface plasmon resonance (SPR) sensors in biomarker detection, food allergen screening, and environmental monitoring. The review also highlights approaches to improve the sensing performance of fiber SPR sensors, including sensitivity, accuracy, selectivity, and convenience. Additionally, the review discusses the sensing principles of SPR sensors and current technologies for enhancing fiber SPR performance through substrate design, intrinsic layer modification, and surface nanomaterials.

PHOTONICS RESEARCH (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing the Charging Performance of Lithium-Ion Batteries by Reducing SEI and Charge Transfer Resistances

Zongjian Li et al.

Summary: In order to improve the charging performance of electric vehicles, researchers have developed an ether-based electrolyte that shows significantly better performance than commercial carbonate electrolytes. The improved charging performance is attributed to reduced SEI resistance and charge transfer resistance. While the ether-based electrolyte has the potential to enhance battery charging performance, the gelation of the electrolyte may limit the cycling performance in full cells.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Patterning Design of Electrode to Improve the Interfacial Stability and Rate Capability for Fast Rechargeable Solid-State Lithium-Ion Batteries

Minho Kim et al.

Summary: Patterned electrodes have been developed to improve fast-charging attributes in solid-state lithium-ion batteries by enhancing electrochemically activated surfaces within the electrodes. The study demonstrates the potential of patterned electrodes in improving electrode dynamics through customized empty channel structures and a composite electrolyte.

NANO LETTERS (2022)

Add to Collection

Review Chemistry, Physical

Porous Electrode Modeling and its Applications to Li-Ion Batteries

Zhiqiang Chen et al.

Summary: This review systematically summarizes and discusses the applications of the porous electrode model to Li-ion batteries (LIBs). The porous electrode model allows for the study of various internal battery properties and can predict battery degradation. With the help of state observers, the porous electrode model enables real-time monitoring for battery management systems.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Optics

Integration and Applications of Nanomaterials for Ultrafast Photonics

Xiaoli Zhao et al.

Summary: Nanomaterials have great potential for applications in ultrafast photonics due to their exceptional properties. This review discusses the integration and applications of nanomaterials in ultrafast photonics, covering various methods and characteristics of different types of nanomaterials.

LASER & PHOTONICS REVIEWS (2022)

Add to Collection

Article Electrochemistry

Smart Multi-Layer Architecture Electrodes for High Energy Density Lithium-Ion Capacitors

Sang Ho Lee

Summary: Multi-layer architectures using complementary material combinations were developed to enhance the energy density and power performance of hybrid lithium-ion capacitors.

BATTERIES & SUPERCAPS (2022)

Add to Collection

Article Optics

Unraveling the Excitonic Transition and Associated Dynamics in Confined Long Linear Carbon Chains with Time-Resolved Resonance Raman Scattering

Jingyi Zhu et al.

Summary: Long linear carbon chains in carbon nanotubes exhibit unique properties, such as tunable direct energy gap and high Raman response cross section, with exciton relaxation dynamics occurring on a longer timescale. Strong coupling between the confined carbon chains and the nanotube host facilitates efficient energy transfer, as observed in the experimental study.

LASER & PHOTONICS REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

Multi-layered composite electrodes of high power Li4Ti5O12 and high capacity SnO2 for smart lithium ion storage

Sang Ho Lee et al.

Summary: Through discrete layering and optimized electrochemical behavior, a multi-layered composite electrode was utilized to explore new capacity-power combinations, showing remarkable rate capability and energy density in both lithium ion batteries and capacitors.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Electrode Degradation in Lithium-Ion Batteries

Joshua P. Pender et al.

ACS NANO (2020)

Add to Collection

Article Thermodynamics

A numerical study on the thermal performance of prismatic li-ion batteries for hibrid electric aircraft

Ozge Yetik et al.

ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Optimizition of Graphite-SiO blend electrodes for lithium ion batteries: Stable cycling enabled by single-walled carbon nanotube conductive additive

Joel Kirner et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Enhancing electrochemical performance of thin film lithium ion battery via introducing tilted metal nanopillars as effective current collectors

Zhimin Qi et al.

NANO ENERGY (2020)

Add to Collection

Article Energy & Fuels

Scalable Multilayer Printing of Graphene Interfacial Layers for Ultrahigh Power Lithium-Ion Storage

Sang Ho Lee et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

High energy lithium ion capacitors using hybrid cathodes comprising electrical double layer and intercalation host multi-layers

Sang Ho Lee et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Micro-scale graded electrodes for improved dynamic and cycling performance of Li-ion batteries

Chuan Cheng et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Layer-by-layer printing of multi-layered heterostructures using Li4Ti5O12 and Si for high power Li-ion storage

Sang Ho Lee et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Scalable, Large-Area Printing of Pore-Array Electrodes for Ultrahigh Power Electrochemical Energy Storage

Sang Ho Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Spray-Printed and Self-Assembled Honeycomb Electrodes of Silicon-Decorated Carbon Nanofibers for Li-Ion Batteries

Sang Ho Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

A systematic approach for electrochemical-thermal modelling of a large format lithium-ion battery for electric vehicle application

Elham Hosseinzadeh et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Spray printing of self-assembled porous structures for high power battery electrodes

Sang Ho Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Energy & Fuels

Carbon-Encapsulated SnO2 Core Shell Nanowires Directly Grown on Reduced Graphene Oxide Sheets for High-Performance Li-Ion Battery Electrodes

Sang Ho Lee et al.

ENERGY TECHNOLOGY (2018)

Add to Collection

Article Electrochemistry

Spray printing and optimization of anodes and cathodes for high performance Li-Ion batteries

Sang Ho Lee et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Multidisciplinary Sciences

Engineering stable interfaces for three-dimensional lithium metal anodes

Jin Xie et al.

SCIENCE ADVANCES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Before Li Ion Batteries

Martin Winter et al.

CHEMICAL REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

Fabrication of hierarchically branched SnO2 nanowires by two-step deposition method and their applications to electrocatalyst support and Li ion electrode

Sang Ho Lee et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Study of the lithium diffusion properties and high rate performance of TiNb6O17 as an anode in lithium secondary battery

Yong-Seok Lee et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Review Chemistry, Physical

A review of gassing behavior in Li4Ti5O12-based lithium ion batteries

Cuiping Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Nanoscience & Nanotechnology

A Strategy for Synthesis of Nanosheets Consisting of Alternating Spinel Li4Ti5O12 and Rutile TiO2 Lamellas for High-Rate Anodes of Lithium-Ion Batteries

Libo Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Encapsulating Sn Nanoparticles in Amorphous Carbon Nanotubes for Enhanced Lithium Storage Properties

Xiaosi Zhou et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Nickel titanate lithium-ion battery anodes with high reversible capacity and high-rate long-cycle life performance

Akbar I. Inamdar et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Electrochemistry

Thermal Effect of Cooling the Cathode Grid Tabs of a Lithium-Ion Pouch Cell

Stephen J. Bazinski et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Fuel cell and Li-ion battery direct hybridization system for aircraft applications

Akira Nishizawa et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

In-situ observation of inhomogeneous degradation in large format Li-ion cells by neutron diffraction

Lu Cai et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.