☆ 4.7 Article

Synthesis of amphiphilic functional terpolymers towards preparation of high flux, anti-fouling, micropollutant-capturing ultrafiltration membranes

JOURNAL OF CLEANER PRODUCTION (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Life cycle assessment of reverse osmosis for high-salinity seawater desalination process: Potable and industrial water production

Samaneh Fayyaz et al.

Summary: Seawater desalination is a global solution to water supply, especially for countries with limited water resources. This study assessed the life cycle environmental impacts of seawater reverse osmosis powered by fossil fuels, including the impact of brine rejection and solid waste. The results showed that reducing electricity consumption could significantly decrease the environmental impacts. This study provides a baseline for further comparisons.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection

Article Environmental Sciences

Preparation of polyvinyl chloride (PVC) membrane blended with acrylamide grafted bentonite for oily water treatment

Tausif Ahmad et al.

Summary: This study focuses on improving the hydrophilicity, morphology, and antifouling characteristics of polyvinyl chloride (PVC) membranes for separating oily wastewater by incorporating modified bentonite. The surface of bentonite nanoparticles is modified using surface-initiated atom transfer radical polymerization (SI-ATRP) with acrylamide grafted bentonite (AAm-g-bentonite). Various techniques, such as FTIR, TGA, sedimentation tests, FE-SEM, etc., are employed to study the modified bentonite nanoparticles. A flat-sheet PVC-based membrane is prepared by blending AAm-g-bentonite using the nonsolvent induced phase separation (NIPS) technique. The performance of the mixed-matrix membranes is characterized using FE-SEM, FTIR, sedimentation test, contact angle, porosity, antifouling property, and filtration studies of pure and oily water. The presence of modified bentonite (AAm-g-bentonite) improves membrane performance, with the best result achieved at PVC/AAm-g-ben-8 (8 wt% of AAm-g-bentonite), exhibiting enhanced pure water flux, permeate flux, and oil rejection.

CHEMOSPHERE (2023)

Add to Collection

Review Engineering, Chemical

A critical review on porous substrates of TFC polyamide membranes: Mechanisms, membrane performances, and future perspectives

Lu Elfa Peng et al.

Summary: Recent studies show that the performance of TFC membranes is significantly affected by their substrates, influencing the formation of polyamide rejection layers and regulating water and solute transport pathways. This comprehensive review evaluates the effects of substrate pore structure and chemistry on water permeance, selectivity, and fouling performance of TFC membranes, providing insights for future membrane development and optimization.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

The stabilization of ultrafiltration membrane blended with randomly structured amphiphilic copolymer: Micropollutants adsorption properties in filtration processes

Ying Li et al.

Summary: A blend membrane composed of PVDF and a tertiary amine containing random copolymer was fabricated for the removal of micropollutants from aqueous solutions. The membrane showed high capture and recovery efficiency for sunset yellow dye. Through a 3-cycle capture-recovery test, the membrane demonstrated high recovery ratio and concentration ratio.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of inorganic salts in the casting solution on morphology of poly (vinyl chloride)/bentonite ultrafiltration membranes

Tausif Ahmad et al.

Summary: Modified polyvinyl chloride (PVC) composite ultrafiltration (UF) membranes were prepared by blending bentonite and different salts, and their effects on phase inversion and membrane properties were investigated. The results showed that the addition of an appropriate amount of salt can enhance the performance of the membranes, with the best results obtained for the addition of 1.0g KCl.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Engineering, Chemical

Tailoring the micro-structure of PVC/SMA-g-PEG blend ultrafiltration membrane with simultaneously enhanced hydrophilicity and toughness by in situ reaction-controlled phase inversion

Rui Chen et al.

Summary: The morphology of PVC/SMA-g-PEG blend ultrafiltration membrane was tailored using an in-situ reaction controlled non-solvent induced phase separation method. By adding PEG to the casting solution, the hydrophilicity and mechanical elongation of the membrane were enhanced. The resultant membrane demonstrated high pure water permeance, excellent toughness, and anti-fouling performance.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

Poly(ionic liquid) copolymer blended polyvinyl chloride ultrafiltration membranes with simultaneously improved persistent hydrophilicity and pore uniformity

Si-Hua Liu et al.

Summary: This study designed and synthesized a poly(ionic liquid) copolymer to modify the hydrophilicity and pore structure of ultrafiltration membranes, resulting in improved membrane performance. The modified membranes showed significantly increased pure water flux, mechanical strength, and flux recovery rate. The stable presence of the copolymer in the membrane ensured the maintained hydrophilicity even after continuous washing for 30 days.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental and theoretical investigations on fouling resistant cellulose acetate/SiO2 NPs/PEDOT ultrafiltration nanocomposite membranes

Mehrez E. El-Naggar et al.

Summary: A new fouling resistant ultrafiltration nanocomposite membrane was fabricated by incorporating SiO2 NPs and PEDOT into the CA matrix, showing high flux, high separation ability and high fouling resistance. The performance of the membrane was enhanced by improving membrane characteristics by including PEDOT into the CA matrix, making membrane technology more suitable for practical applications.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Engineering, Chemical

Polyvinyl chloride-based membranes: A review on fabrication techniques, applications and future perspectives

Mahdie Safarpour et al.

Summary: This study provides an overview of recent developments in the application and modification of PVC membranes, highlighting various applications such as water and wastewater treatment, ion exchange, gas separation, pervaporation, electromembrane extraction, and composite membranes support. It reviews the preparation methods and applications of PVC membranes, as well as the modification methods to achieve desired morphology, performance, and stability, along with discussing the challenges and future perspectives of commercial PVC membranes.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Amphiphilic surface construction and properties of PVC-g-PPEGMA/PTFEMA graft copolymer membrane

Hailiang Liu et al.

Summary: The amphiphilic PVC-g-PPEGMA/PTFEMA graft copolymer membrane, designed and synthesized through free radical polymerization, demonstrates excellent antifouling properties and long-term hydrophilic stability due to the synergistic effect of hydrophilic and low surface energy segments.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Green and sustainable method of manufacturing anti-fouling zwitterionic polymers-modified poly(vinyl chloride) ultrafiltration membranes

Wancen Xie et al.

Summary: The study utilized a green solvent and environmentally friendly reaction method to fabricate PVC UF membranes with excellent fouling resistance, achieving good membrane performance in a short grafting time, providing a new approach to reduce environmental impacts.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the solvent nature on the structure and performance of poly(amide-imide) ultrafiltration membranes

A. V. Bildyukevich et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Optimal synthesis, characterization and antifouling performance of Pluronic F127/bentonite-based super-hydrophilic polyvinyl chloride ultrafiltration membrane for enhanced oilfield produced water treatment

Tausif Ahmad et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Add to Collection

Review Green & Sustainable Science & Technology

A review of emerging trends in membrane science and technology for sustainable water treatment

Ahmed Yusuf et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Chemical

Hot-pressed PAN/PVDF hybrid electrospun nanofiber membranes for ultrafiltration

Zhao Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Facile optimization methods of polyvinyl chloride porous membranes with improved tensile strength

Nana Liu et al.

DESALINATION AND WATER TREATMENT (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent trends of heavy metal removal from water/wastewater by membrane technologies

N. Abdullah et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Article Engineering, Chemical

Properties of polyvinyl chloride (PVC) ultrafiltration membrane improved by lignin: Hydrophilicity and antifouling

Ming Yong et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Engineering, Environmental

A positively charged tight UF membrane and its properties for removing trace metal cations via electrostatic repulsion mechanism

Ming-Yong Zhou et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Cr(VI) Adsorption on Engineered Iron Oxide Nanoparticles: Exploring Complexation Processes and Water Chemistry

Zezhen Pan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Review Engineering, Chemical

The upper bound of thin-film composite (TFC) polyamide membranes for desalination

Zhe Yang et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Blended PVC/PVC-g-PEGMA ultrafiltration membranes with enhanced performance and antifouling properties

Haibo Wu et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

Hierarchically porous carbon derived from metal-organic frameworks for separation of aromatic pollutants

Wei Teng et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced antifouling performance of halloysite nanotubes (HNTs) blended poly(vinyl chloride) (PVC/HNTs) ultrafiltration membranes: For water treatment

Gourav Mishra et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Add to Collection

Article Engineering, Chemical

Novel ultrafiltration membranes with excellent antifouling properties and chlorine resistance using a poly(vinyl chloride)-based copolymer

Sheng-Yao Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Advanced ultrafiltration membranes by leveraging microphase separation in macrophase separation of amphiphilic polysulfone block copolymers

Wei Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Article Engineering, Environmental

Internal pore decoration with polydopamine nanoparticle on polymeric ultrafiltration membrane for enhanced heavy metal removal

Xiaofeng Fang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Engineering, Environmental

Novel adsorptive ultrafiltration membranes derived from polyvinyltetrazole-co-polyacrylonitrile for Cu(II) ions removal

Mahendra Kumar et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Engineering, Environmental

Understanding the sorption mechanisms of aflatoxin B1 to kaolinite, illite, and smectite clays via a comparative computational study

Fuxing Kang et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Engineering, Chemical

Constructing asymmetric membranes via surface segregation for efficient carbon capture

Shaofei Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection

Article Engineering, Chemical

Tertiary amine block copolymer containing ultrafiltration membrane with pH-dependent macromolecule sieving and Cr(VI) removal properties

Zhikan Yao et al.

DESALINATION (2015)

Add to Collection

Article Engineering, Chemical

Surface modification of UF membranes with functionalized MWCNTs to control membrane fouling by NOM fractions

Langming Bai et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

Surface modification of PES ultrafiltration membrane by polydopamine coating and poly(ethylene glycol) grafting: Morphology, stability, and anti-fouling

Fang Li et al.

DESALINATION (2014)

Add to Collection

Article Engineering, Chemical

Low-biofouling membranes prepared by liquid-induced phase separation of the PVDF/polystyrene-b-poly (ethylene glycol) methacrylate blend

Antoine Venault et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Review Engineering, Environmental

Fouling and cleaning of ultrafiltration membranes: A review

Xiafu Shi et al.

JOURNAL OF WATER PROCESS ENGINEERING (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Superhydrophobic and Superoleophilic PVDF Membranes for Effective Separation of Water-in-Oil Emulsions with High Flux

Wenbin Zhang et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Polymer Science

Anisotropic Nanoparticles with Controllable Morphologies from Non-Cross-Linked Seeded Emulsion Polymerization

Qun Niu et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2013)

Add to Collection

Article Environmental Sciences

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Yan Zhang et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2011)

Add to Collection

Article Polymer Science

Preparation and characterization of composite resin by vinyl chloride grafted onto poly(BA-EHA)/poly(MMA-St)

MW Pan et al.

POLYMER (2003)

Add to Collection

Article Polymer Science

Synthesis and structure of poly(vinyl chloride)

K Endo

PROGRESS IN POLYMER SCIENCE (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.