☆ 4.7 Article

A coordination-driven interface system for improving the performance of high-filled bamboo fiber /poly (butylene succinate-co-butylene adipate) (PBSA) biocomposites

JOURNAL OF CLEANER PRODUCTION (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Reinforcement of polyamide 6 with carbon fiber surface modified by a polar cross-linked network interfacial phase

Chengjun Xiao et al.

Summary: Researchers synthesized an epoxy resin emulsifier with hydrophilic ends and lipophilic middle, which increased the surface chemical activity and roughness of the carbon fiber (CF). This improved the interfacial adhesion in CF/polyamide 6 (PA6) composites, resulting in higher tensile strength and impact strength.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Chemistry, Physical

Highly tough, degradable, and water-resistant bio-based supramolecular plastics comprised of cellulose and tannic acid

Haoxiang Sun et al.

Summary: In this study, high-performance degradable plastics with high mechanical strength, satisfactory water resistance, and rapid degradation characteristics were fabricated through the complexation of regenerated cellulose and tannic acid. The resulting plastic, called C-TA, exhibited ultrahigh fracture strength and toughness. Molecular dynamics simulations showed that the introduction of dendritic tannic acid molecules enhanced the toughness of the plastic. The C-TA plastic also displayed excellent water resistance and could be fully degraded in soil within 35 days.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Add to Collection

Article Chemistry, Applied

Polydopamine-treated hierarchical cellulosic fibers as versatile reinforcement of polybutylene succinate biocomposites for electromagnetic shielding

Gonghua Hong et al.

Summary: The study demonstrates the use of polymer and nanomaterial reinforced bio-based materials for high-performance electromagnetic shielding, which shows improved properties in terms of shielding effectiveness and mechanical strength.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Bioinspired polydopamine deposition and silane grafting modification of bamboo fiber for improved interface compatibility of poly (lactic acid) composites

Kaiqiang Zhang et al.

Summary: In this study, a bioinspired polydopamine (PDA) functional coating was constructed on the surface of bamboo fiber (BF) to introduce an epoxy-functionalized silane layer (KH560), resulting in improved mechanical properties and thermal stability of the composites. This approach provides a simple and eco-friendly method for enhancing interface adhesion strength and manufacturing high-performance composites.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Alternative modification by grafting in bamboo cellulose nanofibrils: A potential option to improve compatibility and tunable surface energy in bionanocomposites

C. A. Rodriguez-Ramirez et al.

Summary: A chemical modification method was developed to modify the surface of cellulose nanofibrils (CNFs) from an ordinary bamboo. The modified CNFs were used as nano-fillers to improve the properties of films based on polylactic acid (PLA). The study showed that the addition of 5% modified CNFs resulted in improved thermal, mechanical, and surface properties of the films.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Materials Science, Textiles

Olive Cellulosic Fibre Based Epoxy Composites: Thermal and Dynamic Mechanical Properties

M. Jawaid et al.

Summary: This study evaluates the impact of different olive tree residues on the thermal properties of olive/epoxy biocomposites. The results show that olive tree leaves as a filler improve the thermal and dynamic mechanical properties of the biocomposites. Meanwhile, olive tree small branch-filled biocomposites exhibit the highest storage modulus and lowest coefficient of thermal expansion.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Polymer Science

Compatibility and interphase properties of poly(butylene succinate-co-adipate) (PBSA)/Kraft lignin films assessed by nanomechanical analyses

Lais Taguchi Possari et al.

Summary: The combination of technical lignins and biodegradable polymers to create sustainable materials is a common method for maximizing the value of these biomacromolecules. In this study, PBSA and Kraft lignin films were prepared and their phase morphology, miscibility, compatibility, and interphase properties were analyzed using AFM-QNM. The results showed strong intermolecular interactions and partial miscibility between the components, with lignin particles uniformly dispersed and promoting stiffening in the PBSA phase. AFM-QNM measurements provided comprehensive qualitative and quantitative information about the morphology and nanomechanical properties of the films, allowing for a better understanding of the compatibility and miscibility of lignin/thermoplastic compounds compared to traditional characterization methods.

POLYMER (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Tannic acid: a crosslinker leading to versatile functional polymeric networks: a review

Chen Chen et al.

Summary: This article summarizes the common features and applications of tannic acid, introduces its use as a crosslinker in various fields, and presents future prospects for tannic acid crosslinked materials.

RSC ADVANCES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Nanomechanical and dynamic mechanical properties of rubber-wood-plastic composites

Yonghui Zhou et al.

Summary: This article presents the assessment of mechanical properties of rubber-wood-plastic composites (RubWPC) and their correlations. The results showed that the composites treated with multiple coupling agents exhibited superior interfacial bonding quality and nanomechanical property.

NANOTECHNOLOGY REVIEWS (2022)

Add to Collection

Article Engineering, Environmental

Thermoplastic Blends Based on Poly(Butylene Succinate-co-Adipate) and Different Collagen Hydrolysates from Tanning Industry: I-Processing and Thermo-mechanical Properties

Maurizia Seggiani et al.

Summary: Blends of PBSA with two different hydrolyzed collagens were investigated, showing that the HCs influenced the rheology, morphology, and mechanical properties of the blends. Alkaline hydrolyzed collagen acted as a plasticizer, while enzymatic hydrolyzed collagen behaved as an organic filler. The study concludes that both HCs can be used in the production of thermoplastic blends for agriculture and plant nurseries applications.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Add to Collection

Article Engineering, Chemical

Surface modification of reverse osmosis membrane with tannic acid for improving chlorine resistance

Wentao Yan et al.

Summary: This study successfully improved the chlorine resistance of RO membrane by modifying the membrane surface with tannic acid. The introduction of tannic acid not only enhanced membrane flux and maintained high rejection rate, but also showed robust resistance to chlorine after long-term exposure, providing a simple and effective method to improve the performance of RO membrane.

DESALINATION (2021)

Add to Collection

Article Environmental Sciences

Evaluating the Ready Biodegradability of Biodegradable Plastics

Ryosuke Nabeoka et al.

Summary: Reducing environmental burden and assessing plastic safety are global challenges. Limited standard test data on plastic biodegradability has prompted researchers to evaluate 8 biodegradable plastics using OECD test guidelines. Some plastics showed over 60% biodegradation by day 28, indicating ready biodegradability. Lowering test concentrations may improve biodegradation rates for certain plastics like PHB, PHBV, and PBS.

ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY (2021)

Add to Collection

Article Engineering, Environmental

Thermoplastic Blends Based on Poly(Butylene Succinate-co-Adipate) and Different Collagen Hydrolysates from Tanning Industry-II: Aerobic Biodegradation in Composting Medium

Roberto Altieri et al.

Summary: The study found that raw collagen hydrolysates from the tannery industry can be used in the production of PBSA-based thermoplastic blends, creating compostable items with organic nitrogen fertilizing properties. This approach not only reduces production costs, but also provides a sustainable solution for agriculture and plant nurseries.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Add to Collection

Article Engineering, Environmental

Functionalization and use of grape stalks as poly(butylene succinate) (PBS) reinforcing fillers

Alessandro Nanni et al.

Summary: The study evaluated the potential use of grape stalks as fillers in bio-composites, showing that the bio-composites were stiffer than the control polymer with a higher Young's modulus. This provides a potentially new method to recover raw materials by utilizing by-products of the wine industry like grape stalks.

WASTE MANAGEMENT (2021)

Add to Collection

Article Multidisciplinary Sciences

Convergent synthesis of diversified reversible network leads to liquid metal-containing conductive hydrogel adhesives

Yong Xu et al.

Summary: The authors propose a strategy of convergent synthesis to create biomimetic electroconductive liquid metal hydrogels. These hydrogels have self-healing and shear-thinning properties, allowing for 3D printing and minimally invasive injection for in vivo experiments. This approach combines materials of different natures to generate matrices with high adhesive strength, enhanced electroconductivity, good cytocompatibility in vitro, and high biocompatibility in vivo.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Environmental

Back to the Future: Decomposability of a Biobased and Biodegradable Plastic in Field Soil Environments and Its Microbiome under Ambient and Future Climates

Witoon Purahong et al.

Summary: The study explored the decomposition process and microbiome of a promising biodegradable plastic, PBSA, in soils under different climatic conditions. The results showed that PBSA experienced significant reduction in weight and molar mass under both climates, and its microbiome differed significantly from that of surrounding soils. The study highlighted the complex microbial decomposition process of PBSA in soil, involving interkingdom relationships between bacteria and fungi.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The influence of textile finishing agents on the biodegradability of shed fibres

Marianna Lykaki et al.

Summary: Studies have shown that natural and regenerated fibers have high biodegradability rates, while PET fibers are hardly degraded. Additionally, some finishing agents reduce the biodegradability of fibers, and the addition of antimicrobial agents significantly decreases the level of biodegradation.

GREEN CHEMISTRY (2021)

Add to Collection

Article Engineering, Environmental

Dynamic Mechanical Properties and Free Vibration Characteristics of Surface Modified Jute Fiber/Nano-Clay Reinforced Epoxy Composites

S. Ramakrishnan et al.

Summary: The study investigated the effects of NaOH solution concentration and nano-clay content on the properties of composite materials, revealing significant impacts on glass transition temperature and natural frequency. The addition of treated fibers and nano-clay improved the interfacial bonding, suggesting potential for low strength structural applications.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Tannic acid functionalization of bamboo micron fibes: Its capability to toughen epoxy based biocomposites

Ashangbam Satyavrata Singh et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Engineering, Environmental

Nature-inspired chemistry toward hierarchical superhydrophobic, antibacterial and biocompatible nanofibrous membranes for effective UV-shielding, self-cleaning and oil-water separation

Wenjing Ma et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Functionalization of wood fibers based on immobilization of tannic acid and in situ complexation of Fe (II) ions

Yuxiang Huang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Composites

Sustainable green composites from biodegradable plastics blend and natural fibre with balanced performance: Synergy of nano-structured blend and reactive extrusion

Feng Wu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Physical

Applications of tannic acid in membrane technologies: A review

Wentao Yan et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Reaching New Heights in Plastic Pollution-Preliminary Findings of Microplastics on Mount Everest

Imogen E. Napper et al.

ONE EARTH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Sustainable composites from poly(3-hydroxybutyrate) (PHB) bioplastic and agave natural fibre

Megan K. M. Smith et al.

GREEN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Preparation, Mechanical and Antimicrobial Properties of SiO2/Poly(butylene adipate-co-terephthalate) Films for Active Food Packaging

R. Venkatesan et al.

SILICON (2019)

Add to Collection

Article Thermodynamics

TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE)

Xingping Kai et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Materials Science, Paper & Wood

Compatibility of Kraft Lignin, Organosolv Lignin and Lignosulfonate With PLA in 3D Printing

Vebi Mimini et al.

JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Composites

Dynamic and thermo-mechanical properties of hybridized kenaf/PALF reinforced phenolic composites

Mohammad Asim et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Polymer Science

Renewable and flexible UV-blocking film from poly(butylene succinate) and lignin

Yan Zhang et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Article Materials Science, Composites

Regulating tannic acid-crosslinked epoxidized soybean oil oligomers for strengthening and toughening bamboo fibers-reinforced poly(lactic acid) biocomposites

Wendi Liu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

A comparative study of degradation mechanisms of PHBV and PBSA under laboratory-scale composting conditions

Melanie Salomez et al.

POLYMER DEGRADATION AND STABILITY (2019)

Add to Collection

Article Chemistry, Physical

Metal-Phenolic Network-Based Nanocomplexes that Evoke Ferroptosis by Apoptosis: Promoted Nuclear Drug Influx and Reversed Drug Resistance of Cancer

Yuxin Guo et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Iron Gall Ink Revisited: In Situ Oxidation of Fe(II)-Tannin Complex for Fluidic-Interface Engineering

Hojae Lee et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Polymer Science

ZnO/PBAT nanocomposite films: Investigation on the mechanical and biological activity for food packaging

Raja Venkatesan et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2017)

Add to Collection

Article Chemistry, Analytical

Staged thermal fractionation for segregation of lignin and cellulose pyrolysis products: An experimental study of residence time and temperature effects

Christopher L. Waters et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

Add to Collection

Article Polymer Science

Biobased epoxy/carbon fiber composites: Effect on mechanical, thermo-mechanical and morphological properties

G. S. Sudha et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2017)

Add to Collection

Article Polymer Science

Chemical modification and plasma-induced grafting of pyrolitic lignin. Evaluation of the reinforcing effect on lignin/poly(L-lactide) composites

Teo Atz Dick et al.

POLYMER (2017)

Add to Collection

Article Polymer Science

TiO2 nanoparticles/poly(butylene adipate-co-terephthalate) bionanocomposite films for packaging applications

Raja Venkatesan et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Plant fibre based bio-composites: Sustainable and renewable green materials

M. Ramesh et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Rust-Mediated Continuous Assembly of Metal-Phenolic Networks

Md. Arifur Rahim et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Applied

The effect of starch amylose content on the morphology and properties of melt-processed butyl-etherified starch/poly[(butylene succinate)-co-adipate] blends

Lesego Maubane et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Review Engineering, Manufacturing

Review of the recent developments in cellulose nanocomposite processing

Kristiina Oksman et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Review Polymer Science

Poly(butylene succinate)-based polyesters for biomedical applications: A review

Matteo Gigli et al.

EUROPEAN POLYMER JOURNAL (2016)

Add to Collection

Article Engineering, Multidisciplinary

Comparison of the thermal, dynamic mechanical and morphological properties of PLA-Lignin & PLA-Tannin particulate green composites

Muhammad A. S. Anwer et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Engineering, Multidisciplinary

Damping in composite materials: Properties and models

A. Treviso et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Unraveling the mechanism of thermal and thermo-oxidative degradation of tannic acid

Zhiyu Xia et al.

THERMOCHIMICA ACTA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Morphology, mechanical properties, and dimensional stability of wood particle/high density polyethylene composites: Effect of removal of wood cell wall composition

Rongxian Ou et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Chemistry, Applied

Plasticized-starch/poly(ethylene oxide) blends prepared by extrusion

Fang Yu et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Materials Science, Characterization & Testing

Biodegradation study of plasticised corn flour/poly(butylene succinate-co-butylene adipate) blends

Fouzia Jbilou et al.

POLYMER TESTING (2013)

Add to Collection

Article Chemistry, Physical

Theoretical and spectroscopic investigations of a complex of Al(III) with caffeic acid

JP Cornard et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.