☆ 4.6 Article

Mechanical, thermal, rheological, and morphological characterization of polyolefin/activated attapulgite nanocomposites

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Thermal and mechanical properties of biodegradable nanocomposites prepared by poly(lactic acid)/acetyl tributyl citrate reinforced with attapulgite

Ya-Li Sun et al.

Summary: Attapulgite (ATT) is a versatile nanomaterial that enhances the barrier performance of polylactic acid (PLA) as a reinforcing filler. Acetyl tributyl citrate (ATBC) was used to improve the toughness of PLA and facilitate the dispersion of ATT in PLA. The addition of a small amount of ATBC improved the fracture elongation, crystallinity, water absorption, hydrolysis, and biodegradability of PLA. When 10% ATT was added to PLA/ATBC sample, the tensile strength and thermal degradation temperature significantly increased. However, an excessive amount of ATT caused agglomeration and reduced the performance of the nano composite.

JOURNAL OF POLYMER RESEARCH (2023)

Add to Collection

Article Materials Science, Paper & Wood

Development of new biodegradable composites materials from polycaprolactone and wood flour

Sheila Cristina Cintra et al.

Summary: This study aimed to develop environmentally friendly composites based on polycaprolactone (PCL) reinforced with different contents of wood flour (WF). The addition of WF contributed to the degradation by hydrolysis and improved the mechanical properties of the composite. The PCL/5 wt% WF composite showed the best performance with good interaction with the PCL matrix.

WOOD MATERIAL SCIENCE & ENGINEERING (2022)

Add to Collection

Article Polymer Science

High-density polyethylene/attapulgite (ATP) nanocomposites: Effect of the organophilization of ATP on the structural, mechanical, and thermal properties

Thais Ferreira da Silva et al.

Summary: Organic-inorganic nanocomposites have attracted great interest due to the improvement in mechanical properties, and the surface modification of attapulgite (ATP) has been found to enhance the dispersion of ATP in high-density polyethylene (HDPE) matrix, resulting in improved mechanical and thermal properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Polymer Science

Influence of surface modification of attapulgite (ATP) with aminosilane (3-aminopropyl) triethoxysilane for the preparation of LLDPE/ATP nanocomposites

Thais Ferreira da Silva et al.

Summary: This study focuses on the surface modification of Attapulgite (ATP) to improve its interaction with linear low-density polyethylene (LLDPE) and prepare LLDPE/ATP nanocomposites. The results show that the modified ATP can enhance the mechanical properties and dispersion of the nanoclay in the polymer matrix, as confirmed by scanning electron microscopy, mechanical tests, and X-ray diffraction analysis.

JOURNAL OF POLYMER RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Cellulose acetate based sustainable nanostructured membranes for environmental remediation

Ayesha Rehman et al.

Summary: Membrane-based gas separation has the potential to reduce environmentally hazardous carbon dioxide (CO2) gas. This study focuses on synthesizing mixed matrix membranes (MMMs) with improved CO2 adsorption performance and stability. The incorporation of Cu-MOF-GO composite filler into the polymer matrix enhances the properties of the membranes. Increasing the filler concentration affects the CO2 adsorption. The successful incorporation of MOF within the MMMs was confirmed through various analytical techniques.

CHEMOSPHERE (2022)

Add to Collection

Article Environmental Sciences

Polyvinyl alcohol and aminated cellulose nanocrystal membranes with improved interfacial compatibility for environmental applications

Saleem Ahmad et al.

Summary: A novel aminated cellulose nanocrystal/polyvinyl alcohol nanocomposite membrane was developed for biogas upgrading. By adding Am-CNC, the membrane thickness increased, moisture uptake decreased, and CO2 permeance and selectivity were improved.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Pharmacology & Pharmacy

Fibrous Clays in Dermopharmaceutical and Cosmetic Applications: Traditional and Emerging Perspectives

Lihua Cao et al.

Summary: Functionalization of natural clay minerals for high value-added pharmaceutical and cosmetic applications is receiving global research attention. Fibrous clays have unique structural characteristics and are widely used in the dermopharmaceutical and cosmetic fields to develop novel skin delivery systems for enhanced health effects. This review summarizes the applications, structural characteristics, and mechanisms of fibrous clays in therapeutic and cosmetic fields.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

Add to Collection

Article Environmental Sciences

Cellulose acetate based sustainable nanostructured membranes for environmental remediation

Ayesha Rehman et al.

Summary: Membrane-based gas separation has the potential to reduce environmentally hazardous CO2 gas. This study aimed to synthesize mixed matrix membranes (MMMs) with improved CO2 adsorption performance and stability. The effect of increasing filler concentration on CO2 adsorption was investigated. The results showed that increasing the filler concentration improved the adsorption performance, but beyond a certain concentration, aggregation occurred. The successful incorporation of MOF within the MMMs was confirmed through spectroscopy analysis.

CHEMOSPHERE (2022)

Add to Collection

Article

Purification of raw palygorskite: a comparative study involving different processes and dispersing agents

G. P. M. de Souza et al.

Ceramica (2021)

Add to Collection

Review Mechanics

Polymer composite materials: A comprehensive review

Rachid Hsissou et al.

Summary: In this review, advanced composite materials based on thermoplastic polymers, elastomer polymers, and thermosetting polymers were comprehensively developed and investigated, with a focus on the synthesis of various macromolecular matrices. These composite materials exhibited excellent mechanical performances, high thermal resistance, good fire behavior, high impact resistance, best abrasion resistance, exceptional electric insulation, and good rigidity, making them a promising material for various applications. Additionally, detailed examination and discussion of composite materials formulation were provided in this review.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Environmental

Mimic Enzyme Based Cellulose Nanocrystals/PVA Nanocomposite Membranes for Enrichment of Biogas as a Natural Gas Substitute

Zaib Jahan et al.

Summary: The addition of mimic enzyme has been found to enhance the separation performance of nanocomposite membranes, with optimal results achieved at 5 mu mol/g addition at pH 10. In addition, the presence of moisture content affects the activity of the mimic enzyme.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Add to Collection

Article Materials Science, Biomaterials

Nano architectured cues as sustainable membranes for ultrafiltration in blood hemodialysis

Muhammad Ali et al.

Summary: The research aimed to reduce the adsorption of protein-bound and uremic toxins using mordenite zeolite as an adsorbent and different pore generating agents. The experiments showed that the concentration of mordenite zeolite affects membrane performance, with larger pore size leading to decreased solute rejection but increased creatinine uptake level.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Polymer Science

Metal Organic Frameworks Derived Sustainable Polyvinyl Alcohol/Starch Nanocomposite Films as Robust Materials for Packaging Applications

Naveed Ahmed Khan et al.

Summary: Bio-nanocomposites-based packaging materials are important for packaged food applications. This research focuses on creating biodegradable packaging films using polyvinyl alcohol, starch, and metal-organic frameworks to enhance thermal stability and mechanical strength. The addition of ZIF-67 nanoparticles affects the thermal stability and crystallinity of the membranes, with pyrolyzed ZIF-67 improving strength due to increased surface area.

POLYMERS (2021)

Add to Collection

Article Chemistry, Physical

Effect of Crystallinity of Polyethylene with Different Densities on Breakdown Strength and Conductance Property

Dawei Li et al.

MATERIALS (2019)

Add to Collection

Article Thermodynamics

Effect of graphene nanoplatelets diameter on non-isothermal crystallization kinetics and melting behavior of high density polyethylene nanocomposites

E. Tarani et al.

THERMOCHIMICA ACTA (2016)

Add to Collection

Article Polymer Science

Thermal degradation of high-density polyethylene/soya spent powder blends

Sam Sung Ting et al.

JOURNAL OF POLYMER ENGINEERING (2015)

Add to Collection

Article Polymer Science

Thermal stability of polypropylene-montmorillonite clay nanocomposites: Limitation of the thermogravimetric analysis

Lays B. Fitaroni et al.

POLYMER DEGRADATION AND STABILITY (2015)

Add to Collection

Article Engineering, Manufacturing

Effect of shearing on the orientation, crystallization and mechanical properties of HDPE/attapulgite nanocomposites

Jian Gao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

Add to Collection

Proceedings Paper Polymer Science

Development of Natural Rubber-Fibrous Nano Clay Attapulgite Composites: The Effect of Chemical Treatment of Filler on Mechanical and Dynamic Mechanical Properties of Composites

J. P. Rath et al.

INTERNATIONAL CONFERENCE ON INNOVATION IN POLYMER SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Morphology and Thermal Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Attapulgite Nanocomposites

Rossana Mara da Silva Moreira Thire et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2011)

Add to Collection

Article Polymer Science

Development of Nanocomposites from Blends with PA6 Matrix

Pankaj Agrawal et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2011)

Add to Collection

Article Polymer Science

The Use of an Organoclay on the Compatibilization of PP/EPDM Blends

Kaline R. M. Ferreira et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2011)

Add to Collection

Article Engineering, Chemical

Rheology and processing of polymer nanocomposites

Ramanan Krishnamoorti et al.

REVIEWS IN CHEMICAL ENGINEERING (2010)

Add to Collection

Review Polymer Science

Biodegradable polymers as biomaterials

Lakshmi S. Nair et al.

PROGRESS IN POLYMER SCIENCE (2007)

Add to Collection

Article Engineering, Environmental

Removal of methylene blue from aqueous solution by fibrous clay minerals

M. Hajjaji et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Add to Collection

Article Materials Science, Characterization & Testing

A study on attapulgite reinforced PA6 composites

Bingli Pan et al.

POLYMER TESTING (2006)

Add to Collection

Article Polymer Science

Study on the nonisothermal crystallization behavior of poly(vinyl alcohol)/attapulgite nanocomposites by DSC analysis

ZQ Peng et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)

Add to Collection

Article Polymer Science

Rheological characterization of poly styrene-clay nanocomposites to compare the degree of exfoliation and dispersion

J Zhao et al.

POLYMER (2005)

Add to Collection

Article Materials Science, Multidisciplinary

An investigation of friction and wear behaviors of polyimide/attapulgite hybrid materials

SQ Lai et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.