Effect of surface defects on damage and failure of dynamically driven cylindrical shells

In this work, expanding cylinder experiments are performed using a gas gun on the aluminum 6061 alloy to understand the dynamic deformation and failure behavior of this material in the presence of surface defects in the form of scratches. The experiments are then modeled with the modified Tepla (for tensile plasticity) model, which is equipped with the damage yield function of Gurson [Continuum theory of ductile rupture by void nucleation and growth: Part I-Yield criteria and flow rules for porous ductile media, (1977)] and Tvergaard and Needleman [Acta Metall. 32(1), 157-169 (1984)], over-stress viscosity [F. Addessio and J. Johnson, J. Appl. Phys. 74(3), 1640-1648 (1993)], and the underlying viscoplastic model of Preston et al. [J. Appl. Phys. 93(1), 211-220 (2003)] (Preston-Tonks-Wallace model) for the dense material. The Tepla model parameters were calibrated using the Bayesian approach against experimentally measured free-surface velocity data obtained from plate impact experiments on the aluminum 6061 alloy. The evolution of radial expansion and shapes of the deformed cylinder from the simulations on a pristine cylinder wall and a cylinder wall with a longitudinal surface defect shows excellent agreement with the corresponding experimental results. Finally, the role of surface defect size and cylinder wall geometry on the dynamic strength of the cylinder wall was also investigated through a series of simulations.

Automated summary

In this work, expanding cylinder experiments are conducted to investigate the dynamic deformation and failure behavior of aluminum 6061 alloy with surface defects. The experiments are then modeled using the modified Tepla model, and the model parameters are calibrated using the Bayesian approach. The simulations show excellent agreement with experimental results, and the influence of surface defect size and cylinder wall geometry on the dynamic strength of the cylinder wall is also studied.