Related references
Note: Only part of the references are listed.Annealed microstructure dependent corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy
Baoxian Su et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Influence of Cr addition on microstructure evolution and corrosion behavior of the Ti-Zr alloys
Chaoqun Xia et al.
MATERIALS CHARACTERIZATION (2021)
A kink-bands reinforced titanium alloy showing 1.3 Gpa compressive yield strenght: Towards extra high-strength/strain-transformation Ti alloys
Jinyong Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Cytocompatibility of Ti-xZr alloys as dental implant materials
Pinghua Ou et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2021)
Direct Laser Deposition-Additive Manufacturing of Ti-15Mo Alloy: Effect of Build Orientation Induced Surface Topography on Corrosion and Bioactivity
Tarun Bhardwaj et al.
METALS AND MATERIALS INTERNATIONAL (2020)
Thermomechanical treatments influence on the phase composition, microstructure, and selected mechanical properties of Ti-20Zr-Mo alloys system for biomedical applications
P. A. B. Kuroda et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation films
P. F. Ji et al.
CORROSION SCIENCE (2020)
Controlling the corrosion behavior of Ti-Zr alloy by tuning the α/β phase volume fraction and morphology of β phase
P. F. Ji et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Mechanical properties and corrosion behavior of β-type Ti-Zr-Nb-Mo alloys for biomedical application
Pengfei Chui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Strong and ductile beta Ti-18Zr-13Mo alloy with multimodal twinning
Jinyong Zhang et al.
MATERIALS RESEARCH LETTERS (2019)
Optimization of annealing treatment and comprehensive properties of Cu-containing Ti6Al4V-xCu alloys
Cong Peng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effects of Mo contents on the microstructure, properties and cytocompatibility of the microwave sintered porous Ti-Mo alloys
J. L. Xu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Microstructure, mechanical properties and corrosion behaviors of biomedical Ti-Zr-Mo-xMn alloys for dental application
Hui Liu et al.
CORROSION SCIENCE (2019)
Strengthening strain-transformable β Ti-alloy via multi-phase nanostructuration
J. Y. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of texture and transformation strain on the superelastic performance of a new Ti-20Zr-3Mo-3Sn alloy
J. J. Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Evaluation of corrosion resistance of implant-use Ti-Zr binary alloys with a range of compositions
Teisuke Akimoto et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Development of Ti-15Zr-Mo alloys for applying as implantable biomedical devices
D. R. N. Correa et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Fabrication and characterization of a novel beta metastable Ti-Mo-Zr alloy with large ductility and improved yield strength
JinYong Zhang et al.
MATERIALS CHARACTERIZATION (2018)
Mechanical properties, in vitro corrosion resistance and biocompatibility of metal injection molded Ti-12Mo alloy for dental applications
W. Xu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Microstructural evolution of a ductile metastable β titanium alloy with combined TRIP/TWIP effects
J. Y. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The effects of α and ω phases on the superelasticity and shape memory effect of binary Ti-Mo alloys
C. H. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure and Mechanical Properties of Ti-Mo-Zr-Cr Biomedical Alloys by Powder Metallurgy
Abou Bakr Elshalakany et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Extraordinary high strength Ti-Zr-Ta alloys through nanoscaled, dual-cubic spinodal reinforcement
Arne Biesiekierski et al.
ACTA BIOMATERIALIA (2017)
Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V-xZr alloys
Chaoqun Xia et al.
CORROSION SCIENCE (2016)
Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
Nianwei Dai et al.
CORROSION SCIENCE (2016)
New insights into the cathodic dissolution of aluminium using electrochemical methods
T. T. M. Tran et al.
ELECTROCHIMICA ACTA (2016)
Effect of molybdenum on structure, microstructure and mechanical properties of biomedical Ti-20Zr-Mo alloys
Pedro Akira Bazaglia Kuroda et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A new titanium alloy with a combination of high strength, high strain hardening and improved ductility
F. Sun et al.
SCRIPTA MATERIALIA (2015)
Microstructures and Electrochemical Behavior of Ti-Mo Alloys for Biomaterials
Back-Sub Sung et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)
Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit
M. Yan et al.
ACTA BIOMATERIALIA (2014)
Effect of molybdenum on the microstructure, mechanical properties and corrosion behavior of Ti alloys
Eung-Beom Lee et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2014)
Novel β-type Zr-Mo-Ti alloys for biological hard tissue replacements
Li Nie et al.
MATERIALS & DESIGN (2014)
The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti-Zr system alloys for dental applications
D. R. N. Correa et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
New Developments of Ti-Based Alloys for Biomedical Applications
Yuhua Li et al.
MATERIALS (2014)
Effects of molybdenum content on the structure and mechanical properties of as-cast Ti-10Zr-based alloys for biomedical applications
Wen-Fu Ho et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
The bone tissue compatibility of a new Ti-Nb-Sn alloy with a low Young's modulus
Keiki Miura et al.
ACTA BIOMATERIALIA (2011)
Mechanical and electrochemical characterization of Ti-12Mo-5Zr alloy for biomedical application
Changli Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Development of high Zr-containing Ti-based alloys with low Young's modulus for use in removable implants
Xiaoli Zhao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Cytotoxicity of Titanium and Titanium Alloying Elements
Y. Li et al.
JOURNAL OF DENTAL RESEARCH (2010)
The structure and mechanical properties of as-cast Zr-Ti alloys
Hsueh-Chuan Hsu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Electrochemical corrosion behavior of biomedical Ti-22Nb and Ti-22Nb-6Zr alloys in saline medium
B. L. Wang et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2009)
Structure, mechanical properties and grindability of dental Ti-10Zr-X alloys
Wen-Fu Ho et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Effects of Zr content on microstructure and corrosion resistance of Ti-30Nb-Zr casting alloys for biomedical applications
Danielle Q. Martins et al.
ELECTROCHIMICA ACTA (2008)
A comparison of tensile properties and corrosion behavior of cast Ti-7.5Mo with c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys
Wen-Fu Ho
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Corrosion behavior of Ti-xNb-13Zr alloys in Ringer's solution
A. Robin et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2008)
Mechanical properties of fully porous and porous-surfaced Ti-6Al-4V implants fabricated by electro-discharge-sintering
Y. J. Jo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
The roles of macro segregation and of dendritic array spacings on the electrochemical behavior of an Al-4.5 wt.% Cu alloy
W. R. Osorio et al.
ELECTROCHIMICA ACTA (2007)
Corrosion behaviour of Ti-6Al-7Nb and Ti-6Al-4V ELI alloys in the simulated body fluid solution by electrochemical impedance spectroscopy
S. Tamilselvi et al.
ELECTROCHIMICA ACTA (2006)
Effect of dendritic arm spacing on mechanical properties and corrosion resistance of Al 9 Wt Pct Si and Zn 27 Wt Pct Al alloys
Wislei R. Osorio et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Ti alloy design strategy for biomedical applications
G He et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Electrochemical studies on zirconium and its biocompatible alloys Ti-50Zr at.% and Zr-2.5Nb wt.% in simulated physiologic media
NTC Oliveira et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2005)
Properties of passive film formed on CP titanium, Ti-6Al-4V and Ti-13.4Al-29Nb alloys in simulated human body conditions
AK Shukla et al.
INTERMETALLICS (2005)
Microstructural evolution and strengthening mechanisms in Ti-Nb-Zr-Ta, Ti-Mo-Zr-Fe and Ti-15Mo biocompatible alloys
S Nag et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2005)
Shape memory properties of biomedical Ti-Mo-Ag and Ti-Mo-Sn alloys
T Maeshima et al.
MATERIALS TRANSACTIONS (2004)
Mechanical properties and shape memory behavior of Ti-Mo-Ga alloys
HY Kim et al.
MATERIALS TRANSACTIONS (2004)
Development of a β-type Ti-12Mo-5Ta alloy for biomedical applications:: cytocompatibility and metallurgical aspects
DM Gordin et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)
Study of passivation of Al and Al-Sn alloys in borate buffer solutions using electrochemical impedance spectroscopy
S Gudic et al.
ELECTROCHIMICA ACTA (2002)
Concentration- and composition-dependent effects of metal ions on human MG-63 osteoblasts
NJ Hallab et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Electrochemical characterisation of passive films on Ti alloys under simulated biological conditions
AWE Hodgson et al.
ELECTROCHIMICA ACTA (2002)
Deformation induced martensite and superelasticity in a β-metastable titanium alloy
T Grosdidier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
