☆ 4.7 Article

Significantly improved ablation properties under high heat flux environment based on carbon fiber reinforced Zr-doped silicone rubber

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

A novel B-Si-Zr hybridized ceramizable phenolic resin and the thermal insulation properties of its fiber-reinforced composites

Yi Xin et al.

Summary: A novel B-Si-Zr hybridized ceramicizable resin(BSZ-PR) was successfully fabricated by chemical reaction of boric acid, zirconium hydroxyl-containing polyhedral oligomeric silsesquioxane(Zr-POSS) and phenolic. The incorporation of boric acid and Zr-POSS improved the thermal stability of the resin effectively, and the flexural strength of carbon fiber/BSZ-PR and high silica fiber/BSZ-PR composites were increased significantly. Formation of ceramic structures such as SiO2, ZrO2 and SiC at high temperatures and extreme ablative conditions from BSZ-PR and its composites may be the key to the improved thermal, ablative properties.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Polymer Science

Enhanced flexibility and ablative performance of silicone rubber by constructing an interpenetrating zirconium-containing polysiloxane double network

Jinfeng Tian et al.

Summary: In order to achieve uniform distribution of heteroatoms in silicone rubber and improve flexibility and ablation resistance, polydimethylsiloxane with an interpenetrating zirconium-containing double-network (Zr-PDMS) was prepared. Zr-PDMS showed significantly enhanced flexibility with increased tensile strength and elongation-at-break. It also exhibited excellent anti-ablation performance with decreased mass ablation rate and charring rate, forming stable and coherent charred layers after ablation tests.

POLYMER (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance

Youquan Ling et al.

Summary: The study demonstrates that silicone-grafted epoxy/CF composites have the potential to enhance mechanical properties and ablation resistance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Polymer Science

Understanding the Role of Carbon Fiber Skeletons in Silicone Rubber-Based Ablative Composites

Yuan Ji et al.

Summary: This study explores the effect of carbon fiber length on the microstructure and ablation properties of silicone rubber-based ablative composites. It was found that carbon fibers longer than 3 mm can form a complete and continuous skeleton in the ceramic layer, leading to a decrease in ablation rate and back-face temperature.

POLYMERS (2022)

Add to Collection

Article Materials Science, Composites

Synergetic effects of Kevlar fibers and polyimide powder fillers on performances of Poly(diaryloxyphosphazene) based elastomeric heat shielding materials

Jian Wu et al.

Summary: This study investigated the construction of dense and intact charred layers by combining KF and PIP into PDPP based EHSMs formulations, showing significant improvements in tensile strength and ablation properties with the addition of PIP. Furthermore, micro-CT was used for the first time to characterize the morphology of charred layers in ablative composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Effect of Mesophase Pitch Incorporation on the Ablation Behavior and Mechanism of Phenolic Composites

Yisen Huang et al.

Summary: In this study, boron-phenolic resin (BPR) composites were modified with various loadings of mesophase pitch (MP) to improve their mechanical performance, ablation resistance, and thermal insulation properties. The introduction of MP effectively prevented the growth of microcracks and increased the proportion of micropores and graphitic structures in the residual char, resulting in improved ablation and insulation properties of the composites.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Materials Science, Ceramics

Molecular design for thermally stable SiZrBOC structure from single source precursor with high ceramic yield

Wanying Zhang et al.

Summary: SiZrBOC ceramics prepared by sol-gel method exhibit excellent high-temperature resistance and oxidation resistance, with the addition of boron elements promoting the formation of Si-O-B bonds in the ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Engineering, Chemical

Shear Ablation Behavior and Mechanism of Liquid Silicone Rubber Composites at Different Ablation Angles and Distances

Liwei Yan et al.

Summary: The study examined the shear ablation behavior of liquid silicone rubber composites (LSRCs) using an oxyacetylene flame at different ablation angles and distances. Computational fluid dynamic simulations showed that ablation morphology varied significantly with angles, and shear ablation resulted in augmented ablation rates and asymmetric ablation craters. The acceleration was mainly attributed to powerful mechanical denudation induced by intense gas flow, disrupting continuity of the molten liquid layer and leading to quicker elimination of ablated boundary.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Materials Science, Ceramics

Polymer derived ZrO2 reinforced SiC-ZrB2 polycrystalline fiber

Peng Zhang et al.

Summary: In this study, a ZrO2 reinforced SiC-ZrB2 polycrystalline fiber was successfully prepared at a low temperature using the polymer-derived ceramic method. The formation of t-ZrO2 at relatively low temperature and the generation of high-quality fiber products after heat treatment were the most interesting findings. This study provides a novel method for the fabrication of SiC-based polycrystalline fiber at a low temperature.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Composites

Ablation resistance of resin matrix composites modified with different MAX-phase materials

Chen Ma et al.

Summary: In this study, carbon-phenolic composites modified with Ti3SiC2 and Ti3AlC2 were prepared, and their ablation behavior was investigated. The addition of Ti3AlC2 particles significantly reduced the linear ablation rate and formed a protective coating during ablation. Ti3AlC2 showed better modification effect than Ti3SiC2, and increasing the volume ratio of resin and Ti3AlC2 particles further enhanced the ablation resistance.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Composites

Thermal insulation and char layer mechanical properties of a novel ethylene propylene diene monomer composite reinforced with carbon nanotubes coated via chemical vapour deposition

Kun Xi et al.

Summary: This study proposes a solution to the reduced thermal insulation performance caused by carbon nanotubes (CNTs) in composite insulation materials, by pre-coating the CNTs with a carbon layer. The experimental results show that the coated-CNTs formulation significantly reduces thermal conductivity and improves the char layer strength of the insulation material. Overall, the coated-CNTs not only enhance the thermal insulation performance by reducing thermal conductivity, but also improve particle erosion resistance by strengthening the char layer.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of zirconium source and content on zirconia crystal form, microstructure and mechanical properties of ZTM ceramics

Wei Lian et al.

Summary: ZTM ceramics were successfully produced from coal gangue, with ZrOCl2.8H2O as the zirconium source showing the highest density and unique toughening mechanisms. The flexural strength and fracture toughness of the ceramics were significantly improved compared to traditional methods, making it a promising reference for high-value ceramic fabrication from coal gangue.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Environmental

Multi-phase SiZrOC nanofibers with outstanding flexibility and stability for thermal insulation up to 1400 ° C

Xiaoshan Zhang et al.

Summary: The study introduced multi-phase SiZrOC nanofibers with significantly low thermal conductivity, high flexibility, good mechanical strength, and excellent fire resistance, allowing for excellent thermal stability up to 1400 degrees Celsius. This material presents a novel strategy for the development of a wider range of high-temperature thermal insulating materials.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Composites

Effects of carbon nanotubes on char structure and heat transfer in ethylene propylene diene monomer composites at high temperature

MengFei Guo et al.

Summary: Carbon nanotubes can reduce the thermal conductivity and ablation rate of the char layer in EPDM composites at high temperatures by promoting vapor deposition of pyrolysis gases and forming a layer of pyrolytic carbon on their surface, leading to denser char layer structure.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of carbon preform density on the microstructure and ablation resistance of CLVD-C/C-ZrC-SiC composites

Qinchuan He et al.

Summary: The study focused on the effects of preform density on the microstructure and ablation behavior of CLVD-C/C-ZrC-SiC composites. Results showed that composites prepared from preforms with a density of 0.91 g/cm(3) exhibited dense microstructure and proper ceramic content, leading to excellent ablation resistance attributed to the formation of a uniform and continuous protective layer of ZrO2-SiO2.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ordered graphitized ceramic layer induced by liquid crystal epoxy resin in silicone rubber composites with enhanced ablation resistance performance

Zhuodong Liu et al.

Summary: A series of BER-modified silicone rubber composites were prepared in this study, aiming to improve the order of graphite carbon in the ceramic layers of composites by introducing SiO2 nanoparticles and carbon fibers as ablation fillers, resulting in the formation of strong ceramic layers and exhibiting excellent ablation resistance performance, especially in the 20BER composite.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Polymer Science

Remarkable improvement of organic-to-inorganic conversion of silicone rubber at elevated temperature through platinum-nitrogen catalytic system

Tian Liu et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Polymer Science

Effects of Zirconium Silicide on the Vulcanization, Mechanical and Ablation Resistance Properties of Ceramifiable Silicone Rubber Composites

Jiuqiang Song et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Promoted ablation resistance of polydimethylsiloxane via crosslinking with multi-ethoxy POSS

Haodong Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Polymer Science

Efficient organic-to-inorganic conversion of polysiloxane by novel platinum-thiol catalytic system

Tian Liu et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Chemistry, Physical

Effect of the constituent networks of double-network gels on their mechanical properties and energy dissipation process

Tasuku Nakajima et al.

SOFT MATTER (2020)

Add to Collection

Review Engineering, Chemical

Advances in Ablative Composites of Carbon Based Materials: A Review

Colonel Vijay Kumar et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Review Polymer Science

Recent developments in elastomeric heat shielding materials for solid rocket motor casing application for future perspective

Kesiya George et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

Add to Collection

Article Thermodynamics

Preparation and properties of ceramifiable flame-retarded silicone rubber composites

Feipeng Lou et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Article Polymer Science

Microstructure and ablation behavior of an affordable and reliable nanostructured Phenolic Impregnated Carbon Ablator (PICA)

Maurizio Natali et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection

Article Polymer Science

Thermal protection characteristics of polydimethylsiloxane-organoclay nanocomposite

Ancy Smitha Alex et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection

Article Materials Science, Composites

Ablative properties and mechanisms of hot vulcanised silicone rubber (HVSR) composites containing different fillers

Y. Liu et al.

PLASTICS RUBBER AND COMPOSITES (2016)

Add to Collection

Article Polymer Science

The effects of phosphorus-based flame retardants and octaphenyl polyhedral oligomeric silsesquioxane on the ablative and flame-retardation properties of room temperature vulcanized silicone rubber insulating composites

Yang Zhang et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review

Maurizio Natali et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Improved Ablation Resistance of Silicone Rubber Composites by Introducing Montmorillonite and Silicon Carbide Whisker

Guangwu Zhang et al.

MATERIALS (2016)

Add to Collection

Article Polymer Science

Chemisorption and thermally induced transformations of polydimethylsiloxane on the surface of nanoscale silica and ceria/silica

Kostiantyn Kulyk et al.

POLYMER DEGRADATION AND STABILITY (2015)

Add to Collection

Article Polymer Science

Ablation and thermo-mechanical investigation of short carbon fiber impregnated elastomeric ablatives for ultrahigh temperature applications

M. Bassyouni et al.

POLYMER DEGRADATION AND STABILITY (2014)

Add to Collection

Article Materials Science, Ceramics

Ceramization and oxidation behaviors of silicone rubber ablative composite under oxyacetylene flame

Dong Yang et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Materials Science, Ceramics

Microstructure characterization of in situ synthesized porous Si2N2O ceramics using spodumene additive

Xue Dong et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Engineering, Manufacturing

Ablation performance and characterization of thermoplastic polyurethane elastomer nanocomposites

Eric K. Allcorn et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

Add to Collection

Article Engineering, Manufacturing

Silicone rubber ablative composites improved with zirconium carbide or zirconia

Dong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

Add to Collection

Article Polymer Science

Significantly improving the thermal stability and dispersion morphology of polyhedral oligomeric silsesquioxane/polysiloxane composites by in-situ grafting reaction

Yang Meng et al.

POLYMER (2013)

Add to Collection

Article Materials Science, Ceramics

Initial sintering stage pore growth mechanism applied to the manufacture of ceramic membrane supports

C Falamaki et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.