☆ 4.7 Article

Enhanced electrochemical performance of LiNiO2 cathode material by precursor preoxidation for lithium-ion batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Surface Stabilization of Cobalt-Free LiNiO2 with Niobium for Lithium-Ion Batteries

Seamus Ober et al.

Summary: This study demonstrates that incorporating a small amount of niobium effectively suppresses the structural and surface degradation of lithium nickel oxide, resulting in higher capacity retention during cycling. The niobium treatment forms a surface coating of LixNbOy phase, reducing active material loss over long-term cycling and improving lithium-ion diffusion kinetics. The enhanced structural integrity and electrochemical performance of the niobium-treated lithium nickel oxide are due to the reduction in the formation of nanopore defects during cycling compared to untreated lithium nickel oxide.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Chemistry, Physical

Low-Temperature Ion Exchange Synthesis of Layered LiNiO2 Single Crystals with High Ordering

Leonhard Karger et al.

Summary: A two-step synthesis approach has been developed to avoid the formation of nickel substitutional defects and produce Ni-free LiNiO2 particles at relatively low temperatures.

CHEMISTRY OF MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Structural, electrochemical, and Li-ion diffusion properties of Mg&Mn dual doped LiNiO2 cathode materials for Li-ion batteries

Tian Rao et al.

Summary: The dual-doped LNO cathode material with magnesium and manganese exhibits higher capacity retention, more stable charge transfer impedance, and Li+ diffusion coefficient, improving its structural stability and cycling performance compared to the bare LNO counterpart.

SOLID STATE IONICS (2022)

Add to Collection

Article Electrochemistry

Synthesis and characterization of Nickel-rich layered LiNi1-xMnxO2 (x=0.02,0.05) cathodes for lithium-ion batteries

Yasong Wang et al.

Summary: LiNi0.95Mn0.05O2 binary material with a better layered structure and lower Li-Ni mixing ratio demonstrates excellent electrochemical performance compared to LiNiO2. The stability of Mn4+ and the presence of stable layered structure and lithium-ion diffusion channel contribute to its superior lithium-ion conductivity and structural integrity.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Physical

Cobalt-free concentration-gradient Li[Ni0.9Mn0.1]O2 cathode material for lithium-ion batteries

Shan Zhang et al.

Summary: The cathodes of LiNiO2, Li[Ni0.9Mn0.1]O2, and the concentration gradient material Li[Ni0.9Mn0.1]O2 were synthesized by co-precipitation method. Tests showed that the gradient material G-LNM91 exhibited the best cycle performance among the three materials, with significant improvement in cycle performance due to manganese substitution.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Physical

A Review of Degradation Mechanisms and Recent Achievements for Ni-Rich Cathode-Based Li-Ion Batteries

Ming Jiang et al.

Summary: The demand for sustainable energy storage has led to a need for rechargeable lithium-ion batteries with higher specific capacity and safety standards, which has put Ni-rich layered transition metal oxides in the spotlight. While these materials show promise for the next generation of batteries, their instability poses challenges for commercialization. This paper reviews degradation processes in Ni-rich cathode-based LIBs and discusses recent advancements in stabilization strategies for future battery components.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Enhanced oxygen evolution reaction activity of flower-like FeOOH via the synergistic effect of sulfur

Rui Guo et al.

Summary: The study successfully prepared S-modified FeOOH electrocatalysts via a hydrothermal method, showing excellent OER performance with Fe ions as the main active center. The influence of S on the catalytic process was found to be through various means affecting the coordination mode of the active center and forming a key (Fe-S)-O* bond.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Electrochemistry

Recent Development of Nickel-Rich and Cobalt-Free Cathode Materials for Lithium-Ion Batteries

Lukman Noerochim et al.

Summary: The exponential growth in production of electric vehicles has led to an increased demand for low-cost, high-performance lithium-ion batteries. However, concerns over the availability of cobalt, a high-cost and rare material used in high-nickel cathodes, may impact the price due to supply constraints. Developing cobalt-free high-nickel cathode materials, such as LiNi1-x-yMnxAlyO2, is necessary to address the reliance on cobalt and its high cost.

BATTERIES-BASEL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Structural and Electrochemical Impacts of Mg/Mn Dual Dopants on the LiNiO2 Cathode in Li-Metal Batteries

Linqin Mu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Multidisciplinary Sciences

A reflection on lithium-ion battery cathode chemistry

Arumugam Manthiram

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Dissolution of Lithium-Ion Batteries Cathode LiCoO2 by Polyethylene Glycol-Based Deep Eutectic Solvents at Mild Temperature

Yu Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Review Electrochemistry

A Brief Review of Post-Lithium-Ion Batteries

Tatiana L. Kulova et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)

Add to Collection

Article Electrochemistry

Effect of Copper-Doping on LiNiO2 Positive Electrode for Lithium-Ion Batteries

Xiang-Ze Kong et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Electrochemistry

Full-gradient structured LiNi0.8Co0.1Mn0.1O2 cathode material with improved rate and cycle performance for lithium ion batteries

Yunpeng Jiang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Cobalt-Free Nickel-Rich Positive Electrode Materials with a Core-Shell Structure

Ning Zhang et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

A path toward cobalt-free lithium-ion cathodes

Jason R. Croy et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Engineering, Environmental

Adsorption and visible-light-driven photocatalytic properties of Ag3PO4/WO3 composites: A discussion of the mechanism

Xuanwen Liu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Tao Deng et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries

Hoon-Hee Ryu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Cation Ordering of Zr-Doped LiNiO2 Cathode for Lithium-Ion Batteries

Chong S. Yoon et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Modification of LiNi0.8Co0.15Al0.05O2 using nanoscale carbon coating

Zhihao Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Electrochemistry

Role of Na+ in the Cation Disorder of [Li1-xNax]NiO2 as a Cathode for Lithium-Ion Batteries

Hanseul Kim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Multidisciplinary Sciences

Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries

Jiawei Qian et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Enhanced Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode for Lithium-Ion Batteries by Precursor Preoxidation

Congcong Zhang et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

A new design of highly reversible LiNiO2: Defect formation in transition metal site

Yo Kobayashi et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Surface Surgery of the Nickel-Rich Cathode Material LiNi0.815Co0.15Al0.035O2: Toward a Complete and Ordered Surface Layered Structure and Better Electrochemical Properties

Zhongfeng Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Factors affecting cycling life of LiNi0.8Co0.15Al0.05O2 for lithium-ion batteriest

Yoshinari Makimura et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Chemistry, Physical

Growth mechanisms for spherical mixed hydroxide agglomerates prepared by co-precipitation method: A case of Ni1/3Co1/3Mn1/3(OH)2

Yang Yue et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Physical

Control of electrochemical properties of nickel-rich layered cathode materials for lithium ion batteries by variation of the manganese to cobalt ratio

Ho-Hyun Sun et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Study of the lithium/nickel ions exchange in the layered LiNi0.42Mn0.42Co0.16O2 cathode material for lithium ion batteries: experimental and first-principles calculations

Haijun Yu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Electrochemical performance of La2O3-coated layered LiNiO2 cathode materials for rechargeable lithium-ion batteries

P. Mohan et al.

IONICS (2013)

Add to Collection

Article Chemistry, Physical

Synthesis and electrochemical performance of Li(Ni0.8Co0.15Al0.05)0.8(Ni0.5Mn0.5)0.2O2 with core-shell structure as cathode material for Li-ion batteries

Jeong-Hun Ju et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection

Article Electrochemistry

High-performance ZrO2-coated LiNiO2 cathode material

J Cho et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)

Add to Collection

Article Chemistry, Physical

The LixNi1-yMgyO2 (y=0.05, 0.10) system:: structural modifications observed upon cycling

C Pouillerie et al.

SOLID STATE IONICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.