☆ 4.7 Article

Enhanced energy storage performance of polyethersulfone-based dielectric composite via regulating heat treatment and filling phase

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Improved energy storage performance of polyimide nanocomposites by constructing the meso- and macroscopic interfaces

Minzun Ji et al.

Summary: Researchers have constructed sandwich-structured PI/BaTiO3 nanocomposites using in-situ synthesis and solution casting techniques, achieving an energy density of 7.44 J/cm3 while maintaining good charge-discharge efficiency. The organic/inorganic interfacial polarization and interlayer polarization significantly increase the dielectric constant. The sandwich structure redistributes the electric field and mitigates the electric field concentration, while the outer insulation layer blocks high current and heat breakdown paths. This work provides a new paradigm for exploring polyimide nanocomposites with enhanced energy density through a combination of experiments and simulations.

MATERIALS TODAY ENERGY (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Breakdown Strength of Ferroelectric Polymer Films for Capacitive Energy Storage by Incorporating Oriented Fluorographene

Zhuofan Yang et al.

Summary: As the demand for electrification increases, there is a need for high energy density (U-e) polymer nanodielectric films with improved breakdown strength (E-b) and reduced dielectric loss. In this study, fluorographene (FG) was used as a new nanofiller to develop high-E-b polymer nanodielectrics. By incorporating only 0.2 wt % FG with in-plane orientation, a significantly enhanced Eb and reduced dielectric loss were achieved. The high E-b effect of FG can be attributed to the low crystallinity of the polymer matrix and the FG-polymer interface with deep traps and less defects. This research offers a strategy for the development of high-Eb/high-Ue flexible dielectric capacitors.

ACS APPLIED NANO MATERIALS (2023)

Add to Collection

Article Polymer Science

Engineering of core@double-shell structured Zn@ZnO@PS particles in poly(vinylidene fluoride) composites towards significantly enhanced dielectric performances

Tian Yao et al.

Summary: Polymeric dielectrics with high epsilon ' and low loss are important for energy storage devices. In this study, Zn@ZnO@PS/PVDF composites were prepared to improve epsilon ' and restrain loss. The PS shell in the composites not only promotes interparticle and intraparticle polarizations, but also prevents long-range charges migration, resulting in enhanced dielectric properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

High-Entropy-Nanofibers Enhanced Polymer Nanocomposites for High-Performance Energy Storage

Lvye Dou et al.

Summary: There is a high demand for polymer composite dielectrics capable of high energy density, high efficiency, and high-temperature stability in electronic vehicles and power systems. However, a major challenge is the design of high-performance nanofillers that can improve both polarization and breakdown strength. In this study, high-entropy-induced ceramic nanofibers are developed as effective nanofillers to enhance the energy storage performance of polyetherimide (PEI) composites. This research provides a guideline for developing dielectric fillers with tunable properties and microstructures, promoting the development of high-performance polymer composites.

ADVANCED ENERGY MATERIALS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Application of Poly(ether sulfone)-Based Membranes in Clean Energy Technology

Dingqing Shi et al.

Summary: This review summarizes the research status and prospect of PES-based membranes in the field of clean energy, emphasizing their excellent performance and cost advantages in high temperature and temperature-changing environments.

CHEMISTRY-AN ASIAN JOURNAL (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Transformation Toughening in Solid Dielectrics

Ziming Cai et al.

Summary: A method to enhance the breakdown strength of solid dielectrics is proposed, and the internal mechanism is studied using a phase-field breakdown model. Simulation results show that phase transformation has a significant effect on the dielectric breakdown strength, especially when the critical electric fields for phase transformation and breakdown are comparable. Therefore, a reasonable design of phase-transformed dielectrics is expected to achieve high breakdown resistance.

ACS APPLIED ELECTRONIC MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Dielectric properties and energy storage performance of PVDF-based composites with MoS2@MXene nanofiller

Hou-Qing Wang et al.

Summary: 2D/2D heterostructures of 2D MoS2 grown on the surface of 2D transition metal carbide Ti3C2 MXene (MoS2@MXene) were successfully synthesized through hydrothermal reaction. MoS2@MXene was incorporated into PVDF to form the MoS2@MXene/PVDF composites, which exhibited excellent flexibility and high energy storage performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Interesting Influence of Different Inorganic Particles on the Energy Storage Performance of a Polyethersulfone-Based Dielectric Composite

Yue Zhang et al.

Summary: Currently, composite dielectric materials have shown great potential in the field, as they simultaneously enhance permittivity and breakdown strength. These materials enable lightweight and miniaturized dielectric capacitors, while promoting the development of energy storage and conversion devices. This study successfully prepared a polymer-based dielectric composite with excellent breakdown strength and energy storage performance.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Excellent Stability in Polyetherimide/SiO2 Nanocomposites with Ultrahigh Energy Density and Discharge Efficiency at High Temperature

Binzhou Sun et al.

Summary: In this study, PEI-based nanocomposites containing SiO2 nanoparticles were fabricated by solution casting, showing improved electrical conductivity and breakdown strength, especially at high temperatures. The PEI/SiO2-NPs nanocomposite exhibited superior dielectric energy storage performance under high temperature conditions.

SMALL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Significantly Enhanced Breakdown Strength and Energy Density in Nanocomposites by Synergic Modulation of Structural Design and Low-Loading Nanofibers

Hao Wang et al.

Summary: A newly designed sandwich-structured nanocomposite is proposed in this study, with low-loading BFSTO nanofibers as the polarization layer and PMMA/P(VDF-HFP) blend film as the insulation layer, resulting in significant enhancement of Eb and discharged energy density in the optimized composite. The outer layer of the composite has a low surface charge density, which helps impede charge injection and suppress leakage current, contributing to improved energy storage performance.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

Simulating dielectric breakdown based on Maxwell's equations with inhomogeneous conductivity

Qi Wang et al.

Summary: In this paper, a simulation method for dielectric breakdown behavior is proposed, which integrates the maximum electric field intensity criterion with Maxwell's equations. The stochasticity of breakdown strength is illustrated using a Gaussian distribution function, and a damage factor is introduced to differentiate intact and breakdown material. The finite element method is employed to solve Maxwell's equations considering the inhomogeneous material properties, and tree-like breakdown channels are obtained.

2022 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (IEEE CEIDP 2022) (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Flexible cyanoethyl cellulose-based nanocomposites with superior energy storage capability

Lukang Wu et al.

Summary: In this study, a new polymer-based composite film combining two-dimensional BN nanosheets and cyanoethyl cellulose was designed and prepared, showing significantly improved breakdown strength and high energy storage performance.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection

Article Engineering, Manufacturing

Microscopic residual stresses analysis and multi-objective optimization for 3D woven composites

Qi Wang et al.

Summary: A multiobjective optimization methodology was developed to balance low cost and high quality of 3D woven composites (3DWC). A multiscale process simulation model was proposed to calculate microscopic residual stresses in 3DWC, validated by experimental measurement. A surrogate model was constructed to reduce computational amount, and the optimization utilizing genetic algorithm achieved a Pareto front, with considerations for overall cure cycle in the process optimization.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Trilayer All-Polymer Dielectric Composites with Simultaneous High Efficiency and High Energy Density: A Novel Design Targeting for Advanced Energy Storage Capacitors

Liang Sun et al.

Summary: The unique design of an asymmetric all-polymer trilayer composite has been reported to achieve high energy density and high discharge efficiency. By utilizing a nonlinear dielectric layer for high energy density and a linear dielectric layer for high discharge efficiency, along with a transition layer to homogenize the electric field distribution, a significant improvement in breakdown strength and energy density has been demonstrated, resulting in a high efficiency of 89.9% and a high energy density of 12.15 J cm(-3).

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

All Polymer Dielectric Films for Achieving High Energy Density Film Capacitors by Blending Poly(Vinylidene Fluoride-Trifluoroethylene-Chlorofluoroethylene) with Aromatic Polythiourea

Chengwei Li et al.

NANOSCALE RESEARCH LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Tuning Nanofillers in In Situ Prepared Polyimide Nanocomposites for High-Temperature Capacitive Energy Storage

Ding Ai et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Chitin/MoS2 Nanosheet Dielectric Composite Films with Significantly Enhanced Discharge Energy Density and Efficiency

Huan Chen et al.

BIOMACROMOLECULES (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Polyimide films coated by magnetron sputtered boron nitride for high-temperature capacitor dielectrics

Sang Cheng et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Crosslinked fluoropolymers exhibiting superior high-temperature energy density and charge-discharge efficiency

He Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

High-k polymer nanocomposites with 1D filler for dielectric and energy storage applications

Xingyi Huang et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Excellent energy storage performance and thermal property of polymer-based composite induced by multifunctional one-dimensional nanofibers oriented in-plane direction

Yue Zhang et al.

NANO ENERGY (2019)

Add to Collection

Article Materials Science, Composites

Poly(vinylidene fluoride) terpolymer and poly(methyl methacrylate) composite films with superior energy storage performance for electrostatic capacitor application

Yingke Zhu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

High-Energy-Density Ferroelectric Polymer Nanocomposites for Capacitive Energy Storage: Enhanced Breakdown Strength and Improved Discharge Efficiency

Mengfan Guo et al.

MATERIALS TODAY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Excellent energy storage density and efficiency in blend polymer-based composites by design of core-shell structured inorganic fibers and sandwich structured films

Yang Cui et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Energy storage enhancement of P(VDF-TrFE-CFE)-based composites with double-shell structured BZCT nanofibers of parallel and orthogonal configurations

Yue Zhang et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Optimizing sandwich-structured composites based on the structure of the filler and the polymer matrix: toward high energy storage properties

Yang Cui et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

BaTiO3/MWNTs/Polyvinylidene Fluoride Ternary Dielectric Composites with Excellent Dielectric Property, High Breakdown Strength, and High-Energy Storage Density

Mingzhou Zhao et al.

ACS OMEGA (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Decorating TiO2 Nanowires with BaTiO3 Nanoparticles: A New Approach Leading to Substantially Enhanced Energy Storage Capability of High-k Polymer Nanocomposites

Da Kang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Manufacturing

High-energy-density with polymer nanocomposites containing of SrTiO3 nanofibers for capacitor application

Lingmin Yao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Multidisciplinary Sciences

Giant energy density and high efficiency achieved in bismuth ferrite-based film capacitors via domain engineering

Hao Pan et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Ferroelectric Polymer Nanocomposites with Complementary Nanostructured Fillers for Electrocaloric Cooling with High Power Density and Great Efficiency

Guangzu Zhang et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Nanostructured Ferroelectric-Polymer Composites for Capacitive Energy Storage

He Li et al.

SMALL METHODS (2018)

Add to Collection

Article Chemistry, Physical

Multilayer hierarchical interfaces with high energy density in polymer nanocomposites composed of BaTiO3@TiO2@Al2O3 nanofibers

Zhongbin Pan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrafast Discharge and Enhanced Energy Density of Polymer Nanocomposites Loaded with 0.5(Ba0.7Ca0.3)TiO3-0.5Ba(Zr0.2Ti0.8)O3 One-Dimensional Nanofibers

Zhongbin Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

ZnO Quantum Dot Decorated Zn2SnO4 Nanowire Heterojunction Photodetectors with Drastic Performance Enhancement and Flexible Ultraviolet Image Sensors

Ludong Li et al.

ACS NANO (2017)

Add to Collection

Article Nanoscience & Nanotechnology

High-Energy-Density Polymer Nanocomposites Composed of Newly Structured One-Dimensional BaTiO3@Al2O3 Nanofibers

Zhongbin Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Materials Science, Ceramics

Fast discharge and high energy density of nanocomposite capacitors using Ba0.6Sr0.4TiO3 nanofibers

Z. B. Pan et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Polymer Science

Multi-walled carbon nanotube/polyethersulfone nanocomposites for enhanced electrical conductivity, dielectric properties and efficient electromagnetic interference shielding at low thickness

Nadir Abbas et al.

MACROMOLECULAR RESEARCH (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Advanced polymeric dielectrics for high energy density applications

Tran Doan Huan et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Controlling the Structural Properties of Single Step, Dip Coated ZnO Seed Layers for Growing Perfectly Aligned Nanowire Arrays

Sophie Guillemin et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Strawberry-like Core-Shell Ag@Polydopamine@BaTiO3 Hybrid Nanoparticles for High-k Polymer Nanocomposites with High Energy Density and Low Dielectric Loss

Ke Yang et al.

ADVANCED MATERIALS INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical interfaces induce high dielectric permittivity in nanocomposites containing TiO2@BaTiO3 nanofibers

Xin Zhang et al.

NANOSCALE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Aromatic Polythiourea Dielectrics with Ultrahigh Breakdown Field Strength, Low Dielectric Loss, and High Electric Energy Density

Shan Wu et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Electrochemistry

Controllable dielectric and electrical performance of polymer composites with novel core/shell-structured conductive particles through biomimetic method

Dan Yang et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Review Physics, Applied

A review on the dielectric materials for high energy-storage application

Xihong Hao

JOURNAL OF ADVANCED DIELECTRICS (2013)

Add to Collection

Article Physics, Applied

Size-dependent low-frequency dielectric properties in the BaTiO3/poly(vinylidene fluoride) nanocomposite films

Ben-Hui Fan et al.

APPLIED PHYSICS LETTERS (2012)

Add to Collection

Article Engineering, Manufacturing

Polylmide/BaTiO3 composites with controllable dielectric properties

SH Xie et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.