☆ 4.7 Article

Dynamic compression behavior of CoCrFeMnNi high-entropy alloy fabricated by direct energy deposition additive manufacturing

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Thickness effect on the microstructures, mechanical properties, and anisotropy of laser-powder bed fusion processed 316L stainless steel

Soung Yeoul Ahn et al.

Summary: This study investigates the effects of thin-wall thickness on the microstructures, properties, and anisotropy of laser-powder bed fusion processed thin-walled structures. The results show that the wall thickness has a significant influence on the microstructural characteristics, tensile properties, and anisotropic behavior of the thin-walled structures. Thicker walls promote epitaxial columnar growth, while reducing the geometrically necessary dislocation density and increasing the columnar grain aspect ratio. The tensile strength decreases and elongation increases with increasing wall thickness, and the degree of anisotropy also increases.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review

G. M. Karthik et al.

Summary: Metal additive manufacturing (MAM) is a new technology for producing complex metallic parts, and understanding the relationship between thermal cycles and microstructures in MAM parts is crucial. This review covers the evolution of microstructures in MAM parts and discusses residual stresses, anisotropy, and the effects of post-MAM heat treatment.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Strain Rate Effects on the Mechanical Properties of an AlCoCrFeNi High-Entropy Alloy

Chuan Ting Wang et al.

Summary: The effect of strain rate on the compressive properties of an AlCoCrFeNi high-entropy alloy was investigated. The alloy exhibited high strain rate sensitivity, especially under dynamic compression. Constitutive equations were derived to predict the strength of the alloy under various strain rates.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Determination of Johnson-Cook Material Parameters for Armour Plate Using DIC and FEM

Sangeeta Khare et al.

Summary: Understanding material behavior of armour steel under large deformations and high strains during loading is crucial. Johnson-Cook flow stress and failure models were used for modeling and predicting the material behavior. Material parameters were determined experimentally through tests at different strain rates and temperatures.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Columnar to equiaxed transition in additively manufactured CoCrFeMnNi high entropy alloy

Hongge Li et al.

Summary: A single-track CoCrFeMnNi high entropy alloy was prepared by laser melting deposition, with the microstructural evolution of columnar to equiaxed transition observed experimentally. A solidification map was established combining experimental observations and numerical simulations to quantitatively reveal the underlying correlation between solidification parameters and microstructural morphology. During the laser melting deposition process, a decrease in the ratio of gradient temperature to solidification rate induced columnar to equiaxed transition, which could have implications on the production of bulk components with the desired microstructure and high performance.

MATERIALS & DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Constitutive modeling of the hot deformation behavior of CoCrFeMnNi high-entropy alloy

Christopher Brown et al.

Summary: The study investigates the plastic flow behavior of high-entropy alloys under hot compression conditions and evaluates the suitability of various constitutive models, with some models showing reasonable accuracy in predicting the deformation behavior of the alloy. Microstructural analysis confirms the occurrence of discontinuous dynamic recrystallization during deformation at lower strain rates.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of temperature and loading rate on phase stability and deformation mechanism in metastable V10Cr10Co30FexNi50-x high entropy alloys

Dong Geun Kim et al.

Summary: This study investigates the compressive properties of high entropy alloys under different conditions, revealing variations in deformation mechanisms based on Fe content, testing temperature, and loading rate. The stability of FCC and the activation of TWIP and TRIP modes are correlated to these factors, showing a systematic shift in deformation mechanisms.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Revealing relationships between heterogeneous microstructure and strengthening mechanism of austenitic stainless steels fabricated by directed energy deposition (DED)

Zhou Yan et al.

Summary: In this study, the evolution of trans-scale heterogeneous structures in austenitic stainless steels fabricated by Directed Energy Deposition (DED) was systematically investigated. The impact of these structures on yield strength was quantified, with dislocation intensity being the main contributor to strength, especially the GND type accounting for over 60% of total dislocations. Despite the presence of micro inclusions in DED steel, a synergistic effect between deformation twinning and pre-existing GND-induced back stress contributes to high tensile plasticity.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels

Jung Gi Kim et al.

Summary: The rapid melting and solidification cycle in additive manufacturing creates metastable microstructures that contribute to the strength of additively manufactured alloys. The role of dislocation cell structure on the mechanical property of additively manufactured stainless steels was investigated. The finer cell networks found in the 304L stainless steels induced more interactions with dislocations, leading to higher strength during tensile test.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances on High-Entropy Alloys for 3D Printing

Changjun Han et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

K. M. Bertsch et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Dynamic Behavior of Aluminum Alloy Aw 5005 Undergoing Interfacial Friction and Specimen Configuration in Split Hopkinson Pressure Bar System at High Strain Rates and Temperatures

Amine Bendarma et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion

Peng Chen et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal and Oxidation Behavior of CoCrFeMnNi Alloy with and Without Yttrium Oxide Particle Dispersion

Monika Vilemova et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Add to Collection

Article Physics, Multidisciplinary

Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified

Yazhou Guo et al.

PHYSICAL REVIEW LETTERS (2019)

Add to Collection

Review Chemistry, Physical

A review on fundamental of high entropy alloys with promising high-temperature properties

Jian Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property

Ruidi Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy

Jeong Min Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting

Z. G. Zhu et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment

Tadashi Fujieda et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy

Sun Ig Hong et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

On the strain rate-dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at liquid nitrogen temperature

Jongun Moon et al.

MATERIALS RESEARCH LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

G. Laplanche et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Anomalies in the deformation mechanism and kinetics of coarse-grained high entropy alloy

Mageshwari Komarasamy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy

N. Kumar et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Add to Collection

Review Materials Science, Multidisciplinary

High-Entropy Alloys: A Critical Review

Ming-Hung Tsai et al.

MATERIALS RESEARCH LETTERS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural effects on adiabatic shear band formation

S. Osovski et al.

SCRIPTA MATERIALIA (2012)

Add to Collection

Article Physics, Multidisciplinary

Dynamic Recrystallization as a Potential Cause for Adiabatic Shear Failure

D. Rittel et al.

PHYSICAL REVIEW LETTERS (2008)

Add to Collection

Editorial Material Multidisciplinary Sciences

Materials science - The statistical mechanics of strain-hardened metals

Anter El-Azab

SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Adiabatic shear bands in α-titanium tube under external explosive loading

B. F. Wang et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.