☆ 4.7 Article

Enabling high dielectric constant and low loss tangent in BaTiO3-epoxy composites through a 3D interconnected network structure of ceramic phase

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to overcome the challenge of obtaining a high dielectric constant in ceramic-polymer composites with low ceramic volume fraction. By using a high sintering temperature and introducing a porogen, the researchers were able to obtain BaTiO3 ceramics with high porosity and great connectivity. The composites prepared with these ceramics showed improved dielectric constants at low ceramic volume fractions. The composite with a sintering temperature of 1300 degrees C and a ceramic volume fraction of 38.1% exhibited a dielectric constant of 466.8, which was about nine times higher compared to the counterpart with a higher ceramic volume fraction of 60.8%. The composite also exhibited low dielectric loss and good frequency and temperature stability, indicating its potential for practical applications. Finite element simulation showed that the enhanced connectivity of BaTiO3 played a key role in the dielectric response of the composite.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Epoxy-based/BaTiO3 nanodielectrics: Relaxation dynamics, charge transport and energy storage

Stavros X. Drakopoulos et al.

Summary: The dielectric relaxations, charge transport dynamics, and capacitive energy storage of epoxy/BaTiO3 nanocomposites developed at low nanofiller concentrations were investigated. Two relaxation processes, alpha- and beta-relaxations, were observed, attributed to different mechanisms. The increase in nanofiller content was found to have a beneficial effect on charge transport properties.

MATERIALS RESEARCH BULLETIN (2022)

Add to Collection

Review Chemistry, Physical

Recent developments in BaTiO3 based lead-free materials for energy storage applications

Aditya Jain et al.

Summary: The rapid rise in energy consumption and low emission requirements have led to the development of efficient and environment-friendly green energy sources. BaTiO3 based materials have attracted attention for energy storage applications due to their improved properties. This review provides a comprehensive overview of recent developments in BaTiO3 based single-phase and composite systems, focusing on synthesis techniques, properties, and their impact on energy storage. It also summarizes the key strategies and models for enhancing energy density and efficiency, along with examples of commercial applications in various fields.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Polymer-/Ceramic-based Dielectric Composites for Energy Storage and Conversion

Hong Hui Wu et al.

Summary: This review summarizes the recent progress in high-performance polymer- and ceramic-based dielectric composites for capacitive energy storage and harvesting, solid-state cooling, temperature stability, electromechanical energy interconversion, and high-power applications. The review also discusses emerging fabrication techniques and theoretical calculation methods, and provides a brief perspective on the future development of composite dielectrics for energy and electronic devices.

ENERGY & ENVIRONMENTAL MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to obtain high dielectric constant (εr) BaTiO3 ceramics with improved connectivity and high porosity, leading to the preparation of composites with enhanced εr at low ceramic volume fraction. These composites show low dielectric loss, good frequency and temperature stability, and great potential for practical applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Review Chemistry, Physical

Polymer-based dielectrics with high permittivity for electric energy storage: A review

Jun-Wei Zha et al.

Summary: This review discusses the current research and development trends in polymer-based dielectric materials, focusing on key factors for improving permittivity and introducing the latest technological advancements.

NANO ENERGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

A rational design of core-shell-satellite structured BaTiO3 fillers for epoxy-based composites with enhanced microwave dielectric constant and low loss

Meng Zhang et al.

Summary: This study developed a novel type of core-shell satellite structured Barium Titanate (BT) nanoparticles, incorporated with polydopamine (PDA) layers and silver (Ag) nanoparticles, to prepare high dielectric constant and low loss nanocomposites. The modified BT/EP composites showed enhanced dielectric constant and suppressed loss, especially at the highest filler volume fraction. The polarization and loss mechanisms of the composites were proposed and the novel strategy of incorporating PDA and Ag for improved properties was emphasized for potential 5G applications.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Construction of a Three-Dimensional BaTiO3 Network for Enhanced Permittivity and Energy Storage of PVDF Composites

Xueqing Bi et al.

Summary: The research investigated the performance of a three-dimensional BaTiO3 (3D BT)/polyvinylidene fluoride (PVDF) composite dielectric material constructed via the sol-gel method, revealing that the composite with 21.1% 3D BT content exhibited the best comprehensive dielectric and energy storage capabilities.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Significantly enhanced dielectric permittivity and low loss in epoxy composites incorporating 3d W-WO3/BaTiO3 foams

Wenqiang Zhang et al.

Summary: This study proposes a new design strategy for high dielectric permittivity composite materials, achieving high dielectric permittivity and low loss simultaneously by introducing W-WO3/BaTiO3 foam into an epoxy matrix and increasing the oxidation temperature. Finite element simulation results show that the formation of a WO3 shell on the surface of W helps weaken the leakage current density and significantly reduce the loss.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Dielectric properties and discharge energy density of epoxy composites with 3D BaTiO3 network structure

Gasidit Panomsuwan et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Dielectric characterisation of epoxy nanocomposite with barium titanate fillersInspec keywordsOther keywords

Romana Zafar et al.

IET NANODIELECTRICS (2020)

Add to Collection

Article Chemistry, Physical

Significantly enhanced permittivity and energy density in dielectric composites with aligned BaTiO3 lamellar structures

Ru Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of BaTiO3 nanoparticles as shape modified filler for high dielectric constant ceramic-polymer composite

Taehee Kim et al.

RSC ADVANCES (2020)

Add to Collection

Article Polymer Science

Curing behaviors of cyanate ester/epoxy copolymers and their dielectric properties

Yangxue Lei et al.

HIGH PERFORMANCE POLYMERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Construction of a 3D-BaTiO3 network leading to significantly enhanced dielectric permittivity and energy storage density of polymer composites

Suibin Luo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Materials Science, Ceramics

Enhanced dielectric permittivity of BaTiO3/epoxy resin composites by particle alignment

Dong Seok Kim et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Study on effect of cubic- and tetragonal phased BaTiO3 on the electrical and thermal properties of polymeric nanocomposites

A. A. Thanki et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Unique pure barium titanate foams with three-dimensional interconnecting pore channels and their high-k cyanate ester resin composites at very low barium titanate loading

Longhui Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Add to Collection

Article Materials Science, Ceramics

Preparation and dielectric properties of PATP-coated nano-BaTiO3/epoxy resin composites

Xuedong Wei et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Chemistry, Physical

A systematic study on electrical properties of the BaTiO3-epoxy composite with different sized BaTiO3 as fillers

Wenhu Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Composites

被撤回的出版物: Preparation and dielectric properties of BaTiO3/epoxy nanocomposites for embedded capacitor application (Retracted article. See vol. 115, pg. 87, 2015)

Zhong-Feng Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Role of Interface in Highly Filled Epoxy/BaTiO3 Nanocomposites. Part I-Correlation between Nanoparticle Surface Chemistry and Nanocomposite Dielectric Property

Xingyi Huang et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Polyaniline stabilized barium titanate nanoparticles reinforced epoxy nanocomposites with high dielectric permittivity and reduced flammability

Xi Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2013)

Add to Collection

Review Engineering, Electrical & Electronic

Embedded Capacitors in Printed Wiring Board: A Technological Review

Mohammed A. Alam et al.

JOURNAL OF ELECTRONIC MATERIALS (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Fundamentals, processes and applications of high-permittivity polymer matrix composites

Zhi-Min Dang et al.

PROGRESS IN MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Composites

Study on microstructure and dielectric property of the BaTiO3/epoxy resin composites

Zhi-Min Dang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Polymer Science

Dielectric properties of polymer/ceramic composites based on thermosetting polymers

Fen Chao et al.

POLYMER BULLETIN (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Dielectric properties of epoxy resin-barium titanate composites at high frequency

Kuo-Chung Cheng et al.

MATERIALS LETTERS (2007)

Add to Collection

Article Engineering, Manufacturing

Effect of silane as coupling agent on the dielectric properties of BaTiO3-epoxy composites

L. Ramajo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Add to Collection

Article Polymer Science

Effect of dehydroxylation of hydrothermal barium titanate on dielectric properties in polystyrene composite

P Badheka et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

Add to Collection

Article Engineering, Manufacturing

Dielectric response and relaxation phenomena in composites of epoxy resin with BaTiO3 particles

L Ramajo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Study on epoxy/BaTiO3 composite embedded capacitor films (ECFs) for organic substrate applications

SD Cho et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2004)

Add to Collection

Article Materials Science, Ceramics

Dielectric behaviours of multi-doped BaTiO3/epoxy composites

DH Kuo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Effective dielectric properties of composite materials: The dependence on the particle size distribution

A Spanoudaki et al.

PHYSICAL REVIEW B (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.