☆ 4.7 Article

Influence of the substituent LiNbO3 in the structural, ferroelectric, dielectric, optical and mechanical properties of K0.5Bi0.5TiO3

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Multidisciplinary

Dissolution of four-stage to three-stage dynamic scaling behavior with stabilization of relaxor character in K0.5B0.5TiO3 based binary system

Seethal Pappachan et al.

Summary: In this study, the dynamic scaling of a ferroelectric material, using K0.5Bi0.5TiO3 (KBT) as the base material and LiNbO3 (LN) as the substituent, is reported. The results show that the composition and structure of the material significantly affect its ferroelectric and relaxor properties.

PHYSICA SCRIPTA (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced electrocaloric effect, energy storage density and pyroelectric response from a domain-engineered lead-free BaTi0.91Sn0.08Zr0.01O3 ferroelectric ceramic

Hend Kacem et al.

Summary: In this study, a BaTi0.91Sn0.08Zr0.01O3 (BTSZ) ceramic was prepared and its structural, dielectric, ferroelectric, and pyroelectric properties were studied. The ceramic exhibited phase transitions close to room temperature, resulting in improved piezoelectric, pyroelectric, and electrocaloric performance. The effects of electric field poling and the Olsen cycle on the ceramic's properties were also investigated.

RSC ADVANCES (2022)

Add to Collection

Article Materials Science, Ceramics

Anomalous dielectric behavior of poled K0.5Bi0.5TiO3 ceramics

Manish Badole et al.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Temperature-insensitive piezoelectric properties of lead-free BiFeO3 -BaTiO3 ceramics with high Curie temperature

Muhammad Habib et al.

Summary: This research has achieved excellent piezoelectric performance in lead-free ceramics, with high piezoelectric strain, low strain hysteresis, high Curie temperature, and a high figure of merit, making it suitable for a wide range of high-temperature commercial applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Fracture behavior in electrically poled alkaline bismuth- and potassium-based lead-free piezoceramics using Vickers indentation

Xueyao Wang et al.

Summary: The fracture behavior of unpoled and electrically poled KNN and NBT-based lead-free piezoceramics was characterized in this study, showing that NBT-based ceramics have the largest fracture toughness in the unpoled state, while KNN and NBT ceramics exhibit large fracture toughness along the poling direction in the electrically poled state. These results are rationalized based on variations of remanent strain and process zone related to material texture and properties during crack propagation.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Ceramics

Enhanced energy storage efficiency by modulating field-induced strain in BaTiO3-Bi(Ni2/3Ta1/3)O3 lead-free ceramics

Huayu Zhao et al.

Summary: By introducing the BNT component to modify BT ceramics, the field-induced strain was reduced and the breakdown strength was enhanced, resulting in higher energy storage efficiency for the BT-BNT ceramics.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Thermally-stable high energy-storage performance over a wide temperature range in relaxor-ferroelectric Bi1/2Na1/2TiO3-based ceramics

Fazli Akram et al.

Summary: Lead-free zirconium-modified Bi-1/2(Na0.78K0.22)(1/2)TiO3 ceramics were synthesized in this study, showing the presence of different phases and studying the ferroelectric polarization response under temperature variations. The results demonstrate that the addition of Zr can enhance the energy-storage properties of the ceramics, extending the operating temperature range and benefiting the application of energy storage devices.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

The effect of Zn2+ and Nb5+ substitution on structural, dielectric, electrocaloric properties, and energy storage density of Ba0.95Ca0.05Ti0.95Zr0.05O3 ceramics

Hanen Abdmouleh et al.

Summary: Lead-free ceramic samples were successfully prepared using a solid-state reaction method, with identified morphotropic phase boundary and confirmed ferroelectric properties, dielectric constant behavior, and energy storage density. Additionally, an electrocaloric effect was determined for a specific sample near room temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Realizing High Comprehensive Energy Storage and Ultrahigh Hardness in Lead-Free Ceramics

Jie Xing et al.

Summary: This study achieved materials in KNN ceramics that possess both high energy storage density and high hardness, providing significant guidance for applications in pulsed-power systems.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electrocaloric properties of lead-free ferroelectric ceramic near room temperature

Hend Kacem et al.

Summary: This study synthesized a lead-free solid solution of BaTi0.91Sn0.09O3 and characterized it using X-ray diffraction and scanning electron microscopy. The material showed promising electrocaloric properties, making it a viable option for refrigeration applications.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Relaxor characteristics and pyroelectric energy harvesting performance of BaTi0.91Sn0.09O3 ceramic

Hend Kacem et al.

Summary: Ferroelectric materials, such as lead-free BaTi0.91Sn0.09O3 ceramic, are widely used in sensors, transducers, and health monitoring systems due to their multi-physical coupling ability for energy harvesting applications. The structural information of the sample was determined using X-ray diffraction data and Raman spectra, showing ferroelectric behavior in relaxation. The sample exhibited a recovered energy density of 48.18 mJ/cm(3) and an energy efficiency of 41%, making it suitable for energy conversion applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Less temperature-dependent high dielectric and energy-storage properties of eco-friendly BiFeO3-BaTiO3-based ceramics

Fazli Akram et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Greatly enhanced discharge energy density and efficiency of novel relaxation ferroelectric BNT-BKT-based ceramics

Di Hu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Grain size engineered lead-free ceramics with both large energy storage density and ultrahigh mechanical properties

Zetian Yang et al.

NANO ENERGY (2019)

Add to Collection

Article Materials Science, Ceramics

Phase structure and energy storage performance for BiFeO3-BaTiO3 based lead-free ferroelectric ceramics

Li-Feng Zhu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Tailoring frequency-insensitive large field-induced strain and energy storage properties in (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3-modified (Bi0.5Na0.5)TiO3 lead-free ceramics

Wangfeng Bai et al.

DALTON TRANSACTIONS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Piezoelectric and ferroelectric properties of lead-free Ga-modified 0.65BiFeO3-0.35BaTiO3 ceramics by water quenching process

Salman Ali Khan et al.

FERROELECTRICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature stable dielectric properties of lead-free BiFeO3-BaTiO3 modified with LiTaO3 ceramics

Fazli Akram et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Influence of excess sodium addition on the structural characteristics and electrical conductivity of Na0.5Bi0.5TiO3

Rahul Bhattacharyya et al.

SOLID STATE IONICS (2018)

Add to Collection

Article Materials Science, Ceramics

Electromechanical properties of ternary BiFeO3-0.35BaTiO3-BiGaO3 piezoelectric ceramics

Fazli Akram et al.

JOURNAL OF ELECTROCERAMICS (2018)

Add to Collection

Article Chemistry, Physical

Structural distortion, ferroelectricity and ferromagnetism in Pb(Ti1-xFex)O3

Arun Kumar Yadav et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Physics, Applied

Normal- relaxor ferroelectric modulation of a-site complex perovskite ferroelectric (K1/2Bi1/2)TiO3 by post-annealing

Jinjian Guo et al.

JOURNAL OF APPLIED PHYSICS (2017)

Add to Collection

Review Physics, Applied

BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives

M. Acosta et al.

APPLIED PHYSICS REVIEWS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation on structural, Mossbauer and ferroelectric properties of (1-x)PbFe0.5Nb0.5O3-(x)BiFeO3 solid solution

Sunanda T. Dadami et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Structure evolution and large strain response in BNT-BT lead-free piezoceramics modified with Bi(Ni0.5Ti0.5)O3

Wangfeng Bai et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Ceramics

Solid-State Synthesis and Properties of Relaxor (1-x)BKT-xBNZ Ceramics

Espen T. Wefring et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Ceramics

Grain size effect on piezoelectric and ferroelectric properties of BaTiO3 ceramics

Yu Huan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Spectroscopy

Structural and optical properties of Er3+/Yb3+ doped barium titanate phosphor prepared by co-precipitation method

Manoj Kumar Mahata et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2014)

Add to Collection

Software Review Chemistry, Multidisciplinary

WinCSD: software package for crystallographic calculations (Version 4)

Lev Akselrud et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2014)

Add to Collection

Article Materials Science, Ceramics

The Composition and Temperature-Dependent Structure Evolution and Large Strain Response in (1-x)(Bi0.5Na0.5)TiO3-xBa(Al0.5Ta0.5)O3 Ceramics

Wangfeng Bai et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

Add to Collection

Article Physics, Applied

Polarization and strain response in Bi0.5K0.5TiO3-BiFeO3 ceramics

Maxim I. Morozov et al.

APPLIED PHYSICS LETTERS (2012)

Add to Collection

Article Chemistry, Physical

Enhancement of the temperature stabilities in yttrium doped (Ba0.99Ca0.01)(Ti0.98Zr0.02)O3 ceramics

Wei Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Add to Collection

Article Physics, Applied

Ferroelectric properties and dynamic scaling of ⟨100⟩ oriented (K0.5Na0.5)NbO3 single crystals

Shashaank Gupta et al.

APPLIED PHYSICS LETTERS (2011)

Add to Collection

Article Physics, Applied

Relaxor behavior of (K0.5Bi0.5)TiO3 ceramics derived from molten salt synthesized single-crystalline nanowires

Jianfeng Yang et al.

APPLIED PHYSICS LETTERS (2007)

Add to Collection

Article Materials Science, Characterization & Testing

A structural study of the (Na1-xKx)0.5Bi0.5TiO3 perovskite series as a function of substitution (x) and temperature

GO Jones et al.

POWDER DIFFRACTION (2002)

Add to Collection

Article Physics, Condensed Matter

Estimation of the compressibility of Na0.5Bi0.5TiO3 and related perovskite-type titanates

J Kreisel et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.