☆ 4.7 Article

Condensation heat transfer and pressure drop of R1234yf/HFC mixtures inside small diameter channels

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

A universal correlation for flow condensation heat transfer in horizontal tubes based on machine learning

Feng Nie et al.

Summary: This study presents machine learning methods for predicting flow condensing heat transfer coefficients inside horizontal tubes based on an assembled database, and demonstrates excellent predictive performances of the designed ML models. A new universal correlation is developed, showing reliable predictions for all data points in the database.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Add to Collection

Article Thermodynamics

Condensation heat transfer of R1234ze(E) and its A1 mixtures in small diameter channels

Marco Azzolin et al.

Summary: R1234ze(E) has emerged as a low Global Warming Potential substitute for R134a. However, it is mildly flammable. This study compares the heat transfer coefficients and two-phase pressure drops of R450A and R515B binary mixtures with R1234ze(E) as potential non-flammable alternatives.

INTERNATIONAL JOURNAL OF REFRIGERATION (2022)

Add to Collection

Article Thermodynamics

Artificial neural networks application on friction factor and heat transfer coefficients prediction in tubes with inner helical-finning

A. N. Skrypnik et al.

Summary: A new model of artificial neural network is proposed in this study to predict friction factor and heat transfer coefficients for turbulent flow in tubes with inner helical-finning. The model applies to all types of inner helical tube finning and achieves good accuracy over the entire database.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Comprehensive experimental evaluation of R1234yf-based low GWP working fluids for refrigeration and heat pumps

Ali Khalid Shaker Al-Sayyab et al.

Summary: This study presents an experimental comparison of low GWP refrigerants in vapour compression cooling and heating systems. The results show that R513A has the highest COP in cooling mode and the highest heating capacity in heating mode compared to the other refrigerants. The internal heat exchanger (IHX) has a positive influence on the refrigerating effect for all refrigerants.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Thermodynamics

Experimental study on the operating characteristics of a display refrigerator phasing out R134a to R1234ze(E) and its binary blends

H. G. Ramirez-Hernandez et al.

Summary: This study compares the operating characteristics of different refrigerants in light commercial refrigeration and finds that using pure R1234ze(E) and R1234ze(E)-R134a blends as a replacement for R134a is a suitable short-term solution.

INTERNATIONAL JOURNAL OF REFRIGERATION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental performance evaluation of the dual-evaporator ejector refrigeration system using environmentally friendly refrigerants of R1234ze (E), ND, R515a, R456a, and R516a as a replacement for R134a

Uemit Iskan et al.

Summary: The study aimed to investigate the influence of entrainment ratio (ER) and condensing temperature (CT) on the performance of a dual evaporator ejector system (DEES) using different refrigerants. The results showed significant differences in performance and cooling capacity among the refrigerants, with R516a being the best alternative to replace R134a.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Optimizing filter rule parameters with genetic algorithm and stock selection with artificial neural networks for an improved trading: The case of Borsa Istanbul

Mehmet Ozcalici et al.

Summary: The study explores the use of filter rule and genetic algorithm for identifying profitable trading points in stock markets, and utilizes artificial neural networks for stock selection. The results demonstrate significantly higher returns for the selected stocks compared to the buy and hold strategy.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Prediction of amorphous forming ability based on artificial neural network and convolutional neural network

Fei Lu et al.

Summary: In this study, two models, artificial neural network and convolutional neural network, are proposed for accurately predicting the amorphous forming ability of various amorphous alloys, achieving higher prediction accuracy than the current criteria.

COMPUTATIONAL MATERIALS SCIENCE (2022)

Add to Collection

Article Thermodynamics

Improved correlation for heat transfer during condensation in mini and macro channels

Mirza M. Shah

Summary: An improved version of the earlier correlation for heat transfer during condensation in both conventional and micro channels is presented and validated with a database containing various fluids, channel diameters, and operating conditions. The improved correlation provides more accurate predictions compared to other correlations, considering a wide range of experimental parameters and data sources.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Improved correlation for heat transfer during condensation in mini and macro channels

Mirza M. Shah

Summary: An improved correlation for heat transfer during condensation in conventional and mini channels is proposed and validated with a large amount of data.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Optimizing filter rule parameters with genetic algorithm and stock selection with artificial neural networks for an improved trading: The case of Borsa Istanbul

Mehmet Ozcalici et al.

Summary: In this study, filter rule parameters were optimized using genetic algorithms and stock selection was performed with artificial neural networks to achieve excess returns over the market average. The results suggest that Borsa Istanbul may be a weak form efficient market, but utilizing artificial neural networks can lead to higher profits for investors.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

Add to Collection

Article Thermodynamics

Comparative analysis of HFO-1234ze(E) and R-515B as low GWP alternatives to HFC-134a in moderately high temperature heat pumps

Carlos Mateu-Royo et al.

Summary: This study analyzed the performance of HFO-1234ze(E) and R-515B as low GWP refrigerants to replace HFC-134a in different heat pump applications, showing a significant reduction in CO2 emissions compared to HFC-134a and natural gas boilers. Although both refrigerants have comparable energy and environmental performance, R-515B has an advantage in terms of installation safety as a non-flammable refrigerant.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

Add to Collection

Article Thermodynamics

Condensation and flow boiling heat transfer of a HFO/HFC binary mixture inside a minichannel

Marco Azzolin et al.

Summary: This study focused on the heat transfer coefficients of refrigerant blends mixing HFC and HFO in a microchannel, comparing the mixture coefficients with data from pure fluids components and discussing the importance of mass transfer resistance and heat transfer penalization.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Machine learning based approach for the prediction of flow boiling/condensation heat transfer performance in mini channels with serrated fins

Guangya Zhu et al.

Summary: This study investigates two-phase flow boiling and condensation heat transfer in mini channels, developing experimental systems to generate data and training Artificial Neural Network models for prediction. The research shows that using the most important parameters can lead to a reasonable model with satisfactory prediction performance, which can be utilized in future studies and practical heat exchanger design.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

R513A condensation heat transfer inside tubes: Microfin tube vs. smooth tube

Andrea Diani et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant condensation heat transfer inside herringbone-type Brazed Plate Heat Exchangers (BPHE)

Giovanni A. Longo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Experimental analysis of the use of R1234yf and R1234ze(E) as drop-in alternatives of R134a in a water-to-water heat pump

Luigi Pietro Maria Colombo et al.

INTERNATIONAL JOURNAL OF REFRIGERATION (2020)

Add to Collection

Article Thermodynamics

Visualization and Numerical Simulations of Condensing Flow in Small Diameter Channels

Paolo Toninelli et al.

HEAT TRANSFER ENGINEERING (2019)

Add to Collection

Article Thermodynamics

R450A and R513A as lower GWP mixtures for high ambient temperature countries: Experimental comparison with R134a

Pavel Makhnatch et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Experimental study of R1234yf as a drop-in replacement for R134a in an oil-free refrigeration system

Zhaohua Li et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Convective condensation at low mass flux: Effect of turbulence and tube orientation on the heat transfer

Marco Azzolin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Comparative experimental procedures for measuring the local heat transfer coefficient during flow boiling in a microchannel

Stefano Bortolin et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

Add to Collection

Article Thermodynamics

Simple and general correlation for heat transfer during flow condensation inside plain pipes

Carlos A. Dorao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Low GWP refrigerants condensation inside a 2.4 mm ID microfin tube

Andrea Diani et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)

Add to Collection

Article Thermodynamics

New adiabatic and condensation two-phase flow pattern maps of R14 in a horizontal tube

Qinglu Song et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Experimental results and design procedures for minichannel condensers and evaporators using propylene

Davide Del Col et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2017)

Add to Collection

Article Thermodynamics

Prediction of heat transfer coefficient during condensation of R134a in inclined tubes using artificial neural network

Sadra Azizi et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Engineering, Chemical

Frictional Pressure Drop during Two-Phase Flow of Pure Fluids and Mixtures in Small Diameter Channels

Davide Del Col et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Condensation heat transfer and two-phase frictional pressure drop in a single minichannel with R1234ze(E) and other refrigerants

Davide Del Col et al.

INTERNATIONAL JOURNAL OF REFRIGERATION (2015)

Add to Collection

Article Engineering, Chemical

Frictional Pressure Drop during Two-Phase Flow of Pure Fluids and Mixtures in Small Diameter Channels

Davide Del Col et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Comprehensive experimental investigation of two-phase heat transfer and pressure drop with propane in a minichannel

Davide Del Col et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2014)

Add to Collection

Article Thermodynamics

Experiments and updated model for two phase frictional pressure drop inside minichannels

Davide Del Col et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

Universal approach to predicting heat transfer coefficient for condensing mini/micro-channel flow

Sung-Min Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

Condensation Heat Transfer and Pressure Losses of High- and Low-Pressure Refrigerants Flowing in a Single Circular Minichannel

Alberto Cavallini et al.

HEAT TRANSFER ENGINEERING (2011)

Add to Collection

Article Thermodynamics

Heat transfer and pressure drop during condensation of the low GWP refrigerant R1234yf

D. Del Col et al.

INTERNATIONAL JOURNAL OF REFRIGERATION (2010)

Add to Collection

Article Thermodynamics

Experimental study on condensation heat transfer inside a single circular minichannel

Marko Matkovic et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Condensation in horizontal smooth tubes: A new heat transfer model for heat exchanger design

Alberto Cavallini et al.

HEAT TRANSFER ENGINEERING (2006)

Add to Collection

Article Thermodynamics

Condensation in horizontal tubes, part 1: two-phase flow pattern map

J El Hajal et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2003)

Add to Collection

Article Thermodynamics

Condensation of halogenated refrigerants inside smooth tubes

A Cavallini et al.

HVAC&R RESEARCH (2002)

Add to Collection

Article Thermodynamics

Experimental investigation on condensation heat transfer and pressure drop of new HFC refrigerants (R134a, R125, R32, R410A, R236ea) in a horizontal smooth tube

A Cavallini et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.