☆ 4.7 Article

An integrated lot-sizing and scheduling problem in a reconfigurable manufacturing system under workforce constraints

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Artificial Intelligence

Reconfigurability improvement in Industry 4.0: a hybrid genetic algorithm-based heuristic approach for a co-generation of setup and process plans in a reconfigurable environment

Muhammad Ameer et al.

Summary: The objective of this study is to develop a new approach that jointly considers setup and process plan constraints. An integrated setup and process plan is generated based on the relationships between operations, minimizing total cost. Experimental results show the economic gain of simultaneously considering setup and process planning.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Add to Collection

Article Management

Scheduling of Multi-Robot Job Shop Systems in Dynamic Environments: Mixed-Integer Linear Programming and Constraint Programming Approaches

Soroush Fatemi-Anaraki et al.

Summary: This paper investigates a dynamic scheduling problem in a job shop robotic cell, and proposes a solution using Mixed-Integer Linear Programming and Constraint Programming. The paper also explores the impact of buffer pick-up criteria, changes in robots' speed, and rescheduling priority on the model's output.

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE (2023)

Add to Collection

Article Operations Research & Management Science

The capacitated lot-sizing and energy efficient single machine scheduling problem with sequence dependent setup times and costs in a closed-loop supply chain network

Abdolreza Roshani et al.

Summary: This paper addresses the capacitated lot-sizing and scheduling problem with sequence dependent setup times and costs in a closed loop supply chain. A mixed integer programming formulation and algorithms are proposed to solve the problem, and the effectiveness of the algorithms is verified through experimental instances.

ANNALS OF OPERATIONS RESEARCH (2023)

Add to Collection

Article Engineering, Industrial

Production scheduling in a reconfigurable manufacturing system benefiting from human-robot collaboration

Behdin Vahedi-Nouri et al.

Summary: This paper explores an integrated production scheduling and workforce planning problem in a Reconfigurable Manufacturing System (RMS) using reconfigurable machines and human-robot collaboration. A new Mixed-Integer Linear Programming (MILP) model and an efficient Constraint Programming (CP) model are developed to solve the problem. Computational experiments show the superiority of the CP model over the MILP model in smaller instances and its ability to find high-quality solutions for larger instances within a reasonable computation time. It provides recommendations for managers dealing with this complex problem.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2023)

Add to Collection

Article Automation & Control Systems

Integrated lot-sizing and scheduling: Mitigation of uncertainty in demand and processing time by machine learning

Mohammad Rohaninejad et al.

Summary: This paper presents a method for scheduling and rescheduling in production management, taking into account sequence-dependent setup times and capacity constraints. The objective is to find a trade-off between safety levels and production costs in the face of uncertainty. The proposed algorithm, which combines satisfiability modulo theories, neural networks, and a K-means based heuristic, is efficient and promising in protecting the schedulability of the model.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2023)

Add to Collection

Article Management

New integer optimization models and an approximate dynamic programming algorithm for the lot-sizing and scheduling problem with sequence-dependent setups

Younsoo Lee et al.

Summary: This paper proposes new integer optimization models for the lot-sizing and scheduling problem with sequence-dependent setups. It introduces a standard model and a novel time-flow model, and conducts computational experiments to demonstrate their competitiveness.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2022)

Add to Collection

Article Engineering, Industrial

An improved genetic algorithm for flexible job shop scheduling problem considering reconfigurable machine tools with limited auxiliary modules

Jiaxin Fan et al.

Summary: This paper investigates the flexible job shop scheduling problem with machine reconfigurations (FJSP-MR) and proposes an improved genetic algorithm (IGA) to minimize the total weighted tardiness. Experimental results show that the proposed algorithm is highly efficient in various scenarios and the specially designed local search is an effective component for the basic genetic algorithm. Additionally, a real-world engineering case is studied to demonstrate the applicability of the algorithm to large-scale problems.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

Add to Collection

Article Management

Hybrid matheuristics to solve the integrated lot sizing and scheduling problem on parallel machines with sequence-dependent and non-triangular setup

Desiree M. Carvalho et al.

Summary: This paper addresses the integrated lot sizing and scheduling problem on parallel machines, proposing efficient methods that significantly outperform the CPLEX solver in most tested instances.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Solving a parallel-line capacitated lot-sizing and scheduling problem with sequence-dependent setup time/cost and preventive maintenance by a rolling horizon method

Mahyar Alimian et al.

Summary: This paper introduces a novel Mixed-Integer Nonlinear Programming model for dealing with a parallel-line Capacitated Lot-Sizing Problem with sequence-dependent setup time and preventive maintenance planning. By developing MIP-based heuristic algorithms, optimal solutions were obtained and compared with traditional methods.

COMPUTERS & INDUSTRIAL ENGINEERING (2022)

Add to Collection

Article Engineering, Industrial

Distributed job-shop rescheduling problem considering reconfigurability of machines: a self-adaptive hybrid equilibrium optimiser

M. Mahmoodjanloo et al.

Summary: The recent trend of economic globalization has been accelerated by new communication technologies, forcing companies to adapt to rapidly changing market demands with a flexible production system. Reconfigurable machine tools (RMTs) are used as a resource for flexibility in manufacturing systems. This study investigates a distributed job-shop rescheduling problem where facilities benefit from reconfigurable machines, aiming to minimize total weighted lateness in a dynamic state using a self-adaptive hybrid equilibrium optimiser algorithm.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2022)

Add to Collection

Article Engineering, Industrial

Intelligent scheduling and reconfiguration via deep reinforcement learning in smart manufacturing

Shengluo Yang et al.

Summary: This study explores intelligent scheduling and reconfiguration for a reconfigurable flow line (RFL) using deep reinforcement learning (DRL) for the first time. A system architecture and mathematical model are proposed for smart manufacturing, with a DRL system designed for scheduling and reconfiguration agents. The A2C-based approach outperforms traditional meta-heuristics in solution quality and CPU times.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2022)

Add to Collection

Article Engineering, Industrial

Workforce planning and production scheduling in a reconfigurable manufacturing system facing the COVID-19 pandemic

Behdin Vahedi-Nouri et al.

Summary: This paper investigates a joint workforce planning and production scheduling problem during the COVID-19 pandemic by leveraging the adaptability and flexibility of a Reconfigurable Manufacturing System (RMS). Novel models and a hybrid solution approach are developed to effectively address the issue.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

Add to Collection

Proceedings Paper Automation & Control Systems

Integrated Lot-sizing and Job Shop Scheduling Benefiting From Reconfigurable Machine Tools

Mohammad Rohaninejad et al.

Summary: This study investigates the integrated lot-sizing and job shop scheduling problem in reconfigurable manufacturing systems and develops a novel mathematical model for simultaneous optimization of scheduling, planning, and machine configuration, leading to improved system performance.

IFAC PAPERSONLINE (2022)

Add to Collection

Article Management

Multi-level, multi-stage lot-sizing and scheduling in the flexible flow shop with demand information updating

Hakeem-Ur-Rehman et al.

Summary: Motivated by a real-world problem in an automobile manufacturing firm, this study focuses on the multi-level, multi-stage lot-sizing and scheduling problem with demand information updating. By using a martingale model and mixed-integer programming, three heuristic algorithms were proposed to solve this NP-hard problem, with Heuristic 1 showing the best performance in computational experiments compared to the benchmark procedure.

INTERNATIONAL TRANSACTIONS IN OPERATIONAL RESEARCH (2021)

Add to Collection

Article Management

MIP approaches for a lot sizing and scheduling problem on multiple production lines with scarce resources, temporary workstations, and perishable products

Willy A. O. Soler et al.

Summary: This paper addresses a lot sizing and scheduling problem in the food industry, proposing a mixed integer programming model and a branching rule, as well as an efficient relax-and-fix procedure. Computational experiments show that the proposed approaches outperform a commercial solver and an established relax-and-fix heuristic in the literature.

JOURNAL OF THE OPERATIONAL RESEARCH SOCIETY (2021)

Add to Collection

Article Engineering, Industrial

Solving a flexible job shop lot sizing problem with shared operations using a self-adaptive COA

Hadi Abdollahzadeh Sangroudi et al.

Summary: This paper discusses lot sizing decisions in a flexible job shop manufacturing system, proposing a novel mathematical model and utilizing a self-adaptive Cuckoo Optimisation Algorithm to solve the problem.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

Add to Collection

Article Engineering, Industrial

A multi-objective particle swarm optimisation for integrated configuration design and scheduling in reconfigurable manufacturing system

Jianping Dou et al.

Summary: The study focuses on the integrated optimization problem of configuration design and scheduling for a reconfigurable manufacturing system (RMS), and proposes a multi-objective particle swarm optimization (MoPSO) method. Comparative results show that MoPSO outperforms epsilon-constraint method and nondominated sorting genetic algorithm II (NSGA-II) in both solution quality and computation efficiency.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

Add to Collection

Article Engineering, Industrial

Incorporating order acceptance, pricing and equity considerations in the scheduling of cloud manufacturing systems: matheuristic methods

Behdin Vahedi-Nouri et al.

Summary: Cloud Manufacturing (CMfg) is a novel customer-oriented manufacturing norm rooted from the Industry 4.0 principles, which can assist enterprises in surviving in today's highly competitive market. CMfg systems consist of two separate parties, customers and factories, each with independent individuals, aiming to maximize utilities and enhance equity among their members.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Process Planning, Scheduling, and Layout Optimization for Multi-Unit Mass-Customized Products in Sustainable Reconfigurable Manufacturing System

Sini Gao et al.

Summary: This paper addresses the complex problem of producing sustainable mass-customized products in a reconfigurable manufacturing system, requiring integration of process planning, scheduling, and layout optimization to enhance system performance. A multi-objective mathematical model is formulated to optimize the three problems simultaneously, and NSGA-III is employed to obtain approximate Pareto-optimal solutions effectively and efficiently.

SUSTAINABILITY (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Approaches for the joint resolution of lot-sizing and scheduling with infeasibilities occurrences

Fernanda F. Alves et al.

Summary: The independent consideration of production lot-sizing and scheduling decisions may lead to infeasible production plans, an increase in costs, and inadequate use of resources. This study proposes iterative strategies to address these issues, finding that hierarchical and iterative approaches can efficiently provide high-quality solutions in short computational times.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A polynomial-time scheduling approach to minimise idle energy consumption: An application to an industrial furnace

Ondrej Benedikt et al.

Summary: This article introduces a novel scheduling approach to minimize energy consumption during idle periods by integrating complete time-domain dynamics with an idle energy function. The proposed method aims to achieve higher energy savings compared to existing scheduling approaches by utilizing optimal control and scheduling strategies.

COMPUTERS & OPERATIONS RESEARCH (2021)

Add to Collection

Review Engineering, Industrial

Industry 4.0 smart reconfigurable manufacturing machines

Jeff Morgan et al.

Summary: This paper provides a fundamental research review of Reconfigurable Manufacturing Systems (RMS) and explores the state-of-the-art in distributed and decentralized machine control and machine intelligence. Key areas reviewed include RMS fundamentals, machine control technologies, and machine intelligence paradigms. The paper establishes a vision for next-generation Industry 4.0 manufacturing machines with Smart and Reconfigurable (SR*) capabilities.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Production scheduling for the reconfigurable modular pharmaceutical manufacturing processes

Congqin Ge et al.

Summary: The study proposes a multi-stage hybrid discrete/continuous-time scheduling framework to fully utilize the benefits of reconfigurable modular production systems. By solving a discrete-time lot-sizing MILP model and constructing a continuous-time LP model, decent results are achieved in its application to a modular continuous production system.

COMPUTERS & CHEMICAL ENGINEERING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Data-driven branching and selection for lot-sizing and scheduling problems with sequence-dependent setups and setup carryover

Canrong Zhang et al.

Summary: The paper proposes two mixed integer programming models for solving the capacitated lot-sizing and machine scheduling problem with sequence-dependent setup time and setup carryover, presents a Dantzig-Wolfe decomposition per machine to improve lower bounds, and uses a branching and selection method to solve the problem.

COMPUTERS & OPERATIONS RESEARCH (2021)

Add to Collection

Article Engineering, Industrial

Ageing workforce effects in Dual-Resource Constrained job-shop scheduling

Nicola Berti et al.

Summary: The increasing percentage of aging workforce requires evaluation of physical capacities and experience levels, as well as adjustment to the working environment. Digitalization and automation tools can be used to address these issues and improve both production system performance and workers' well-being.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2021)

Add to Collection

Article Management

A heuristic based on mathematical programming for a lot-sizing and scheduling problem in mold-injection production

Yasmin A. Rios-Solis et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2020)

Add to Collection

Article Engineering, Industrial

New integration of preventive maintenance and production planning with cell formation and group scheduling for dynamic cellular manufacturing systems

Mahyar Alimian et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

Add to Collection

Article Operations Research & Management Science

Mathematical model and solution approaches for integrated lot-sizing, scheduling and cutting stock problems

Gislaine Mara Melega et al.

ANNALS OF OPERATIONS RESEARCH (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Flexible job shop scheduling problem with reconfigurable machine tools: An improved differential evolution algorithm

Mehdi Mahmoodjanloo et al.

APPLIED SOFT COMPUTING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An exact optimization approach for an integrated process configuration, lot-sizing, and scheduling problem

Karim Perez Martinez et al.

COMPUTERS & OPERATIONS RESEARCH (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A two-stage ant colony algorithm for hybrid flow shop scheduling with lot sizing and calendar constraints in printed circuit board assembly

Wei Qin et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

IBM ILOG CP optimizer for scheduling 20+years of scheduling with constraints at IBM/ILOG

Philippe Laborie et al.

CONSTRAINTS (2018)

Add to Collection

Article Engineering, Industrial

A coupled process configuration, lot-sizing and scheduling model for production planning in the molded pulp industry

Karim Perez Martinez et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2018)

Add to Collection

Review Engineering, Mechanical

Reconfigurable manufacturing systems: Principles, design, and future trends

Yoram Koren et al.

FRONTIERS OF MECHANICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Industrial

Behaviour perception-based disruption models for the parallel machine capacitated lot-sizing and scheduling problem

Huasheng Yang et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Integrated lot sizing and energy-efficient job shop scheduling problem in manufacturing/remanufacturing systems

Davide Giglio et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Solving discrete lot-sizing and scheduling by simulated annealing and mixed integer programming

Sara Ceschia et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2017)

Add to Collection

Article Management

A GLNPSO for multi-level capacitated lot-sizing and scheduling problem in the poultry industry

Atiwat Boonmee et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2016)

Add to Collection

Article Operations Research & Management Science

MULTI-OBJECTIVE OPTIMIZATION OF INTEGRATED LOT-SIZING AND SCHEDULING PROBLEM IN FLEXIBLE JOB SHOPS

Mohammad Rohaninejad et al.

RAIRO-OPERATIONS RESEARCH (2016)

Add to Collection

Article Computer Science, Artificial Intelligence

A self-adaptive PSO for joint lot sizing and job shop scheduling with compressible process times

M. Karimi-Nasab et al.

APPLIED SOFT COMPUTING (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Lot sizing and job shop scheduling with compressible process times: A cut and branch approach

M. Karimi-Nasab et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A hybrid Lagrangian-simulated annealing-based heuristic for the parallel-machine capacitated lot-sizing and scheduling problem with sequence-dependent setup times

Jing Xiao et al.

COMPUTERS & OPERATIONS RESEARCH (2015)

Add to Collection

Article Automation & Control Systems

Simultaneous lot-sizing and scheduling in flexible job shop problems

Mohammad Rohaninejad et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Management

Flow shop scheduling with heterogeneous workers

Alexander J. Benavides et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2014)

Add to Collection

Article Engineering, Industrial

Solving the integrated lot-sizing and job-shop scheduling problem

Edwin David Gomez Urrutia et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2014)

Add to Collection

Article Engineering, Industrial

A new heuristic for integrated process planning and scheduling in reconfigurable manufacturing systems

A. Bensmaine et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2014)

Add to Collection

Article Engineering, Multidisciplinary

Hybrid simulated annealing and MIP-based heuristics for stochastic lot-sizing and scheduling problem in capacitated multi-stage production system

Reza Ramezanian et al.

APPLIED MATHEMATICAL MODELLING (2013)

Add to Collection

Article Engineering, Industrial

Design, refinement, implementation and prototype testing of a reconfigurable lathe-mill

Alejandro Aguilar et al.

JOURNAL OF MANUFACTURING SYSTEMS (2013)

Add to Collection

Review Management

Recent developments in Dual Resource Constrained (DRC) system research

J. Xu et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2011)

Add to Collection

Article Engineering, Industrial

A genetic algorithm for lot sizing and scheduling under capacity constraints and allowing backorders

Jose Fernando Goncalves et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)

Add to Collection

Article Engineering, Industrial

Synchronisation of scarce resources for a parallel machine lotsizing problem

Christian Almeder et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)

Add to Collection

Article Engineering, Industrial

A genetic algorithm for simultaneous optimisation of lot sizing and scheduling in a flow line assembly

P. L. K. Palaniappan et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2011)

Add to Collection

Article Engineering, Industrial

Dynamic multi-machine lotsizing and sequencing with simultaneous scheduling of a common setup resource

Horst Tempelmeier et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2008)

Add to Collection

Article Management

Planning and scheduling by logic-based benders decomposition

J. N. Hooker

OPERATIONS RESEARCH (2007)

Add to Collection

Article Engineering, Manufacturing

Dynamics of the arch-type reconfigurable machine tool

Jaspreet Dhupia et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)

Add to Collection

Article Engineering, Industrial

Conceptual framework for lot-sizing and scheduling of flexible flow lines

D Quadt et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.