Related references
Note: Only part of the references are listed.Automated identification of slip system activity fields from digital image correlation data
T. Vermeij et al.
ACTA MATERIALIA (2023)
Towards an image quality criterion to optimize Digital image correlation. Use of an analytical model to optimize acquisition conditions
J. P. Goulmy et al.
OPTICS AND LASER TECHNOLOGY (2022)
Mechanical behavior of polycrystals: Coupled in situ DIC-EBSD analysis of pure copper under tensile test
J. P. Goulmy et al.
MATERIALS CHARACTERIZATION (2022)
Deformation twinning and detwinning in extruded Mg-4Al: In-situ experiment and crystal plasticity simulation
Mohammadreza Yaghoobi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
A dual-phase crystal plasticity finite-element method for modeling the uniaxial deformation behaviors of thermally aged SAC305 solder
Mingwei Xie et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Numerical prediction of {1122}(1123) compression twin activation in commercially pure titanium under uniaxial tension
Yoshiki Kawano et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
A convolutional neural network based crystal plasticity finite element framework to predict localised deformation in metals
Olga Ibragimova et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Crystal cracking of grain-gradient aluminum by a combined CPFEM-CZM method
Li -Ya Liu et al.
ENGINEERING FRACTURE MECHANICS (2021)
Finite element simulation of ductile fracture in polycrystalline materials using a regularized porous crystal plasticity model
Mikhail Khadyko et al.
INTERNATIONAL JOURNAL OF FRACTURE (2021)
Modeling damage evolution of graphene/aluminum composites considering crystal cracking and interface failure
Li-Ya Liu et al.
COMPOSITE STRUCTURES (2021)
On crystallographic aspects of heterogeneous plastic flow during ductile tearing: 3D measurements and crystal plasticity simulations for AA7075-T651
Thilo F. Morgeneyer et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
A new macroscopic strain hardening function based on microscale crystal plasticity and its application in polycrystal modeling
Sudeep K. Sahoo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Crystal Plasticity Finite Element Modeling of Extension Twinning in WE43 Mg Alloys: Calibration and Validation
Mohammadreza Yaghoobi et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2021)
Effects of Boundary Conditions on Microstructure-Sensitive Fatigue Crystal Plasticity Analysis
Krzysztof S. Stopka et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2021)
Identification of crystal plasticity parameters for a non-irradiated and irradiated A508 bainite steel
Can-Ngon Nguyen et al.
METALLURGICAL RESEARCH & TECHNOLOGY (2021)
Microscopic heterogeneity of plastic strain and lattice rotation in partially recrystallized copper polycrystals
Fengxiang Lin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses
Harris Farooq et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel
Wenqi Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Assessment of surface and bulk-dominated methodologies to measure critical resolved shear stresses in hexagonal materials
Aritra Chakraborty et al.
ACTA MATERIALIA (2020)
Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach
A. Githens et al.
ACTA MATERIALIA (2020)
Modelling of elastic modulus of a biphasic ceramic microstructure using 3D representative volume elements
Pedro M. C. Carneiro et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
SciPy 1.0: fundamental algorithms for scientific computing in Python
Pauli Virtanen et al.
NATURE METHODS (2020)
Quantitative evaluation of slip activity in polycrystalline α-titanium considering non-local interactions between crystal grains
Yoshiki Kawano et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Microstructure-sensitive critical plastic strain energy density criterion for fatigue life prediction across various loading regimes
Ritwik Bandyopadhyay et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2020)
High strain rate micro-compression for crystal plasticity constitutive law parameters identification
S. Breumier et al.
MATERIALS & DESIGN (2020)
Micromechanical modeling of fatigue crack initiation in hydrogen atmosphere
Nikolai Arnaudov et al.
MECHANICS OF MATERIALS (2020)
A numerical study of the influence of crystal plasticity modeling parameters on the plastic anisotropy of rolled aluminum sheet
M. Kasemer et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2020)
Radical Voronof tessellation from random pack of polydisperse spheres: Prediction of the cells' size distribution
Dorian Depriester et al.
COMPUTER-AIDED DESIGN (2019)
Interpretation of the size effects in micropillar compression by a strain gradient crystal plasticity theory
Eduardo Bittencourt
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
A CPFEM based study to understand the void growth in high strength dual-phase titanium alloy (Ti-10V-2Fe-3Al)
Umair Bin Asim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Probabilistic Modeling of Slip System-Based Shear Stresses and Fatigue Behavior of Coarse-Grained Ni-Base Superalloy Considering Local Grain Anisotropy and Grain Orientation
Benedikt Engel et al.
METALS (2019)
Investigation of strain redistribution mechanism in α titanium by image-based crystal plasticity analysis
Yoshiki Kawano et al.
EUROPEAN PHYSICAL JOURNAL B (2019)
Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression
Liu Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
PRISMS-Plasticity: An open-source crystal plasticity finite element software
Mohammadreza Yaghoobi et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Parameterization of a Non-local Crystal Plasticity Model for Tempered Lath Martensite Using Nanoindentation and Inverse Method
Jenni K. Engels et al.
FRONTIERS IN MATERIALS (2019)
The effect of cyclic-loading generated intergranular strains on the creep deformation of a polycrystalline material
A. A. Mamun et al.
MATERIALIA (2019)
optimParallel: An R Package Providing a Parallel Version of the L-BFGS-B Optimization Method
Florian Gerber et al.
R JOURNAL (2019)
Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions
Paul R. Dawson et al.
ACTA MATERIALIA (2018)
Deformation behavior of CP-titanium: Experiment and crystal plasticity modeling
M. Wronski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Measuring Ti-7Al slip system strengths at elevated temperature using high-energy X-ray diffraction
Darren C. Pagan et al.
SCRIPTA MATERIALIA (2018)
Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
Aritra Chakraborty et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)
Multi-scale crystal plasticity finite element method (CPFEM) simulations for shear band development in aluminum alloys
Yurui Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Crystal plasticity parameter identification with 3D measurements and Integrated Digital Image Correlation
Morgan Bertin et al.
ACTA MATERIALIA (2016)
Identification of crystal plasticity parameters using DIC measurements and weighted FEMU
Adrien Guery et al.
MECHANICS OF MATERIALS (2016)
Automatic processing of an orientation map into a finite element mesh that conforms to grain boundaries
S. Dancette et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)
Crack nucleation using combined crystal plasticity modelling, high-resolution digital image correlation and high-resolution electron backscatter diffraction in a superalloy containing non-metallic inclusions under fatigue
Tiantian Zhang et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)
An experimental study of the polycrystalline plasticity of austenitic stainless steel
Fabio Di Gioacchino et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Consistent representations of and conversions between 3D rotations
D. Rowenhorst et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2015)
Ab initio study of the intermetallics in Nb-Si binary system
I. Papadimitriou et al.
INTERMETALLICS (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
Methodology for estimating the critical resolved shear stress ratios of α-phase Ti using EBSD-based trace analysis
H. Li et al.
ACTA MATERIALIA (2013)
Study on Optimal Design Based on Direct Coupling Between a FEM Simulation Model and L-BFGS-B Algorithm
M. S. Berkani et al.
IEEE TRANSACTIONS ON MAGNETICS (2013)
A spectral method solution to crystal elasto-viscoplasticity at finite strains
P. Eisenlohr et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
On the strain hardening and texture evolution in high manganese steels: Experiments and numerical investigation
Yongqiang Li et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
A Simple Explicit Formula for the Voigt-Reuss-Hill Average of Elastic Polycrystals with Arbitrary Crystal and Texture Symmetries
Chi-Sing Man et al.
METHODS AND TASTES IN MODERN CONTINUUM MECHANICS: TO THE MEMORY OF DONALD E. CARLSON (2011)
Grain detection from 2d and 3d EBSD data-Specification of the MTEX algorithm
Florian Bachmann et al.
ULTRAMICROSCOPY (2011)
A Simple Explicit Formula for the Voigt-Reuss-Hill Average of Elastic Polycrystals with Arbitrary Crystal and Texture Symmetries
Chi-Sing Man et al.
JOURNAL OF ELASTICITY (2011)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities
Christophe Geuzaine et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2009)
Averaging quaternions
F. Landis Markley et al.
JOURNAL OF GUIDANCE CONTROL AND DYNAMICS (2007)
Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials
E. Heripre et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals
T Hoc et al.
ACTA MATERIALIA (2003)
Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: FE model
F Barbe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2001)
Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results
F Barbe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2001)