Related references
Note: Only part of the references are listed.3D printed, personalized sustained release cortisol for patients with adrenal insufficiency
S. Ayyoubi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2023)
Magistral Compounding with 3D Printing: A Promising Way to Achieve Personalized Medicine
Netta Beer et al.
THERAPEUTIC INNOVATION & REGULATORY SCIENCE (2023)
3D printing for personalised medicines: implications for policy and practice
Klaudia Englezos et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2023)
Towards point-of-care manufacturing and analysis of immediate-release 3D printed hydrocortisone tablets for the treatment of congenital adrenal hyperplasia
Tzuyi L. Yang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2023)
Fused deposition modeling 3D printing of solid oral dosage forms containing amorphous solid dispersions: How to elucidate drug dissolution mechanisms through surface spectral analysis techniques?
Chloe Parulski et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
Personalised paediatric chewable Ibuprofen tablets fabricated using 3D micro-extrusion printing technology
Atabak Ghanizadeh Tabriz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
Adrenal insufficiency
Eystein S. Husebye et al.
LANCET (2021)
Pharmacy preparations and compounding
Tjalling van der Schors et al.
EUROPEAN JOURNAL OF HOSPITAL PHARMACY (2021)
3D printed spherical mini-tablets: Geometry versus composition effects in controlling dissolution from personalised solid dosage forms
Sejad Ayyoubi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Can filaments be stored as a shelf-item for on-demand manufacturing of oral 3D printed tablets? An initial stability assessment
Tochukwu C. Okwuosa et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D Printing of Mini Tablets for Pediatric Use
Julius Krause et al.
PHARMACEUTICALS (2021)
Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?
Chloe Parulski et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
Influence of active pharmaceutical ingredient structures on Hansen solubility parameters
Eva Petrikova et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Fabrication of Intragastric Floating, Controlled Release 3D Printed Theophylline Tablets Using Hot-Melt Extrusion and Fused Deposition Modeling
Bhupendra Raj Giri et al.
PHARMACEUTICS (2020)
Three-dimensional printing technology as a promising tool in bioavailability enhancement of poorly water-soluble molecules: A review
Olivier Jennotte et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
A Biopredictive In Vitro Approach for Assessing Compatibility of a Novel Pediatric Hydrocortisone Drug Product within Common Pediatric Dosing Vehicles
Erik Wollmer et al.
PHARMACEUTICAL RESEARCH (2020)
Development of immediate release (IR) 3D-printed oral dosage forms with focus on industrial relevance
Marina Fanous et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets
Patricija Januskaite et al.
PHARMACEUTICS (2020)
Adrenal crises in children with adrenal insufficiency: epidemiology and risk factors
Ori Eyal et al.
EUROPEAN JOURNAL OF PEDIATRICS (2019)
The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM) 3D technique: Material considerations-printability-process modulation, with consecutive effects on in vitro release, stability and degradation
Kinga Ilyes et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen
Siddhant Palekar et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
The Biopharmaceutics Classification System (BCS) and the Biopharmaceutics Drug Disposition Classification System (BDDCS): Beyond guidelines
Aggelos Charalabidis et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Investigation of the parameters used in fused deposition modeling of poly (lactic acid) to optimize 3D printing sessions
E. Carlier et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Towards Printed Pediatric Medicines in Hospital Pharmacies: Comparison of 2D and 3D-Printed Orodispersible Warfarin Films with Conventional Oral Powders in Unit Dose Sachets
Heidi Oblom et al.
PHARMACEUTICS (2019)
Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments
Jiaxiang Zhang et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
Embedded 3D Printing of Novel Bespoke Soft Dosage Form Concept for Pediatrics
Katarzyna Rycerz et al.
PHARMACEUTICS (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
Kapilkumar Vithani et al.
PHARMACEUTICAL RESEARCH (2019)
Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
Peng Geng et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Integrating theoretical and experimental permeability estimations for provisional biopharmaceutical classification: Application to the WHO essential medicines
Miguel Angel Cabrera-Perez et al.
BIOPHARMACEUTICS & DRUG DISPOSITION (2018)
Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
Qijun Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Gayathri Kollamaram et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
G. Verstraete et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
Carolin Korte et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2018)
3D Printed Starmix Drug Loaded Dosage Forms for Paediatric Applications
Nicolaos Scoutaris et al.
PHARMACEUTICAL RESEARCH (2018)
3D Printing in Pharmaceutical and Medical Applications - Recent Achievements and Challenges
Witold Jamroz et al.
PHARMACEUTICAL RESEARCH (2018)
Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
Jehad M. Nasereddin et al.
PHARMACEUTICAL RESEARCH (2018)
Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
Evert Fuenmayor et al.
PHARMACEUTICS (2018)
Pediatric Adrenal Insufficiency: Diagnosis, Management, and New Therapies
Sasigarn A. Bowden et al.
INTERNATIONAL JOURNAL OF PEDIATRICS (2018)
Content uniformity of quartered hydrocortisone tablets in comparison with mini-tablets for paediatric dosing
Jude Madathilethu et al.
BMJ PAEDIATRICS OPEN (2018)
Personalized Medicine in Pediatrics: The Clinical Potential of Orodispersible Films
J. Carolina Visser et al.
AAPS PHARMSCITECH (2017)
Effect of ball milling on the physicochemical properties of atorvastatin calcium sesquihydrate: the dissolution kinetic behaviours of milled amorphous solids
Makiko Kobayashi et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2017)
Quality of compounded hydrocortisone capsules used in the treatment of children
Uta Neumann et al.
EUROPEAN JOURNAL OF ENDOCRINOLOGY (2017)
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Jiaxiang Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D Printing technologies for drug delivery: a review
Leena Kumari Prasad et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
Muzna Sadia et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Regional intestinal drug permeation: Biopharmaceutics and drug development
Hans Lennernas
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Orally disintegrating mini-tablets (ODMTs) - A novel solid oral dosage form for paediatric use
I. Stoltenberg et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2011)
Formulation design for poorly water-soluble drugs based on biopharmaceutics classification system: Basic approaches and practical applications
Yohei Kawabata et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Minitablets: New Modality to Deliver Medicines to Preschool-Aged Children
Sarah A. Thomson et al.
PEDIATRICS (2009)
Physicochemical properties and oral bioavailability of amorphous atorvastatin hemi-calcium using spray-drying and SAS process
Jeong-Soo Kim et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2008)
Pediatric drugs - A review of commercially available oral formulations
Robert G. Strickley et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Multimechanism oral dosage forms fabricated by three dimensional printing™
CW Rowe et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Dissolution of hydrocortisone in human and simulated intestinal fluids
BL Pedersen et al.
PHARMACEUTICAL RESEARCH (2000)