☆ 4.6 Article

Propylamine hydrobromide passivated tin-based perovskites to efficient solar cells

International Journal of Minerals Metallurgy and Materials (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Efficient Bulk Defect Suppression Strategy in FASnI3 Perovskite for Photovoltaic Performance Enhancement

Bohong Chang et al.

Summary: A novel bulk defect suppression strategy is proposed by introducing large organic piperazine cations into the lattice of 3D FASnI(3) perovskite to restrain the generation of bulk defects, enhancing device performance of Sn-based perovskite solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

The Voltage Loss in Tin Halide Perovskite Solar Cells: Origins and Perspectives

Xin Zhang et al.

Summary: This study reviewed the characteristics of tin halide perovskite solar cells, discussed the origins of V-loss, and introduced strategies for suppression to improve performance, outlining prospects for further enhancement.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Tin Halide Perovskites: From Fundamental Properties to Solar Cells

Matteo Pitaro et al.

Summary: Metal halide perovskites, particularly tin-based compounds, show promise for optoelectronic applications, with lead-based compounds being toxic and harmful to the environment. Although tin-based perovskites offer advantages such as near-optimal bandgap and good charge carrier mobilities, their efficiency is currently limited by low defect tolerance, fast crystallization, and oxidative instability. Efforts are being made to improve tin-based perovskite solar cells, focusing on strategies to enhance device performances and address existing challenges in a concerted manner.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly oriented quasi-2D layered tin halide perovskites with 2-thiopheneethylammonium iodide for efficient and stable tin perovskite solar cells

Yanting Xu et al.

Summary: The report demonstrates improved efficiency and stability of perovskite solar cells by fabricating quasi-2D hybrid tin-based perovskite films compared to traditional 3D tin-based perovskites.

NEW JOURNAL OF CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Lead-Free Perovskite Solar Cells with Over 10% Efficiency and Size 1 cm2 Enabled by Solvent-Crystallization Regulation in a Two-Step Deposition Method

Xiao Liu et al.

Summary: Researchers solved the efficiency decrease issue of tin perovskite solar cells with increased cell area by using a rarely used two-step deposition method that increased steric hindrance to hydroxyl in solvent molecules for dense and homogeneous film formation. The films fabricated with the two-step method exhibited higher uniformity in both horizontal and longitudinal directions, resulting in achieving over 10% power conversion efficiency for TPSCs. The cells maintained over 92% of its initial efficiency after operation under 1 sun illumination for 1000 hours.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Recent progress in inorganic tin perovskite solar cells

Miaomiao Zhang et al.

Summary: Perovskite solar cells using inorganic tin-based materials have achieved efficiencies exceeding 10%, but Sn(2+) oxidation remains a critical issue. This review focuses on the origin, degradation mechanisms, characterization techniques, and potential approaches to inhibit Sn(2+) oxidation in inorganic tin-based perovskites for solar cell applications. Effective solutions to enhance photovoltaic performance, including power conversion efficiency and device stability, are discussed.

MATERIALS TODAY ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Self-assembled TiO2 hole-blocking layers for efficient perovskite solar cells

Zhongbao Que et al.

Summary: Self-assembly of TiO2 films as hole-blocking layers is a simple and effective method to enhance the power conversion efficiency of mesoporous perovskite solar cells. Optimizing the thickness of TiO2 films can further improve the performance of PSCs.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Efficient passivation of surface defects by lewis base in lead-free tin-based perovskite solar cells

Hejin Yan et al.

Summary: This study demonstrates the effective passivation of surface defects in tin-based perovskite using Lewis base molecules. The passivation performance is determined by the hardness of the Lewis base molecules, which stabilizes the surface defects by modifying charge distribution and reducing deep band gap states. Hard Lewis base molecules like edamine and Isatin-Cl show better healing effects on defects-contained tin-based perovskite surfaces. The research provides a general strategy for engineering stable and high-efficiency lead-free Sn-based perovskite solar cells.

MATERIALS TODAY ENERGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Indent-Free Vapor-Assisted Surface Passivation Strategy toward Tin Halide Perovskite Solar Cells

Zheng Zhang et al.

Summary: This study introduces a new vapor passivation method to improve the performance of Sn halide perovskite solar cells. Compared to liquid passivation, vapor passivation does not decrease the short-circuit current density and can enhance the efficiency.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Efficiency enhancement of Cs0.1(CH3NH3)0.9PbI3 perovskite solar cell by surface passivation using iso-butyl ammonium iodide

Wakul Bumrungsan et al.

Summary: The efficiency of Cs-0.1(CH3NH3)(0.9)PbI3 solar cells was enhanced by passivating with iso-butyl ammonium iodide (IBA). The devices with 5-mg IBA passivation showed a higher power conversion efficiency (PCE) of 15.49% compared to non-IBA passivated devices (12.64%). This improvement was attributed to the reduction of PbI2 phase, lower charge recombination rate, lower charge transfer resistance, and improved contact angle of perovskite films. Thus, IBA passivation is a promising technique for improving the efficiency of Cs-doped perovskite solar cells.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Enhanced efficiency and stability in Sn-based perovskite solar cells by trimethylsilyl halide surface passivation

Zheng Zhang et al.

Summary: This study proposes an effective strategy based on trimethylsilyl halide surface passivation to enhance the film quality and stability of lead-free tin perovskite solar cells (PKSCs). The efficiency and stability of the solar cells were significantly improved after applying this strategy.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Suppressing the formation of tin vacancy yields efficient lead-free perovskite solar cells

Shurong Wang et al.

Nano Energy (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Sequential Passivation for Lead-Free Tin Perovskite Solar Cells with High Efficiency

Zheng Zhang et al.

Summary: Lead-free tin perovskite solar cells (PKSCs) have low efficiency due to rough surface morphology and high number of defects. A posttreatment strategy using sequential passivation with acetylacetone (ACAC) and ethylenediamine (EDA) is proposed to reduce trap density, enlarge grain size, and regulate energy level. The study achieves a promising 13% efficiency with better stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Lewis base manipulated crystallization for efficient tin halide perovskite solar cells

Shurong Wang et al.

Summary: Tin halide perovskite, a lead-free perovskite material, is improved in terms of crystallization process and morphology by introducing thiourea (TU). The efficiency of tin perovskite solar cell is significantly enhanced, achieving over 10% and outperforming the original device by 24%.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Reducing the interfacial voltage loss in tin halides perovskite solar cells

Bin Chen et al.

Summary: By using a hydrophobic bulky molecule to passivate the lead-free perovskite surface, the open-circuit voltage loss is significantly reduced and the efficiency of the solar cell is improved. This treatment also suppresses interface non-radiative recombination, extends the carrier lifetime, enhances vertical carrier transportation, and reduces the density of defect states and residual stress accumulation.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Suppression of Defect and Trap Density through Dimethylammonium-Substituted Tin Perovskite Solar Cells

Muhammad Akmal Kamarudin et al.

Summary: The research focuses on improving the performance of lead-free tin-based perovskite solar cells by using A-site cation substitution with DMAI salt. The optimized concentration of DMAI enhances the solar cell's performance, leading to higher open-circuit voltage, better surface morphology, higher built-in potential, and suppressed tin oxidation, which in turn reduces the hole carrier density.

ACS MATERIALS LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Slow Passivation and Inverted Hysteresis for Hybrid Tin Perovskite Solar Cells Attaining 13.5% via Sequential Deposition

Efat Jokar et al.

Summary: A sequential deposition procedure was used to passivate the surface of a hybrid mixed cationic tin perovskite with PHSCN, leading to improved photoluminescence lifetime and charge-extraction rate. Increased storage period enhanced device performance, with an ion-migration model proposed to explain observed phenomena. The device remained stable after 3000 hours of shelf storage in a glovebox.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Propylammonium Chloride Additive for Efficient and Stable FAPbI3 Perovskite Solar Cells

Yong Zhang et al.

Summary: In this study, n-propylammonium chloride (PACl) is proposed as an alternative to methylammonium chloride (MACl) to improve the stability and efficiency of FAPbI(3)-based perovskite solar cells. The addition of PACl increases perovskite grain size and significantly prolongs carrier lifetime. Compared to MACl, the PACl additive leads to better stability against moisture due to the in situ formed barrier at the bulk perovskite.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Dimensional Inorganic Tin Perovskite Solar Cells Prepared by Templated Growth

Hansheng Li et al.

Summary: Manipulating dimensionality and nanostructures based on precise control of crystal growth kinetics boosts the development of perovskite optoelectronic materials and devices. Here, a low-dimensional inorganic tin halide perovskite, CsSnBrI2-x(SCN)(x), with a mixed 2D and 3D structure is fabricated, showing superior performance and high power conversion efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Physical

Lead-free tin perovskite solar cells

Tianhao Wu et al.

Summary: Efficient and stable development of lead-free perovskite solar cells (PSCs) using tin as a promising candidate for high-performance, eco-friendly photovoltaic technology has been reviewed. Approaches toward efficiency improvement and challenges in reaching higher PCE and scalable production for tin PSCs have been discussed in this paper with the goal of accelerating their commercialization.

JOULE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Tin(II) Acetylacetonate as a New Type of Tin Compensator Additive for Tin-Based Perovskite Solar Cells

Feidan Gu et al.

Summary: Introducing a new tin compensator Sn (acac) (2) to improve the performance of tin-based perovskite solar cells and increase the maximum power conversion efficiency. In addition to compensating tin, the organic ligand acac (-) can also promote the crystallization process of perovskites.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The Trapped Charges at Grain Boundaries in Perovskite Solar Cells

Pengcheng Jia et al.

Summary: The performance of perovskite solar cells is greatly influenced by the crystallization of the perovskite active layer, with neatly arranged crystal grains promoting less residual charge and improved device performance. The testing of residual charge at grain boundaries provides insight into carrier trap and detrap characteristics in photovoltaic devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interface Energy-Level Management toward Efficient Tin Perovskite Solar Cells with Hole-Transport-Layer-Free Structure

Xiao Liu et al.

Summary: Lead-free tin perovskite solar cells with an optimized design can achieve high efficiency without an organic hole transport layer, and exhibit high stability, laying the foundation for the development of future high-performance and eco-friendly photovoltaic technology.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Heterogeneous 2D/3D Tin-Halides Perovskite Solar Cells with Certified Conversion Efficiency Breaking 14%

Bin-Bin Yu et al.

Summary: By modulating the microstructure of 2D/3D heterogeneous tin-perovskite absorber films through substituting FAI with FPEABr, the oxidation of Sn2+ to Sn4+ and defect density were effectively suppressed, leading to a remarkable increase in conversion efficiency from 9.38% to 14.81%.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Ionic Liquid Stabilizing High-Efficiency Tin Halide Perovskite Solar Cells

Guixiang Li et al.

Summary: The use of n-butylammonium acetate (BAAc) to modulate tin coordination in the crystallization process results in more compact and preferentially oriented perovskite films. Perovskite solar cells processed with BAAc show higher power conversion efficiency and improved stability, paving the way for controlled tin-based perovskite crystallization in lead-free photovoltaics.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Stable tin perovskite solar cells developed via additive engineering

Zhensheng Dai et al.

Summary: This study introduces a new process using tin(II) acetate to improve the crystallinity and stability of tin perovskite solar cells, resulting in better charge extraction and reduced defects. The developed device shows a higher external quantum efficiency for charge extraction compared to control devices, achieving a power conversion efficiency of 9.93% and maintaining over 90% of its initial efficiency after 1000 hours of operation under standard AM 1.5G solar illumination.

SCIENCE CHINA-MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Challenges in tin perovskite solar cells

Mahmoud Aldamasy et al.

Summary: Perovskite solar cells with high efficiency are facing challenges due to lead toxicity. Tin-based perovskites offer a safe alternative, but efficiency needs improvement for commercial viability.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in tin-based perovskite solar cells

Jiupeng Cao et al.

Summary: Organic-inorganic halide perovskite solar cells have shown high efficiency, but many contain toxic lead. Tin-based perovskites are a promising alternative, with the highest efficiency over 13%. This review discusses device design, physical properties, challenges, film preparation techniques, and chemical substitutions to improve the optoelectronic properties of tin-based perovskites and reduce lead content for high-performance and environmentally friendly PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Tin Halide Perovskites: Progress and Challenges

Wen-Fan Yang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tin and Mixed Lead-Tin Halide Perovskite Solar Cells: Progress and their Application in Tandem Solar Cells

Shuai Gu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable tin perovskite solar cells enabled by amorphous-polycrystalline structure

Xiao Liu et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Perovskite-Based Tandem Solar Cells: Get the Most Out of the Sun

Zhihao Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Lead-free tin-halide perovskite solar cells with 13% efficiency

Kohei Nishimura et al.

NANO ENERGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced performance of tin halide perovskite solar cells by addition of hydrazine monohydrobromide

Dongdong Wu et al.

ORGANIC ELECTRONICS (2020)

Add to Collection

Article Multidisciplinary Sciences

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Amran Al-Ashouri et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Templated growth of FASnI3 crystals for efficient tin perovskite solar cells

Xiao Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrafast laser-annealing of perovskite films for efficient perovskite solar cells

Peng You et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

2D-3D Mixed Organic-Inorganic Perovskite Layers for Solar Cells with Enhanced Efficiency and Stability Induced by n-Propylammonium Iodide Additives

Disheng Yao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Antioxidant Grain Passivation for Air-Stable Tin-Based Perovskite Solar Cells

Qidong Tai et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Interface Engineering in Tin Perovskite Solar Cells

Weiyin Gao et al.

ADVANCED MATERIALS INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Hole Transportation for Inverted Tin-Based Perovskite Solar Cells with High Performance and Stability

Cong Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Conjugated Organic Cations Enable Efficient Self-Healing FASnI3 Solar Cells

Chenxin Ran et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells

Efat Jokar et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

The Effects of Doping Density and Temperature on the Optoelectronic Properties of Formamidinium Tin Triiodide Thin Films

Rebecca L. Milot et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Passivation in perovskite solar cells: A review

Pengjun Zhao et al.

MATERIALS TODAY ENERGY (2018)

Add to Collection

Review Chemistry, Physical

A critical review on tin halide perovskite solar cells

Maria Konstantakou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Optical Properties of Photovoltaic Organic-Inorganic Lead Halide Perovskites

Martin A. Green et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells

Giles E. Eperon et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.