Related references
Note: Only part of the references are listed.A viscoelastic-viscoplastic constitutive model and its finite element implementation of amorphous polymers
Zhihong Liang et al.
POLYMER TESTING (2023)
Fractional modeling of temperature-dependent mechanical behaviors for glassy polymers
Wei Cai et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
A thermodynamically-based constitutive theory for amorphous glassy polymers at finite deformations
Tianxiang Lan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Temperature Dependent Dynamic Strain Localization and Failure of Ductile Polymeric Rods under Large Deformation
Longhui Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Constitutive modeling of the rate- and temperature-dependent macro-yield behavior of amorphous glassy polymers
Chengkai Jiang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Modelling strain rate and temperature dependent mechanical response of PMMAs at large deformation from below to above Tg
C. E. Federico et al.
POLYMER (2020)
Plasticity and thermally-induced recovery in polycarbonate
Mohammed Nadhir D. Cherief et al.
MECHANICS OF MATERIALS (2020)
A hygro-thermo-mechanical constitutive model for hygrothermally activated shape memory polymers under finite deformations
Jianping Gu et al.
MECHANICS OF MATERIALS (2020)
Experimental and numerical investigation on shear banding during nanomachining of an amorphous glassy polymer
Fengzhen Sun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Mechanical behavior of liquid nitrile rubber-modified epoxy resin: Experiments, constitutive model and application
Xiao Xu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
A constitutive model for strain hardening behavior of predeformed amorphous polymers: Incorporating dissipative dynamics of molecular orientation
Rui Xiao et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers
J. Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Establishment and comparison of four constitutive relationships of PC/ABS from low to high uniaxial strain rates
Haitao Wang et al.
MECHANICS OF TIME-DEPENDENT MATERIALS (2018)
Symmetric split Hopkinson compression and tension tests using synchronized electromagnetic stress pulse generators
Nie Hailiang et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Constitutive modeling of polycarbonate over a wide range of strain rates and temperatures
Haitao Wang et al.
MECHANICS OF TIME-DEPENDENT MATERIALS (2017)
An internal state variable thermodynamic model for determining the Taylor-Quinney coefficient of glassy polymers
Guojian Shao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
A finite deformation fractional viscoplastic model for the glass transition behavior of amorphous polymers
Rui Xiao et al.
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2017)
A finite strain thermodynamically-based constitutive framework coupling viscoelasticity and viscoplasticity with application to glassy polymers
Muralidhar Reddy Gudimetla et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
The effect of heat developed during high strain rate deformation on the constitutive modeling of amorphous polymers
Keivan H. Safari et al.
MECHANICS OF TIME-DEPENDENT MATERIALS (2016)
Determination of dynamic elastic modulus of polymeric materials using vertical split Hopkinson pressure bar
Ying-Gang Miao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
A Macro-Damaged Viscoelastoplastic Model for Thermomechanical and Rate-Dependent Behavior of Glassy Polymers
Peng Yu et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2016)
Rate-dependent compressive behavior of EPDM insulation: Experimental and constitutive analysis
Jing Jiang et al.
MECHANICS OF MATERIALS (2016)
Fitting stress relaxation experiments with fractional Zener model to predict high frequency moduli of polymeric acoustic foams
Xinxin Guo et al.
MECHANICS OF TIME-DEPENDENT MATERIALS (2016)
Experimental and modeling study of the compressive behavior of PC/ABS at low, moderate and high strain rates
Haitao Wang et al.
POLYMER TESTING (2016)
Experimental investigation and modeling of the mechanical behavior of PC/ABS during monotonic and cyclic loading
Haitao Wang et al.
POLYMER TESTING (2016)
A damage-based elastic-viscoplastic constitutive model for amorphous glassy polycarbonate polymers
Jun Wang et al.
MATERIALS & DESIGN (2016)
Mechanical impact behavior of polyether-ether-ketone (PEEK)
D. Garcia-Gonzalez et al.
COMPOSITE STRUCTURES (2015)
Implicit implementation and consistent tangent modulus of a viscoplastic model for polymers
Nadia Achour et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Parametric identification for material of viscoelastic SHPB from wave propagation data incorporating geometrical effects
H. S. U. Butt et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Molecular chain plasticity model similar to crystal plasticity theory based on change in local free volume and FE simulation of glassy polymer
H. Nada et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model
Jun Wang et al.
COMPOSITE STRUCTURES (2014)
A visco-elastoplastic constitutive model for large deformation response of polycarbonate over a wide range of strain rates and temperatures
Peng Yu et al.
POLYMER (2014)
An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation
J. L. Bouvard et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Constitutive modeling of polycarbonate during high strain rate deformation
Keivan H. Safari et al.
POLYMER ENGINEERING AND SCIENCE (2013)
An analysis of stress uniformity for concrete-like specimens during SHPB tests
Jue Zhu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)
A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation
Lallit Anand et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Constitutive equations for thermomechanical deformations of glassy polymers
A. G. Varghese et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates
J. Richeton et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates
AD Mulliken et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Mechanical behavior of polymethylmethacrylate with molecules oriented via simple shear
JI Weon et al.
POLYMER ENGINEERING AND SCIENCE (2005)
Impact behavior and modeling of engineering polymers
Y Duan et al.
POLYMER ENGINEERING AND SCIENCE (2003)
Development of molecular orientation and stress in biaxially deformed polymers. I. Affine deformation in a solid state
L Jarecki et al.
POLYMER (2002)
Analysis of multiaxial impact behavior of polymers
Y Duan et al.
POLYMER ENGINEERING AND SCIENCE (2002)
A uniform phenomenological constitutive model for glassy and semicrystalline polymers
Y Duan et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Deformation of thermoplastic vulcanizates
MC Boyce et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Large strain time-dependent behavior of filled elastomers
JS Bergström et al.
MECHANICS OF MATERIALS (2000)
Constitutive modelling of deformation behavior of glassy polymers and applications
Y Tomita
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2000)
Constitutive model for the finite deformation stress-strain behavior of poly(ethylene terephthalate) above the glass transition
MC Boyce et al.
POLYMER (2000)