☆ 4.7 Article

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Temporal convolutional networks for data-driven thermal modeling of directed energy deposition

V. Perumal et al.

Summary: Metal additive manufacturing (AM) involves complex multiscale and multiphysics processes. Deep learning-based approaches, specifically temporal convolutional networks (TCNs), have been proposed as a solution to the challenges faced by physics-based modeling methods in predicting thermal histories in AM. This study presents the use of TCNs for fast inferencing in directed energy deposition (DED) processes, achieving comparable accuracy to other deep learning methods with significantly reduced compute and training times.

JOURNAL OF MANUFACTURING PROCESSES (2023)

Add to Collection

Article Materials Science, Multidisciplinary

A physics-informed machine learning method for predicting grain structure characteristics in directed energy deposition

Dmitriy Kats et al.

Summary: The study presents a physics-informed machine learning algorithm to predict grain structure in DED process, using experimentally validated cellular automaton finite volume method for training data generation. The proposed method efficiently captures the desired microstructure characteristics through governing physics-based approach.

COMPUTATIONAL MATERIALS SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Coupling between inherent and machining-induced residual stresses in aluminum components

Ritin Mathews et al.

Summary: This study investigates the coupling of inherent residual stress and machining-induced residual stress on the final-state of residual stress and distortion during high-speed machining of high aspect-ratio aluminum components. The results show that the interaction between IRS and MIRS is nonlinear in nature, varies according to the component and location of stress, and significantly influences the final part distortion.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Chemical

The influence of nozzle geometry on powder flow behaviors in directed energy deposition additive manufacturing

X. Gao et al.

Summary: Computational fluid dynamics and discrete element methods were used to simulate the interactions between powder particles and gas flows, and experiments were conducted for validation. The influence of nozzle geometries on powder flow behaviors in DED was evaluated using laser irradiation rate and powder aggregation degree. The defined parameters, including powder mass concentration, laser irradiation rate, and powder aggregation degree, can be used for determining the stand-off distance in DED.

ADVANCED POWDER TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Defects and anomalies in powder bed fusion metal additive manufacturing

Amir Mostafaei et al.

Summary: Metal additive manufacturing is a disruptive technology that revolutionizes the manufacturing industry by directly fabricating complex metal parts. However, microstructural defects and anomalies limit its widespread adoption, potentially compromising the structural integrity and performance of the products. This review aims to explore the common defects/anomalies and their formation mechanisms in powder bed fusion processes, as well as propose practical strategies for mitigating these issues.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2022)

Add to Collection

Article Automation & Control Systems

Experimental studies on fabricating functionally gradient material of stainless steel 316L-Inconel 718 through hybrid manufacturing: directed energy deposition and machining

Runyu Zhang et al.

Summary: This study investigates the fabrication of functionally gradient materials (FGMs) using hybrid manufacturing (DED and machining) and provides valuable experimental data for machining SS316/In718 FGM. The study reveals that the heterogeneous mechanical properties in FGM due to different materials greatly influence cutting mechanism.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Automation & Control Systems

Multiphysics modeling of in situ integration of directed energy deposition with ultrasonic nanocrystal surface modification

Kishore Mysore Nagaraja et al.

Summary: This paper presents an in situ integration of laser-assisted powder-based DED process with ultrasonic nanocrystal surface modification to improve the quality of the built part. The multiphysics computational approach shows that the integration process can introduce compressive residual stress and shift tensile stress to compressive stress, improving the quality of the built part.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Heat Source Modeling and Residual Stress Analysis for Metal Directed Energy Deposition Additive Manufacturing

Abhilash Kiran et al.

Summary: The development of simplified tools for additive manufacturing research is encouraged by advancements in the field. This study evaluated a simplified heat source model called concentrated heat source for directed energy deposition. The model was compared to the widely accepted Goldak heat source model and showed good agreement in terms of melt pool shape and temperature contour. Additionally, the concentrated heat source model reported faster computational time and was validated for thermo-mechanical simulation of 3D solid structures.

MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

An enhanced finite element modelling based on self-regulation effect in directed energy deposition of Ti-6Al-4V

Bo Yao et al.

Summary: In laser blown powder directed energy deposition (DED), the self-regulation effect (SRE) is a unique phenomenon that compensates for the sloping deposition surface induced by process fluctuations or part warpage. Previous numerical studies on DED have overlooked the variable layer thickness and the credibility of simulations. In this study, an improved modeling process considering SRE is proposed, and experimental measurements are used to quantify the relationship between layer thickness and powder standoff distance (PSD) and inter-layer temperature (ILT). Two thermo-mechanical finite element (FE) models are established to examine the proposed modeling strategy, and the results demonstrate that the model with SRE significantly improves the mechanical and geometric predictions of DED parts.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

Multi-Fidelity Surrogate-Based Process Mapping with Uncertainty Quantification in Laser Directed Energy Deposition

Nandana Menon et al.

Summary: This paper presents the use of multi-fidelity surrogate models for designing temporal process maps in laser directed energy deposition additive manufacturing. The results demonstrate the capability of blending different fidelity models to accurately predict process parameters and melt pool depth, while minimizing computational costs. The study also shows the successful implementation of temporal forward and inverse process maps, incorporating uncertainty quantification.

MATERIALS (2022)

Add to Collection

Review Engineering, Aerospace

A review of topology optimization for additive manufacturing: Status and challenges

Jihong Zhu et al.

Summary: The integration of topology optimization and additive manufacturing shows promising application prospects in modern manufacturing, with significant progress in multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanistic models for additive manufacturing of metallic components

H. L. Wei et al.

Summary: This article discusses the application of additive manufacturing (AM) in the manufacturing of metallic components, focusing on the factors that affect the microstructure, properties, and defects of components and the corresponding model predictions. The critical review of the application of transport phenomena models in AM studies is provided, and opportunities for future research are identified.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A coupled fluid-mechanical workflow to simulate the directed energy deposition additive manufacturing process

Lauren L. Beghini et al.

Summary: This study presents a new simulation workflow that integrates solid mechanics and fluid mechanics to simulate DED additive manufacturing processes using the SIERRA software package. By combining the thermal history from fluid mechanics with residual stress and material property evolutions from solid mechanics, additional fidelity and precision are incorporated into additive manufacturing process simulations, providing new insights.

COMPUTATIONAL MECHANICS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Metal additive manufacturing in aerospace: A review

Byron Blakey-Milner et al.

Summary: Metal additive manufacturing in aerospace industry offers significant opportunities for cost reduction, material innovation, design flexibility, and lightweighting. The technology not only enhances performance but also simplifies design and manufacturing processes.

MATERIALS & DESIGN (2021)

Add to Collection

Article Thermodynamics

Numerical investigation on heat transfer of melt pool and clad generation in directed energy deposition of stainless steel

Y. M. Zhang et al.

Summary: The directed energy deposition (DED) process is widely used in the additive manufacturing industry due to its advantages in rapid production of complex metallic parts and efficient cladding. A computational fluid dynamics model is proposed in this study to simulate melt pool generation and clad formation, evaluating the effect of surface active element-sulfur content on melt pool dynamics. Investigations on thermal evolutions of melt pool and solidification of the clad are systematically conducted to ensure accuracy and reliability of the proposed model.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Review Engineering, Manufacturing

A thermal fluid mechanical model of stress evolution for wire feeding-based laser additive manufacturing

Lvjie Liang et al.

Summary: A novel coupled thermal fluid mechanical model was proposed in this paper to analyze stress and deformation in large-scale structures. By combining computational fluid dynamics and finite element method models, a more accurate temperature field was obtained, and the influence of shape on stress could be considered.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

Zhihua Tian et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Machine Learning in Additive Manufacturing: A Review

Lingbin Meng et al.

JOM (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components

Xu Song et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High-fidelity modelling of thermal stress for additive manufacturing by linking thermal-fluid and mechanical models

Fan Chen et al.

MATERIALS & DESIGN (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Machine Learning for Advanced Additive Manufacturing

Zeqing Jin et al.

MATTER (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Powder bed fusion additive layer manufacturing of titanium alloys

Hossein Eskandari Sabzi

MATERIALS SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A thermo-metallurgical-mechanical model for selective laser melting of Ti6Al4V

Pengfei Tan et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Laser Powder Bed Fusion of Stainless Steel Grades: A Review

Chiara Zitelli et al.

METALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design

Adrita Dass et al.

COATINGS (2019)

Add to Collection

Article Physics, Condensed Matter

MPISI: The neutron strain scanner materials probe for internal strain investigations at the SAFARI-1 research reactor

Andrew M. Venter et al.

PHYSICA B-CONDENSED MATTER (2018)

Add to Collection

Article Engineering, Industrial

Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts

Imade Koutiri et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

Chu Lun Alex Leung et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Meso-scale modeling of multiple-layer fabrication process in Selective Electron Beam Melting: Inter-layer/track voids formation

Wentao Yan et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Thermodynamics

Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron

Zhengtao Gan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Engineering, Industrial

Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses

Neil S. Bailey et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Experimental measurement of residual stress and distortion in additively manufactured stainless steel components with various dimensions

M. Ghasri-Khouzani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

An improved prediction of residual stresses and distortion in additive manufacturing

T. Mukherjee et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

LASER POWDER BED FUSION OF ALUMINUM ALLOYS

Diego Manfredi et al.

ACTA METALLURGICA SLOVACA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal metallurgical analysis of GMA welded AH36 steel using CFD-FEM framework

Jason Cheon et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue crack propagation behaviour in wire plus arc additive manufactured Ti-6Al-4V: Effects of microstructure and residual stress

Jikui Zhang et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering

L. M. Sochalski-Kolbus et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)

Add to Collection

Review Engineering, Aerospace

The present and future of additive manufacturing in the aerospace sector: A review of important aspects

Adrian Uriondo et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2015)

Add to Collection

Article Thermodynamics

A simulation study on the multi-pass rolling bond of 316L/Q345R stainless clad plate

Qin Qin et al.

ADVANCES IN MECHANICAL ENGINEERING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process

V. Manvatkar et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Optics

An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser

Parisa Farahmand et al.

OPTICS AND LASER TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Heat transfer and fluid flow in additive manufacturing

A. Raghavan et al.

JOURNAL OF LASER APPLICATIONS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Fundamental consolidation mechanisms during selective beam melting of powders

Carolin Koerner et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting

Ahmed Hussein et al.

MATERIALS & DESIGN (2013)

Add to Collection

Review Materials Science, Multidisciplinary

Laser additive manufacturing of metallic components: materials, processes and mechanisms

D. D. Gu et al.

INTERNATIONAL MATERIALS REVIEWS (2012)

Add to Collection

Article Thermodynamics

Modeling of coaxial powder flow for the laser direct deposition process

S. Y. Wen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Physics, Applied

Transport phenomena during direct metal deposition

X. He et al.

JOURNAL OF APPLIED PHYSICS (2007)

Add to Collection

Article Engineering, Manufacturing

Process maps for predicting residual stress and melt pool size in the laser-based fabrication of thin-walled structures

Aditad Vasinonta et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Residual stresses in LENS® components using neutron diffraction and contour method

P Rangaswamy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Add to Collection

Article Engineering, Manufacturing

Modelling of material flow stress in chip formation process from orthogonal milling and split Hopkinson bar tests

H Chandrasekaran et al.

MACHINING SCIENCE AND TECHNOLOGY (2005)

Add to Collection

Article Engineering, Mechanical

The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints

G Bussu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2003)

Add to Collection

Article Engineering, Electrical & Electronic

Scattered data interpolation methods for electronic imaging systems: a survey

I Amidror

JOURNAL OF ELECTRONIC IMAGING (2002)

Add to Collection

Review Thermodynamics

Finite element modeling and simulation of welding part 1: Increased complexity

LE Lindgren

JOURNAL OF THERMAL STRESSES (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.