☆ 4.7 Article

Surface morphology evolution mechanisms of laser polishing in ambient gas

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Article Optics

Optimization of processing parameters for pulsed laser welding of dissimilar metal interconnects

Nguyen Thi Tien et al.

Summary: An experimental and numerical study is conducted to optimize the processing parameters for the fabrication of dissimilar lap joints between aluminum and copper using a pulsed laser welding (PLW) method with a wobble strategy. The study applies a circle packing design algorithm to select representative combinations of laser power and welding speed, which are then used in a computational fluidic dynamics (CFD) model to predict the weld pool geometry and copper concentration. The results are used to construct processing maps and determine the parameters that produce high-quality dissimilar joints.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Review Automation & Control Systems

Laser polishing: a review of a constantly growing technology in the surface finishing of components made by additive manufacturing

Gisario Annamaria et al.

Summary: Additive manufacturing is an advanced production technology that has greatly contributed to the rapid replacement of complex-shaped components on the market. However, the post-processing phase of additive technology, especially the finishing process, needs to be automated and scalable. Laser polishing, as an emerging post-processing technology, is becoming increasingly popular in the manufacturing field as a valid alternative to conventional technologies for surface finishing of metal components obtained through additive processes.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Thermodynamics

Effect of radiative heat transfer on thermal-solutal Marangoni convection in a shallow rectangular cavity with mutually perpendicular temperature and concentration gradients

Jian-Gao Zhang et al.

Summary: The three-dimensional numerical simulations revealed that the contributions of thermal and solutal Marangoni flows were similar under different ambient temperature conditions. Additionally, the intensity of the thermal Marangoni effect decreased first and then increased with an increase in ambient temperature. The flow stability was lost when the Marangoni number exceeded a critical value, and different oscillatory flow patterns were observed under the influence of thermal radiation.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Study on the Influence of Capillary Force and Thermal Capillary Force on Surface Bulge Morphology by Laser Micro-Melting

Xiping Yang et al.

Summary: The study establishes a laser micro-melting model, taking into account the effects of boundary heat transfer, recoil pressure, surface tension, capillary force, and thermal capillary force on micro-flow. It reveals that the height variation of the morphology bulge is mainly caused by recoil pressure and capillary force. It shows that in the heating stage, molten metal flow is dominated by capillary force and thermal capillary force, while in the cooling stage, the capillary force is the main driving force for metal flow, gradually converging from both sides to the middle.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Approaches to Sustainability in Chemical Mechanical Polishing (CMP): A Review

Hyunseop Lee et al.

Summary: This study reviews the importance of CMP in semiconductor manufacturing, its impact on the environment, methods to reduce environmental burden, and the future direction of CMP technology for sustainability.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

High-temperature oxidation behaviour of nanostructure surface layered austenitic stainless steel

Digvijay Singh et al.

Summary: This study investigates the high-temperature oxidation behavior of nanostructure surface layered AISI 304L stainless steel. The results show that the surface mechanical attrition treatment (SMAT) process can lead to the formation of a stable and protective oxide scale with better adhesion and higher density.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Review Automation & Control Systems

Polishing of additive manufactured metallic components: retrospect on existing methods and future prospects

Jibin Boban et al.

Summary: Additive manufacturing is an advanced manufacturing technology that can create complex shaped products from a digital 3D design. Metal additive manufacturing has gained attention due to the increasing demand for complex and customized metallic parts in various industries. However, the surface integrity and dimensional accuracy of the parts produced by metal additive manufacturing need improvement. Researchers have introduced several post-processing methods to overcome these issues. This review provides a comprehensive outlook on these methods, their outcomes in terms of surface modification, and discusses the future research path in the field of post-processing metallic additive manufacturing components, with a focus on automation using machine learning and artificial intelligence.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Optics

Research on the formation mechanism of the surface structure in transition regime of laser polishing 304 stainless steel

Jilin Xu et al.

Summary: This paper investigates the formation mechanism of a new type of surface structure that has not been previously studied in laser polishing. The study presents the complete evolution of the surface profile and size parameters of the surface structure through laser polishing experiments and establishes a numerical model to further explore the formation mechanism. The contribution of multiple factors to the formation of the surface structure is analyzed and the simulated results agree well with the experimental results, enhancing the theory of laser polishing.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Automation & Control Systems

Finite element simulation and experimental study of single-laser track in laser polishing of Ti6Al4V

Jiejing Li et al.

Summary: This paper developed a three-dimensional transient finite element model describing the distribution of temperature and stress field in single-laser scanning, as well as predicting the molten pool width. The study provides a basis for optimizing and improving surface laser polishing technology.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Investigation on the mechanism of a new laser surface structuring by laser remelting

Jilin Xu et al.

Summary: A new method of surface structuring by laser remelting using surface tension and volume expansion was proposed. A numerical model was developed to investigate the formation mechanism and factors influencing the surface structure, and experiments were conducted to verify the effectiveness of the model.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Mechanics

An improved recoil pressure boundary condition for the simulation of deep penetration laser beam welding using the SPH method

Daniel Sollich et al.

Summary: In this study, deep penetration laser beam welding was simulated using the SPH method. The simulation considered various physical phenomena such as elastic material behavior, fluid dynamics, heat transfer, and phase transitions. A ray-tracing scheme was used to determine the energy input of the laser beam, and an improved recoil pressure model was introduced. Two boundary conditions were validated using simple examples, and the results showed that recoil pressure plays a key role in the formation of deep capillaries and the acceleration of the surrounding melt.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2022)

Add to Collection

Article Optics

Influence of assist gas on surface quality and microstructure development of laser metal processing

Li Xing et al.

Summary: The study investigated the effect of changing the assist gas on nanosecond laser engraving of Cr12MoV mold steel, and found that the use of oxygen gas during rough engraving increased the efficiency, while Argon gas at final engraving steps improved the quality of the engraved surface. Results also showed that the exothermal chemical reactions significantly increased the efficiency of laser engraving, but deteriorated the surface quality and promoted the detachment of elements C and Cr in the remelting layer.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Research on ultrasonic vibration-assisted laser polishing of the 304 stainless steel

Di Kang et al.

Summary: This paper investigates the application of ultrasonic vibration-assisted laser polishing on the surface of 304 stainless steel. By adjusting the amplitude and frequency, intermittent polishing process can be achieved, allowing for precise adjustment of laser energy density for even heating of micro peaks and valleys on the surface. Experimental studies on the effects of amplitude, scanning speed, laser power, and focus offset were conducted to optimize the UVLP processing of 304 stainless steel, showing superior polishing effects compared to traditional laser polishing.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Manufacturing

Numerical simulation of the melting and alloying processes of elemental titanium and boron powders using selective laser alloying

Wenlin Ye et al.

Summary: This paper investigates the joint effects of selective laser melting and chemical reactions in the selective laser alloying process through numerical simulation, providing detailed information about the molten pool. The study shows that the heat released from the exothermic reaction is an important energy source that can improve manufacturing efficiency, while the evaporation latent heat significantly influences the temperature field.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Chemistry, Physical

Pulsed laser polishing of selective laser melted aluminium alloy parts

Debajyoti Bhaduri et al.

Summary: A novel LP strategy was proposed to improve the re-melting of aluminium alloys by introducing a thermally insulating ceramic baseplate, resulting in significant reductions in surface roughness and residual stresses. The study highlights the importance of controlling heat dissipation in laser polishing of thermally conductive materials to achieve desired surface integrity properties.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Optics

Study on the mechanism of surface topography evolution in melting and transition regimes of laser polishing

Jilin Xu et al.

Summary: This paper presents a numerical model for investigating the melting and transition regimes of laser polishing, revealing the effects of surface forces, fluid velocity, and material removal on surface topography evolution, as well as analyzing the reasons for the formation of bulge structures and the impact of laser power. The model also attempts to predict surface roughness after laser polishing, with a maximum error of 14.9% compared to experimental results, indicating its potential for optimizing process parameters.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Theoretical and experimental study of bulge formation in laser polishing of 304 stainless steel

Jilin Xu et al.

Summary: This study reveals the formation mechanism of bulges in laser polishing through experiments and numerical modeling. By analyzing surface forces and velocities, the main driving force for bulge formation was identified as the thermocapillary force affected by surface-active elements. Measures to reduce or eliminate bulges were proposed to enhance the surface finish of laser polishing. The developed model can accurately predict the evolution of surface topography in laser polishing, guiding the optimization of process parameters.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of rare earth elements on high temperature oxidation behaviour of austenitic steel

Zhibin Zheng et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Coatings & Films

Direct laser hardening of AISI 1020 steel under controlled gas atmosphere

Niroj Maharjan et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11

A. Temmler et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of metal mixing in laser keyhole welding of dissimilar metals

Wenkang Huang et al.

MATERIALS & DESIGN (2020)

Add to Collection

Review Engineering, Industrial

Advances in polishing of optical freeform surfaces: A review

Zebin Xia et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Influence of global and local process gas shielding on surface topography in laser micro polishing (LμP) of stainless steel 410

A. Temmler et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

Numerical simulation and experimental study on laser micromachining of 304L stainless steel in ambient air

Ninghui Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Initial Surface Features on Laser Polishing of Co-Cr-Mo Alloy Made by Powder-Bed Fusion

B. Richter et al.

JOM (2019)

Add to Collection

Article Thermodynamics

Lattice Boltzmann Simulations for Melting and Resolidification of Ultrashort Laser Interaction with Thin Gold Film

Ling Li et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2018)

Add to Collection

Article Optics

Fundamental study of the bulge structure generated in laser polishing process

Chen Chen et al.

OPTICS AND LASERS IN ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Decarburization during laser surface processing of steel

Niroj Maharjan et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)

Add to Collection

Article Thermodynamics

Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing

Zhengtao Gan et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron

Zhengtao Gan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Forming Mechanism of Bump Shape in Pulsed Laser Melting of Stainless Steel

Hong Shen et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Surface structuring by laser remelting of metals

A. Temmler et al.

JOURNAL OF LASER APPLICATIONS (2017)

Add to Collection

Article Engineering, Manufacturing

Role of Capillary and Thermocapillary Forces in Laser Polishing of Metals

Chi Zhang et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Chemistry, Physical

Influence of Lorentz forces on nanofluid forced convection considering Marangoni convection

M. Sheikholeslami et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Optics

Optofluidic lens actuated by laser-induced solutocapillary forces

A. Yu. Malyuk et al.

OPTICS COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Laser polishing of 3D printed mesoscale components

Debajyoti Bhaduri et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Droplet formation caused by laser-induced surface-tension-driven flows in binary liquid mixtures

Ksenia A. Tatosova et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)

Add to Collection

Article Geochemistry & Geophysics

Experimental determination of oxygen diffusion in liquid iron at high pressure

Esther S. Posner et al.

EARTH AND PLANETARY SCIENCE LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Process- and Material-Induced Surface Structures During Laser Polishing

Christian Nuesser et al.

ADVANCED ENGINEERING MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Laser-induced capillary effect in thin layers of water-alcohol mixtures

Natalia A. Ivanova et al.

EUROPEAN PHYSICAL JOURNAL E (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Thermodynamic Laws of the Oxygen Solubility in Liquid Metals (Ni, Co, Fe, Mn, Cr) and the Formation of Oxygen-Containing Solutions in the Alloys Based on Them

S. N. Paderin et al.

RUSSIAN METALLURGY (2015)

Add to Collection

Proceedings Paper Engineering, Industrial

Ti surface laser polishing: effect of laser path and assist gas

L. Giorleo et al.

9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14 (2015)

Add to Collection

Article Chemistry, Physical

Surface oxidation phenomenon and mechanism of AISI 304 stainless steel induced by Nd:YAG pulsed laser

C. Y. Cui et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Thermodynamics

LASER IGNITION OF BULK IRON, MILD STEEL, AND STAINLESS STEEL IN OXYGEN ATMOSPHERES

Maryse Muller et al.

COMBUSTION SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Engineering, Mechanical

Influence of laser polishing in an inert atmosphere on the high cycle fatigue strength of AISI 1045 steel

R. Aviles et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

Add to Collection

Article Engineering, Manufacturing

Analytical and Experimental Investigation of Thermocapillary Flow in Pulsed Laser Micropolishing

Chao Ma et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2014)

Add to Collection

Article Engineering, Manufacturing

Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V

Chao Ma et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)

Add to Collection

Article Thermodynamics

Laser heating of titanium and steel: Phase change at the surface

O. Momin et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

Add to Collection

Article Engineering, Mechanical

Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel

R. Aviles et al.

INTERNATIONAL JOURNAL OF FATIGUE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of oxygen on transitional Marangoni flow in laser spot welding

C. X. Zhao et al.

ACTA MATERIALIA (2010)

Add to Collection

Article Optics

Technology of Polishing of Titanium Surface Using the Fiber-Laser Radiation

V. M. Yermachenko et al.

LASER PHYSICS (2010)

Add to Collection

Article Physics, Applied

Laser-oxygen cutting of mild steel: the thermodynamics of the oxidation reaction

J. Powell et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2009)

Add to Collection

Article Engineering, Manufacturing

Pulsed laser polishing of micro-milled Ti6Al4V samples

Tyler L. Perry et al.

Journal of Manufacturing Processes (2009)

Add to Collection

Article Materials Science, Coatings & Films

Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates

H. Li et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Surface tension of liquid Fe-Cr-O alloys at 1823 K

J Lee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Active solute effects on surface ripples in electron-beam welding solidification

PS Wei et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)

Add to Collection

Article Physics, Applied

Heat transfer and fluid flow during laser spot welding of 304 stainless steel

X He et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2003)

Add to Collection

Article Physics, Applied

Modeling of heat transfer and fluid flow during gas tungsten arc spot welding of low carbon steel

W Zhang et al.

JOURNAL OF APPLIED PHYSICS (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Marangoni convection driven by thermocapillary and solutocapillary forces in the Fe-O alloy pool during the solidification or remelting process

K Nakajima et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.