☆ 4.7 Article

Mechanisms of tool-workpiece interaction in ultraprecision diamond turning of single-crystal SiC for curved microstructures

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Manufacturing

Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review

Weihai Huang et al.

Summary: Brittle materials are widely used in optics, optoelectronics, and semiconductors. Ultraprecision machining of brittle materials can improve their functional performance and lifespan. This paper provides a comprehensive overview of recent advances in ultraprecision machining of soft-brittle materials, comparing different machining methods and analyzing their effects on tool-workpiece interactions. The paper also identifies challenges in engineering applications and provides solutions and guidelines for future research and development.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2023)

Add to Collection

Article Engineering, Mechanical

Brittle-ductile transition behavior of 6H-SiC in oblique diamond cutting

Shuo Zhang et al.

Summary: In this work, a novel machining method named oblique diamond cutting is used to improve the brittle-ductile transition behavior of 6H-SiC. The tool edge ovalization effect is proposed to provide insight into the change in cutting edge shape. Experimental results and finite element simulation indicate that oblique diamond cutting significantly increases the brittle-ductile transition depth.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

Molecular simulation of the plastic deformation and crack formation in single grit grinding of 4H-SiC single crystal

Shang Gao et al.

Summary: This work investigated the deformation and crack formation of monocrystalline 4H-SiC involved in single grit grinding using molecular dynamics (MD) simulation. The mechanism for crack initiation and propagation in mono-crystalline 4H-SiC was revealed for the first time. Stress analysis demonstrated the driving forces and propagation directions of the cracks.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

On the deformation mechanism of SiC under nano-scratching: An experimental investigation

Jiahao Hu et al.

Summary: This study aims to clarify the deformation mechanisms of SiC subjected to single-point cutting. Experimental investigations revealed that under nano-scratching load and depth conditions consistent with molecular dynamics analysis, material removal in SiC is mainly achieved through amorphous phase transformation.

WEAR (2023)

Add to Collection

Article Chemistry, Physical

Surface deformation, phase transition and dislocation mechanisms of single crystalline 6H-SiC in oblique nano-cutting

Shuo Zhang et al.

Summary: Compared with conventional orthogonal cutting, this study systematically investigates the oblique nano-cutting of 6H-SiC by tilting the tool at different angles through molecular dynamics simulations. The deformation mechanism, surface deformation, and cutting force variation are studied, and the transition path of amorphization is clarified. Dislocation analysis reveals that basal dislocation systems dominate the behavior, while in oblique nano-cutting, the basal 1/3 < 1 (1) over bar 00> Shockley partial dislocation of 6H-SiC is more activated due to the inclined-cutting-edge-derived shear stress.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

Improvement mechanism of brittle-plastic transition and residual stress in scratching 4H-SiC implanted by hydrogen ions

Qiang Kang et al.

Summary: This study examined the mechanism by which ion implantation improves the machining performance of SiC samples and reduces defects. Results show that ion implantation can effectively reduce surface cracks and enhance machining quality.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Physics, Applied

Dislocations in 4H silicon carbide

Jiajun Li et al.

Summary: This topical review provides an introduction to the classification and properties of dislocations in 4H-SiC, as well as their generation, evolution, and elimination processes. The effects of dislocations on the electronic and optical properties of 4H-SiC materials and devices are also discussed, along with insights for further control of dislocations.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2022)

Add to Collection

Article Materials Science, Ceramics

Formation of high density stacking faults in polycrystalline 3C-SiC by vibration-assisted diamond cutting

Liang Zhao et al.

Summary: This study reveals the ductile deformation mechanisms and microstructure evolution of 3C-SiC ceramic material during ultrasonic elliptical vibration-assisted diamond cutting. The formation of highly oriented high density stacking faults, along with suppressed amorphization and cracking, contributes to enhanced ductile material removal. Raman spectroscopy, transmission electron microscopy, and molecular dynamics simulations are used to elucidate the phase transformation and microstructure evolution mechanisms.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultraprecision tool-servo cutting of pure nickel for fabricating micro/nanostructure arrays

Hanheng Du et al.

Summary: This study proposed an ultraprecision tool-servo cutting process to fabricate micro/nanostructure arrays on nickel surfaces. Micro-lens array and sawtooth-shaped nanostructure array were successfully fabricated with high accuracy. The sawtooth-shaped nanostructure array exhibited structural colors. The proposed cutting process offers a flexible and highly efficient fabrication method for extending the application fields of nickel and its alloy to optics.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Ceramics

Atomistic origin of brittle-to-ductile transition behavior of polycrystalline 3C-SiC in diamond cutting

Liang Zhao et al.

Summary: The machinability of hard brittle polycrystalline ceramic is closely related to its internal microstructures and deformation behavior. The study reveals the mechanisms governing the brittle-to-ductile transition behavior of polycrystalline 3C-SiC in diamond cutting, including dislocation slip, amorphization-dominated ductile deformation, and grain boundaries-mediated brittle fracture. The competitive co-existence of various deformation modes determines the brittle-to-ductile transition behavior in grooving of polycrystalline 3C-SiC.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Industrial

Nanometric cutting mechanism of silicon carbide

Jinshi Wang et al.

Summary: An enhanced molecular dynamics method is proposed to predict and clarify the onset of brittle regime machining in the ultraprecision diamond cutting of silicon carbide, highlighting the importance of dislocation and shear band. Experimental results validate the effectiveness of this modelling approach.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Review Engineering, Manufacturing

Advances in laser assisted machining of hard and brittle materials

Kaiyuan You et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Engineering, Manufacturing

Cutting forces in fast-/slow tool servo diamond turning of micro-structured surfaces

Zhiwei Zhu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Fabrication of infrared hexagonal microlens array by novel diamond turning method and precision glass molding

Lin Zhang et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)

Add to Collection

Article Engineering, Manufacturing

Highly efficient planarization of sliced 4H-SiC (0001) wafer by slurryless electrochemical mechanical polishing

Xu Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)

Add to Collection

Article Engineering, Manufacturing

Brittle-to-ductile transition in elliptical vibration-assisted diamond cutting of reaction-bonded silicon carbide

Junjie Zhang et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

Add to Collection

Article Engineering, Manufacturing

A novel ductile machining model of single-crystal silicon for freeform surfaces with large azimuthal height variation by ultra-precision fly cutting

Zhanwen Sun et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

In situ thermal polymerisation of natural oils as novel sustainable approach in nanographite particle production

Vitaliy Datsyuk et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)

Add to Collection

Article Engineering, Manufacturing

Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo

Mao Mukaida et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Add to Collection

Article Engineering, Biomedical

Nano-scale elastic-plastic properties and indentation-induced deformation of single crystal 4H-SiC

A. Nawaz et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Add to Collection

Article Engineering, Industrial

Micro milling tool made of nano-polycrystalline diamond for precision cutting of SiC

Hirofumi Suzuki et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Physics, Applied

On the phase transformation of single-crystal 4H-SiC during nanoindentation

Mitsuhiro Matsumoto et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Add to Collection

Article Multidisciplinary Sciences

Design methodology for a confocal imaging system using an objective microlens array with an increased working distance

Woojae Choi et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

The mechanism of ductile deformation in ductile regime machining of 6H SiC

Gaobo Xiao et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Ceramics

Interaction of Indentation-Induced Cracks on Single-Crystal Silicon Carbide

Cody Kunka et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Add to Collection

Article Engineering, Industrial

Shape adaptive grinding of CVD silicon carbide

Anthony Beaucamp et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Engineering, Industrial

Damage-free machining of monocrystalline silicon carbide

Hiroaki Tanaka et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Manufacturing

Brittle-ductile transition during diamond turning of single crystal silicon carbide

Saurav Goel et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Dislocations in 4H-and 3C-SiC single crystals in the brittle regime

Jean-Luc Demenet et al.

PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 10, NO 1 (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide

Saurav Goel et al.

COMPUTATIONAL MATERIALS SCIENCE (2012)

Add to Collection

Article Automation & Control Systems

Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces

De Ping Yu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Ceramics

A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide

Xichun Luo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Article Engineering, Industrial

Plasma assisted polishing of single crystal SiC for obtaining atomically flat strain-free surface

K. Yamamura et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)

Add to Collection

Article Automation & Control Systems

Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide

Zhiyu Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

Add to Collection

Article

Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting

Saurav Goel et al.

Nanoscale Research Letters (2011)

Add to Collection

Article Engineering, Manufacturing

Mechanism for material removal in diamond turning of reaction-bonded silicon carbide

Jiwang Yan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Silicon-carbide microfabrication by silicon lost molding for glass-press molds

Toru Itoh et al.

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)

Add to Collection

Article Engineering, Manufacturing

Ductile regime nanomachining of single-crystal silicon carbide

J Patten et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2005)

Add to Collection

Article Materials Science, Ceramics

Raman scattering characterization of polytype in silicon carbide ceramics: Comparison with X-ray diffraction

S Nakashima et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.