☆ 4.7 Article

Numerical simulation and experiment for the dynamic behavior of molten pool in ultrasonic-assisted MIG welding

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

A simulation-based approach to characterise melt-pool oscillations during gas tungsten arc welding

Amin Ebrahimi et al.

Summary: Numerical simulations offer a cost-effective and insightful alternative to experimental trial and error in development of welding and additive manufacturing procedures. This study presents a high-fidelity three-dimensional model to predict complex molten metal flow and surface oscillations in the melt pool during arc welding. Results show that melt-pool oscillations depend on pool shape, convection, process parameters, and material properties.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Analysis of molten pool dynamics in laser welding with beam oscillation and filler wire feeding

Won-Ik Cho et al.

Summary: In this study, molten pool flow and heat transfer in laser welding process with beam oscillation and filler wire feeding were calculated using CFD. The surface fluctuation was measured and analyzed with Fourier and wavelet transforms to study the beam oscillation frequency and buttonhole formation. The wavelet transform effectively analyzed rapid behaviors based on the change of frequency components over time.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Physics, Applied

Numerical study of molten metal melt pool behaviour during conduction-mode laser spot melting

Amin Ebrahimi et al.

Summary: The study shows that adjusting the absorbed energy flux affects the oscillatory fluid flow behavior in the melt pool, and consequently the predicted melt-pool shape and size. Additionally, changing the thermo-physical material properties artificially or using a non-deformable surface assumption lead to significant differences in melt pool oscillatory behavior.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Add to Collection

Article Thermodynamics

Numerical analysis of internal flow of molten pool in pulsed gas tungsten arc welding using a fully coupled model with free surface

Daqing Wang et al.

Summary: This paper introduces a new model to analyze the interaction of arc plasma and internal flow of molten pool in pulsed gas tungsten arc welding. By considering the range of pulsed current and oscillation frequency, and validating the model through experiments, it demonstrates the potential of multiphysics-based simulation methodology.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Chemistry, Physical

The Effect of Groove Shape on Molten Metal Flow Behaviour in Gas Metal Arc Welding

Amin Ebrahimi et al.

Summary: This study presents a computational model to describe the complex melt-pool behavior in root-pass gas metal arc welding, revealing the effects of groove shape on heat and fluid flow. Experiments were conducted to validate numerical predictions and demonstrate the robustness of the computational model. The model can be used to explore the physical effects of governing fluid flow and melt-pool stability during gas metal arc root welding.

MATERIALS (2021)

Add to Collection

Article Physics, Applied

The effects of process parameters on melt-pool oscillatory behaviour in gas tungsten arc welding

Amin Ebrahimi et al.

Summary: The study uses high-fidelity numerical simulations to investigate the effects of welding position, sulphur concentration, and travel speed on molten metal flow dynamics. The results show that changes in welding position alter the surface morphology of the pool, changes in sulphur concentration affect the Marangoni flow pattern, and increasing travel speed decreases the pool size and affects surface oscillations. Variations in internal flow patterns influence the evolution of melt-pool shape and surface oscillations.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Add to Collection

Review Automation & Control Systems

Review and analysis of heat source models for additive manufacturing

Mohamed I. Al Hamahmy et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Comparison of microstructure, mechanical properties, and corrosion behavior of Gas Metal Arc (GMA) and Ultrasonic-wave-assisted GMA (U-GMA) welded joints of Al-Zn-Mg alloy

Weifeng Xie et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Review Engineering, Manufacturing

Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives

Fuda Ning et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Engineering, Manufacturing

Numerical and experimental investigation of keyholing process in ultrasonic vibration assisted plasma arc welding

Junnan Qiao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Chemistry, Physical

Metallurgical Characterization of Penetration Shape Change in Workpiece Vibration-Assisted Tandem-Pulsed Gas Metal Arc Welding

Habib Hamed Zargari et al.

MATERIALS (2020)

Add to Collection

Article Thermodynamics

Numerical analysis of ultrasonic waves in the gas tungsten arc welding (GTAW) with ultrasonic excitation of current

Daqing Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Review Engineering, Manufacturing

Review of ultrasonic vibration-assisted machining in advanced materials

Zhichao Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

Add to Collection

Review Engineering, Manufacturing

Research status and future perspectives on ultrasonic arc welding technique

Yajie Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Thermodynamics

Elucidation of the weld pool convection and keyhole formation mechanism in the keyhole plasma arc welding

Dongsheng Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Physics, Applied

A novel electrode-arc-weld pool model for studying the keyhole formation in the keyhole plasma arc welding process

Dongsheng Wu et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2019)

Add to Collection

Article Thermodynamics

Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing

Xingwang Bai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Review Materials Science, Multidisciplinary

A Review on Melt-Pool Characteristics in Laser Welding of Metals

Behzad Fotovvati et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A Comprehensive Review on the Feasibility Study of Metal Inert Gas Welding

Rishav Sen et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Engineering, Industrial

Reduction of ductility-dip cracking susceptibility by ultrasonic-assisted GTAW

Chen Hua et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Engineering, Industrial

Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding

X. S. Gao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Process Stability of Ultrasonic-Wave-Assisted Gas Metal Arc Welding

Chenglei Fan et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Add to Collection

Review Engineering, Manufacturing

Application of ultrasonic vibrations in welding and metal processing: A status review

S. Kumar et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Article Engineering, Manufacturing

Numerical simulation of keyhole behaviors and fluid dynamics in laser-gas metal arc hybrid welding of ferrite stainless steel plates

C. S. Wu et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Article Thermodynamics

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

Xiangman Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Engineering, Manufacturing

Effect of fluid flow in the weld pool on the numerical simulation accuracy of the thermal field in hybrid welding

Zhuanzhuan Zhang et al.

JOURNAL OF MANUFACTURING PROCESSES (2015)

Add to Collection

Article Engineering, Manufacturing

Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds

Xin Wu et al.

JOURNAL OF MANUFACTURING PROCESSES (2015)

Add to Collection

Article Engineering, Industrial

Analysis of submerged arc welding process by three-dimensional computational fluid dynamics simulations

Dae-Won Cho et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

Add to Collection

Article Thermodynamics

Three-dimensional model for numerical analysis of thermal phenomena in laser-arc hybrid welding process

W. Piekarska et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling of hybrid laser-GMA welding: review and challenges

Z. H. Rao et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.