Related references
Note: Only part of the references are listed.Anisotropic thermomechanical fatigue of a nickel-base single-crystal superalloy Part I: Effects of crystal orientations and damage mechanisms
Cheng Luo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2023)
Planar-biaxial low-cycle fatigue behavior of the nickel-base alloy Inconel 718 at elevated temperatures under selected loading conditions
Marco Boecker et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2022)
A holistic approach to Thermo-Mechanical Fatigue phase angle effects for an aerospace nickel superalloy
V Gray et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading
Kai-Shang Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
A fully coupled chemo-mechanical cohesive zone model for oxygen embrittlement of nickel-based
Kim Louisa Auth et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)
High-temperature effects on creep-fatigue interaction of the Alloy 709 austenitic stainless steel
Zeinab Y. Alsmadi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
The influence of oxygen partial pressure on the crack propagation of superalloy under fatigue-creep-environment interaction
Minqing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Thermomechanical fatigue behaviour and damage mechanisms in a 9% Cr steel: Effect of strain rate
Peng Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Cycle-dependent creep-fatigue deformation and life predictions in a nickel-based superalloy at elevated temperature
Lv-Yi Cheng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Cyclic deformation and cracking behavior of 316LN stainless steel under thermomechanical and isothermal fatigue loadings
Bingbing Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A TMF crack propagation model considering time dependency and load sequence effects
Michael Rupp et al.
ENGINEERING FRACTURE MECHANICS (2020)
Correlations between microstructure evolution and mechanical behavior of a nickel-based single crystal superalloy with long-term aging effects
Xixi Yang et al.
MATERIALS CHARACTERIZATION (2020)
Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 718
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C
Xumin Zhu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
The influence of stress on the oxidation of a Ni-based superalloy
J. D. Ramsay et al.
CORROSION SCIENCE (2019)
Effect of temperature range on thermal-mechanical fatigue properties of P92 steel and fatigue life prediction with a new cyclic softening model
Jian-bin Wen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Isothermal and thermomechanical fatigue behavior of Inconel 718 superalloy
Wenkai Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: Stress assisted grain boundary oxidation or dynamic embrittlment?
R. Jiang et al.
CORROSION SCIENCE (2018)
Oxidation assisted intergranular cracking in 718 Nickel Superalloy: on the mechanism of dynamic embrittlement
Amanda de Vasconcelos Varela et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)
Service-like TMF tests for the validation and assessment of a creep-fatigue life procedure developed for GT blades and vanes
E. Vacchieri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Experimental investigation of the time and temperature dependent growth of fatigue crack in inconel 718 and mechanism based lifetime prediction
Michael Schlesinger et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
An investigation on crack growth rate of fatigue and induction heating thermo-mechanical fatigue (TMF) in Hastelloy X superalloy via LEFM, EPFM and integration models
M. Esmaeilzadeh et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
An approach to lifetime prediction for a wrought Ni-base alloy under thermo-mechanical fatigue with various phase angles between temperature and mechanical strain
Stefan Guth et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Creep-fatigue life prediction and interaction diagram in nickel-based GH4169 superalloy at 650 °C based on cycle-by-cycle concept
Run-Zi Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Creep damage and life assessment of thick-walled spherical reactor using Larson-Miller parameter
Abbas Loghman et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2017)
Image-based creep-fatigue damage mechanism investigation of Alloy 617 at 950 °C
Fraaz Tahir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanism-Based Modeling for Low Cycle Fatigue of Cast Austenitic Steel
Xijia Wu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Intergranular Oxidation Effects During Dwell-Time Fatigue of High-Strength Superalloys
Ulrich Krupp et al.
OXIDATION OF METALS (2017)
Thermo-Mechanical Fatigue Crack Growth of RR1000
Christopher John Pretty et al.
MATERIALS (2017)
Failure of metals II: Fatigue
Andre Pineau et al.
ACTA MATERIALIA (2016)
Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650°C
G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
On the mechanism of dynamic embrittlement and its effect on fatigue crack propagation in IN718 at 650°C
Hans-Juergen Christ et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Influence of phase angle on lifetime, cyclic deformation and damage behavior of Mar-M247 LC under thermo-mechanical fatigue
Stefan Guth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Aero-engine turbine blade life assessment using the Neu/Sehitoglu damage model
Abdullahi O. Abu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Creep-fatigue endurance of 304 stainless steels
Xiancheng Zhang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Intergranular crack tip oxidation in a Ni-base superalloy
L. Viskari et al.
ACTA MATERIALIA (2013)
An approach to life prediction for a nickel-base superalloy under isothermal and thermo-mechanical loading conditions
F. Voese et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Oxygen diffusion and crack growth for a nickel-based superalloy under fatigue-oxidation conditions
A. Karabela et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Hold-time effect on the thermo-mechanical fatigue crack growth behaviour of Inconel 718
Johan J. Moverare et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Thermomechanical fatigue behaviour of a third generation γ-TiAl intermetallic alloy
V. Bauer et al.
INTERMETALLICS (2009)
Thermo-mechanical fatigue and fracture of INCO718
W. J. Evans et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Thermo-mechanical fatigue of a polycrystalline superalloy: The effect of phase angle on TMF life and failure
S. Pahlavanyali et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Thermally activated fatigue mechanism and life prediction
J. Warren et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Stress rupture characteristics of Inconel 718 alloy for ramjet combustor
Duck-Hoi Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Study on creep-fatigue life prediction methods for low-carbon nitrogen-controlled 316 stainless steel (316FR)
Yukio Takahashi et al.
NUCLEAR ENGINEERING AND DESIGN (2008)
Effect of boron and carbon on thermomechanical fatigue of IN 718 superalloy - Part I. Deformation behavior
L. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Thermomechanical fatigue behavior and life prediction of a cast nickel-based superalloy
Z. W. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Improving resistance to dynamic embrittlement and intergranular oxidation of nickel based superalloys by grain boundary engineering type processing
U Krupp et al.
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Dynamic embrittlement - time-dependent quasi-brittle intergranular fracture at high temperatures
U Krupp
INTERNATIONAL MATERIALS REVIEWS (2005)
Brittle intergranular fracture of a Ni-base superalloy at high temperatures by dynamic embrittlement
U Krupp et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Modelling the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites
F Alexandre et al.
SCRIPTA MATERIALIA (2004)
Creep strain and creep-life prediction for Alloy 718 using the omega method
JT Yeom et al.
METALS AND MATERIALS INTERNATIONAL (2003)
Creep-fatigue failure of an aero engine turbine blades
I Salam et al.
ENGINEERING FAILURE ANALYSIS (2002)
Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures - An example of dynamic embrittlement
JA Pfaendtner et al.
ACTA MATERIALIA (2001)
Share Paper
