Related references
Note: Only part of the references are listed.Effect of intake temperature and coolant temperature with injection strategy on gasoline compression ignition combustion stability under the idle condition
Binyang Wu et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2023)
Collaborative optimization of fuel composition and operating parameters of gasoline compression ignition (GCI) engine in a wide load range
Pengwei Zhang et al.
FUEL (2022)
Analysis of ignition temperature range and surrogate fuel requirements for GCI engine
Fethi Khaled et al.
FUEL (2022)
Numerical study on the approach for super-high thermal efficiency in a gasoline homogeneous charge compression ignition lean-burn engine
Hao Yu et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)
Computational optimization of the piston bowl geometry for the different combustion regimes of the dual-mode dual-fuel (DMDF) concept through an improved genetic algorithm
Guangfu Xu et al.
ENERGY CONVERSION AND MANAGEMENT (2021)
Piston Bowl Geometry Effects on Gasoline Compression Ignition in a Heavy-Duty Diesel Engine
Meng Tang et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)
Development of a New Hybrid Stochastic/Trajectory Droplet Collision Model for Spray Simulations in Internal Combustion Engines
Shaoyi Suo et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)
Numerical Investigation on Mixture Formation and Combustion Process of Innovative Piston Bowl Geometries in a Swirl-Supported Light-Duty Diesel Engine
Federico Millo et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2021)
Impact of injection strategies on combustion characteristics, efficiency and emissions of gasoline compression ignition operation in a heavy-duty multi-cylinder engine
Buyu Wang et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2020)
Numerical investigation on low octane gasoline-like fuel compression ignition combustion at high load
Hu Wang et al.
FUEL (2020)
Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions
Leilei Xu et al.
APPLIED ENERGY (2020)
An Investigation of the Effects of the Piston Bowl Geometries of a Heavy-Duty Engine on Performance and Emissions Using Direct Dual Fuel Stratification Strategy, and Proposing Two New Piston Profiles
Sasan Shirvani et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2020)
Isolation of the parametric effects of pre-blended fuel on low load gasoline compression ignition (GCI)
John Roberts et al.
FUEL (2019)
Optimizing gasoline compression ignition engine performance and emissions: Combined effects of exhaust gas recirculation and fuel octane number
Chenxu Jiang et al.
APPLIED THERMAL ENGINEERING (2019)
Achieving high efficient gasoline compression ignition (GCI) combustion through the cooperative-control of fuel octane number and air intake conditions
Chenxu Jiang et al.
FUEL (2019)
Influence of piston bowl geometry on combustion and emission characteristics
Ramazan Sener et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2019)
Establishment of an improved heat transfer model based on an enhanced thermal wall function for internal combustion engines operated under different combustion modes
Jingjie Cao et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies
Tamilselvan Pachiannan et al.
APPLIED ENERGY (2019)
Experimental study on the influence of low-temperature combustion (LTC) mode and fuel properties on cyclic variations in a compression-ignition engine
Huiquan Duan et al.
FUEL (2019)
Homogeneous charge compression ignition (HCCI) and partially premixed combustion (PPC) in compression ignition engine with low octane gasoline
Yanzhao An et al.
ENERGY (2018)
An experimental investigation of the effects of fuel injection strategy on the efficiency and emissions of a heavy-duty engine at high load with gasoline compression ignition
Xionghui Zou et al.
FUEL (2018)
Diesel engine optimization with multi-objective performance characteristics by non-evolutionary Nelder-Mead algorithm: Sobol sequence and Latin hypercube sampling methods comparison in DoE process
Ali Navid et al.
FUEL (2018)
An efficient liquid film vaporization model for multi-component fuels considering thermal and mass diffusions
Yanzhi Zhang et al.
APPLIED THERMAL ENGINEERING (2017)
A review of design considerations for light-duty diesel combustion systems
Paul C. Miles et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2016)
Development of a quasi-dimensional vaporization model for multi-component fuels focusing on forced convection and high temperature conditions
Ping Yi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Development of a skeletal mechanism for diesel surrogate fuel by using a decoupling methodology
Yachao Chang et al.
COMBUSTION AND FLAME (2015)
A Simple Method to Predict Knock Using Toluene, N-Heptane and Iso-Octane Blends (TPRF) as Gasoline Surrogates
Gautam Kalghatgi et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2015)
DEVELOPMENT OF A NEW SPRAY/WALL INTERACTION MODEL FOR DIESEL SPRAY UNDER PCCI-ENGINE RELEVANT CONDITIONS
Yanzhi Zhang et al.
ATOMIZATION AND SPRAYS (2014)
A generalized renormalization group turbulence model and its application to a light-duty diesel engine operating in a low-temperature combustion regime
Bao-Lin Wang et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2013)
Advanced compression-ignition engines-understanding the in-cylinder processes
John E. Dec
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
A fast and elitist multiobjective genetic algorithm: NSGA-II
K Deb et al.
IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)
Comparisons of diesel spray liquid penetration and vapor fuel distributions with in-cylinder optical measurements
LM Ricart et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2000)